Connect the fixture ground wire to a suitable ground in accordance to local electrical codes. Connect the white driver wire to the neutral power line wire with a wire nut. Connect the black driver wire to the hot power line wire with a wire nut. Mount the fixture base onto the mounting plate and secure it with the fixture screws. 1.
Wall GENERAL PRODUCT INFORMATION: CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
These fixtures are intended to be installed utilizing NEC compliant junction boxes. This product is safety listed for damp locations.
Use minimum 90°c supply conductors.
For a complete list of dimmers, visit out website at www.Feiss.com
1A JUNCTION BOX
FIXTURE SCREW
1
FIXTURE BASE
3 5
1
4 5 MOUNTING PLATE
1
Secure the mounting plate to the junction box.
2
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
3
Connect the white driver wire to the neutral power line wire with a wire nut.
4
Connect the black driver wire to the hot power line wire with a wire nut.
5
Mount the fixture base onto the mounting plate and secure it with the fixture screws.
1
1.0
MISE EN GARDE - RISQUE D'INCENDIE Ce produit doit être installé selon le code d’installation pertinent , par une personne qui connaÎt bien le produit et son fonctionnement ainsi que les risques inhérents
Les fils d’alimentation doivent convenir pour 90°c. 1A BOÎTE DE JONCTION
VIS DE LUMINAIRE
1
BASE DE LUMINAIRE
3 5
1
4 5 PLAQUE DE MONTAGE
1
Fixez la plaque de montage à la boîte de jonction.
2
Connectez le fil de terre de luminaire à un terrain approprié conformément aux codes électriques locaux.
3
Connectez le fil blanc de luminaire au fil de ligne à neutre avec un écrou de fil.
4
Connectez le fil noir de luminaire au fil ligne électrique chaud avec un serre-fils.
5
Montez la base de luminaire sur la plaque de montage et le fixer avec les vis de luminaire.
2
ADVERTENCIA - RIESGO DE INCENDIO Este productor debe ser instalado segun el codigo de instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone.
Conductores de alimentacion 90°c Min.
1A CAJA DE JUNCTURA
TORNILLO DE LA LÁMPARA
1
BASE DE LA LÁMPARA
3 5
1
4 5 PLACE DE MONTAJE
1
Fije la placa de montaje a la caja de junctura.
2
Conecte el cable de tierra de la lámpara a una tierra de acuerdo a los códigos eléctricos locales.
3
Conecte el cable blanco del conductor al cable de energía de la línea neutral con un tapón de alambre.
4
Conecte el cable negro del conductor al cable de alimentación de línea caliente con un tapón de alambre.
5
Monte la base de la lámpara en la placa de montaje y fijarlo con los tornillos de la lámpara.
F 455, F 457, F 458. M. M. M. CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar ...
CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors.
Connect the white driver wire to the neutral power line wire with a wire nut. ... Insert the glass panels into the housing and secure them using the glass panel ...
For a complete list of dimmers, visit out website at www.Feiss.com. This instruction shows a .... improvements without notification. A Generation Brands Company.
Determine the height of the fixture with the provided stems and assemble them by screwing them together. Secure the mounting plate to the junction box.
https://caleresort.com/yucatan -
Chablé Resort & Spa is a resort that offers a first quality service with facilities that identify the Mayan culture. Chablé Resort has an ideal Spa to relax, also offers natural treatments since it is located in a na
NEC junction boxes. This product is safety listed for damp locations. For a complete list of dimmers, visit out website at www.Feiss.com. CAUTION RISK OF FIRE.Termes manquants :
Secure the mounting plate to the junction box. Connect the fixture ground wire to a suitable ground in accordance to local electrical codes. Connect the white ...
Sophie 1, 2, 3, and 4 Light Vanity Strip. 1.1. VS47002-VS47003-VS47004-WB1724. VS47002,VS47003,. VS47004,WB1724. Secure the mounting plate to the electrical box with the two mounting plate screws. Connect the fixture ground wire to a suitable ground
Install the glass panels by carefully sliding them into the housing and securing ... Connect the white fixture wire to the neutral power line wire with a wire nut.
https://chableresort.com/yucatan/ -
Chablé Resort & Spa is a resort that offers a first quality service with facilities that identify the Mayan culture. Chablé Resort has an ideal Spa to relax, also offers natural treatments since it is located in a
You can decorate your Cupcake with a completely new outfit, matching hand bag ... music to get ready to, and a charm to share with your Cupcake. CONTENTS: ... to hear per- ... Blueberry Bell ... located at the end of this instruction manual.
If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate completely ... If any part is missing or damaged, do not attempt to.
Mark the anchor hole locations on the mounting plate and remove the mounting plate. ... Connect the black fixture wire to the hot power line wire with a wire nut.
A. Installez les supports pour les coins extérieurs de la grande abat-jour. B. Installez la grande abat-jour en plaçant au sommet de l'armature principale.
At the desired wall location, install two. J-hooks into wall at corresponding position with two hanging loops. Note: Use a level to insure mounting position is.
Screw the lamp into the socket. Refer to the label on the socket for Max Wattage information. Place the cover onto the frame nipple and secure it in place by screwing the cap onto the nipple. 6. CAUTION RISK OF FIRE. -. This product must be installed
Install the tethered chains by hooking them to the bottom of the fixture, then place the cups onto the threads under the sockets and secure them in place by ...