For a complete list of dimmers, visit out website at www.Feiss.com. This instruction shows a .... improvements without notification. A Generation Brands Company.
CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
This product is safety listed for wet locations. For a complete list of dimmers, visit out website at www.Feiss.com
Use minimum 90°c supply conductors.
This instruction shows a typical installation.
1A CAP COUPLER COVER
FRAME THUMB SCREW PLATE
DIFFUSER GLASS
2
THREADED PIPE LED ASSEMBLY
FIXTURE
8
8
POST SCREW
6
7 POST
1
Insert the glass into the fixture, then insert the diffuser into the fixture.
2
Place the two plates on top of the LED assembly and secure it in place using the thumb screws.
3
Place the frame over the threaded pipe and onto the LED assembly and secure them using the coupler.
4
Place the cover over the threaded pipe and secure it by screwing on the cap.
5
Connect the fixture to a suitable ground in accordance to local electrical codes.
6
Connect the white fixture wire to the neutral power line wire with a wire nut.
7
Connect the black fixture wire to the hot power line wire with a wire nut.
8
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
1
1.2
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents
Les fils d’alimentation doivent convenir pour 90°c. 1A CAPUCHON COUPLEUR COUVERCLE
CADRE VIS DE POUCE PLAQUE
DIFFUSEUR VERRE
2
TUYAU FILETÉ ENSEMBLE LED
LUMINAIRE
8
8
VIS DE POSTE
6
7 POSTE
1
Insérez le verre dans le luminaire, puis insérez le diffuseur dans le luminaire.
2
Placez les deux plaques sur le dessus de l'assemblage LED et les fixer en place à l'aide des vis de pouce.
3
Placez le diffuseur et le cadre sur le tuyau fileté et sur l'ensemble LED et les fixer à l'aide de coupleur.
4
Placez le couvercle sur le tuyau fileté et fixez-le en vissant sur le couvercle.
5
Connectez le luminaire à un terrain approprié en accord avec les codes électriques locaux.
6
Connectez le fil blanc de luminaire au fil de ligne à neutre avec un écrou de fil.
7
Connectez le fil noir de luminaire au fil chaud de la ligne d'alimentation avec un écrou de fil.
8
Fixez le luminaire à la poste avec les vis de poste en s'assurant de rentrer facilement dans tout le câblage.
2
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone.
Conductores de alimentacion 90°c Min.
1A CAPUCHON ACOPLADOR CUBIERTA
MARCO TORNILLO DE PULGAR PLACA
DIFUSOR VIDRIO
2
TUBO ROSCADO ASAMBLEA LED
LÁMPARA
8
8
TORNILLO DEL POSTE
6
7 POSTE
1
Inserte el vidrio en la lámpara, luego inserte el difusor en la lámpara.
2
Coloque las dos placas en la parte superior del conjunto de LED y asegúrelas en su lugar con los tornillos de pulgar.
3
Coloque el difusor y el marco sobre el tubo roscado y en la asamblea LED y asegurarlas con el acoplador.
4
Instale la cubierta colocándola sobre el tubo roscado y fijarlo atornillando en la cubierta.
5
Conecte la lámpara a una tierra adecuada de acuerdo con los códigos eléctricos locales.
6
Conecte el cable blanco de la lámpara al cable de línea de alimentación neutra con una tuerca para cable.
7
Conecte el cable negro de la lámpara al cable de línea eléctrica caliente con una tuerca para cable.
8
Fije la lámpara al poste con los tornillos del poste a meter cuidadosamente hacer seguro en todo el cableado.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information. Place the cover onto the frame nipple and secure it in place by screwing the cap onto the nipple. 6. CAUTION RISK OF FIRE. -. This product must be installed
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring. ... Place the cover over the frame and secure it in place by screwing the finial onto the nipple ... Feiss reserves the right to ... A Generation Brands Com
Insert the diffuser into the diffuser base, place the LED assembly on top of the diffuser, and secure it to the top of the housing ... A Generation Brands Company.
Connect the white driver wire to the neutral power line wire with a wire nut. ... Insert the glass panels into the housing and secure them using the glass panel ...
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring. Insert the shade into the frame and place it over the socket. Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information.
This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. 2. POST. POST SCREW. 3. 4. 4. GL
Connect the black fixture wire to the hot power line wire with a wire nut. ... Refer to the label on the lamp socket for Max Wattage information. Install the glass ...
Determine the height of the fixture with the provided stems and assemble them by screwing them together. Secure the mounting plate to the junction box.
NEC junction boxes. This product is safety listed for damp locations. For a complete list of dimmers, visit out website at www.Feiss.com. CAUTION RISK OF FIRE.Termes manquants :
Install the glass panels by carefully sliding them into the housing and securing ... Connect the white fixture wire to the neutral power line wire with a wire nut.
Refer to the label on the socket for Max Wattage information. Follow enclosed supplement installation ... without notification. A Generation Brands Company.
Newport Outdoor Post. 1.1. OL14307. OL14307. Connect the fixture to a suitable ground in accordance to local electrical codes. Connect the white fixture wire to ...
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes. Connect the white driver wire to the neutral power line wire with a wire nut. Connect the black driver wire to the hot power line wire with a wire nut. Moun
Connect the black fixture wire to the hot power line wire with a wire nut. Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
44 Harbor Park Drive • Port Washington, NY 11050 ... Place the fixture over the mounting back plate and secure with mounting screws (B) and rubber gaskets ...
Connect the fixture to a suitable ground in accordance to local electrical codes. Connect the white fixture wire to the neutral power line wire with a wire nut. Connect the black fixture wire to the hot power line wire with a wire nut. Secure the fix