Outdoor CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes.
Use minimum 90°c supply conductors.
This product is safety listed for damp locations.
1A
3
DIFFUSER BASE FIXTURE
LAMP
1
DIFFUSER
DIFFUSER COVER COVER SCREW
2
2
1
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage Information.
2
Insert the diffuser into the diffuser base, then install the diffuser cover to the bottom of the fixture and secure it in place using the cover screws.
3
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents
Les fils d’alimentation doivent convenir pour 90°c. 1A
3
BASE DE DIFFUSEUR LUMINAIRE
AMPOULE
1
DIFFUSEUR
COUVERCLE DE DIFFUSEUR VIS DE COUVERCLE
2
2
1
Visser l’ampoule dans la douille. Reportez-vous à l'étiquette sur la prise pour Max Wattage information.
2
Insérez le diffuseur dans la base du diffuseur, puis installer le couvercle du diffuseur au fond de luminaire et de le fixer en place à l'aide des vis du couvercle.
3
Suivez les instructions d'installation de suppléments fermés pour l'installation électrique et appareil sur une boîte de sortie de la maison.
2
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone.
Conductores de alimentacion 90°c Min.
1A
3
BASE DE DIFUSOR LAMPARA
BOMBILLA
1
DIFUSOR
CUBIERTA DEL DIFUSOR TORNILLO DE LA CUBIERTA
2
2
1
Atornille la bombilla en el enchufe. Consulte la etiqueta en la toma de Max Información de Potencia.
2
Inserte el difusor en la base del difusor, a continuación, instalar la cubierta del difusor de la parte inferior de la lámpara y asegurarlo en su lugar con los tornillos de la cubierta.
3
Siga las instrucciones de instalación de suplementos cerrados para la instalación eléctrica y el accesorio sobre la caja de salida de casa.
Determine the height of the fixture with the provided stems and assemble them by screwing them together. Secure the mounting plate to the junction box.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information. Place the cover onto the frame nipple and secure it in place by screwing the cap onto the nipple. 6. CAUTION RISK OF FIRE. -. This product must be installed
Secure the mounting plate to the junction box. Connect the fixture to a suitable ground in accordance to local electrical codes. Connect the white fixture wire ...
Refer to the label on the socket for Max Wattage information. Follow enclosed supplement installation ... without notification. A Generation Brands Company.
Connect the white driver wire to the neutral power line wire with a wire nut. ... Insert the glass panels into the housing and secure them using the glass panel ...
From the end of the cord, strip the insulation 4â and then strip the end of the ... with the construction and operation of the product ... A Generation Brands Company.
the applicable installation code by a person familiar with the construction and operation ... código de instalación aplicable por una persona familiarizada con la ...
For a complete list of dimmers, visit out website at www.Feiss.com. This instruction shows a .... improvements without notification. A Generation Brands Company.
Secure the mounting plate to the electrical box with two mounting plate screws. ... Connect the black fixture wire (round and/or smooth) to the hot power line wire ...
CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and ...
Follow enclosed supplement installation instructions for electrical and fixture installation onto junction box. Screw the lamps into ... A Generation Brands Company.
Screw a nut onto one end of the threaded pipe, then place the shade and a washer over the other end of the threaded pipe and secure them together by ...
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring. Insert the shade into the frame and place it over the socket. Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
For slope ceiling applications, rotate swivel at the top of the stem to ensure luminaire is aiming down (Fig.3). 9. To prevent moisture from entering the outlet.
registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification. A Generation Brands Company.
