FAST RECOVERY RECTIFIER DIODES FAST RECOVERY RECTIFIER VERY LOW REVERSE RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING
SUITABLE APPLICATION FREE WHEELING DIODE IN CONVERTERS AND MOTORS CIRCUITS RECTIFIER IN S.M.P.S.
F 126 (Plastic)
ABSOLUTE RATINGS (limiting values) Symbol
Parameter
Value
Unit
IFRM
Repetive Peak Forward Current
tp ≤ 10µs
30
A
IF (AV)
Average Forward Current*
Ta = 70°C δ = 0.5
1
A
IFSM
Surge non Repetitive Forward Current
tp = 10ms Sinusoidal
30
A
Power Dissipation*
Ta = 70°C
1.33
W
- 40 to +150 - 40 to + 150
°C
P Tstg Tj
Storage and Junction Temperature Range
Symbol
Parameter
Value
Unit
VRRM
Repetitive Peak Reverse Voltage
400
V
VRSM
Non Repetitive Peak Reverse Voltage
440
V
THERMAL RESISTANCE Symbol Rth (j - a)
Parameter Junction-ambient*
Value
Unit
60
°C/W
* On infinite heatsink with 10mm lead length.
October 1999 Ed : 1A
1/5
BYT 01-400 ELECTRICAL CHARACTERISTICS STATIC CHARACTERISTICS Symbol IR
Test Conditions Tj = 25°C
Min.
Typ.
VR = VRRM
Tj = 100°C VF
Tj = 25°C
IF = 1A
Max.
Unit
20
µA
0.5
mA
1.5
V
1.4
Tj = 100°C
RECOVERY CHARACTERISTICS Symbol trr
Test Conditions
Min.
Typ.
Max.
Unit ns
Tj = 25°C
IF = 1A
diF/dt = - 15A/µs
VR = 30V
55
Tj = 25°C
IF = 0.5A
IR = 1A
Irr = 0.25A
25
TURN-OFF SWITCHING CHARACTERISTICS (Without Series inductance) Symbol
Test Conditions
tIRM
diF/dt = - 50A/µs
Tj = 100°C
IRM
diF/dt = - 50A/µs
Lp ≤ 0.05 µA
VCC = 200 V See figure 12
Min. IF = 1A
Typ.
Max.
Unit
35
50
ns
1.5
2
A
To evaluate the conduction losses use the following equations: VF = 1.05 + 0.145 IF P = 1.05 x IF(AV) + 0.145 IF2(RMS)
2/5
BYT 01-400 Fi g ur e 1. Ma xi mu m av erag e po wer dissipation versus average forward current.
Figure 2. Average forward current versus ambient temperature.
Figure 3. Thermal resistance versus lead length.
Mounting n°1 INFINITE HEATSINK
Mounting n°2 PRINTED CIRCUIT
Figure 5. Peak forward current versus peak forward voltage drop (maximum values).
Figure 4. Transient thermal impedance junction-ambient for mounting n°2 versus pulse duration (L = 10 mm).
3/5
BYT 01-400 Figure 7. Recovery time versus diF/dt.
Figure 8. Peak forward voltage versus diF/dt.
Figure 9. Peak reverse current versus diF/dt.
Figure 10. Recovered charge versus diF/dt (typical values).
Figure 11. Dynamic parameters versus junction temperature.
Figure 12. Non repetitive surge peak current versus number of cycles.
4/5
BYT 01-400 PACKAGE MECHANICAL DATA F 126 (Plastic)
C
D
D REF.
C
A
B
DIMENSIONS Millimeters
Inches
Min.
Typ.
Max.
A
6.05
6.20
6.35 0.238 0.244 0.250
B
2.95
3.00
3.05 0.116 0.118 0.120
C
26
D
0.76
31 0.81
Min.
1.024
Typ.
Max.
1.220
0.86 0.030 0.032 0.034
Marking: type number Cooling method: by convection (method A) Weight: 0.393g
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
Unit. VRRM. Repetitive peak reverse voltage. 200. V. IF(RMS). RMS forward ... Symbol. Test Conditions. Min. Typ. Max. Unit. IR *. Tj = 25°C. VR = VRRM. 10. µA.
Transient thermal impedance, Zth j-mb (K/W). D = tp tp. T. T. P t. D. 1. 100. 100. 10. 1. 10. 1000. BY329. Cd / pF. VR / V. September 1998. 4. Rev 1.200 ...
provides the information needed to install, maintain, and operate the system and the Intel ... previous experience with an interactive computer system will take the quick ... contains information on the organization and use of this manual and ... Uni
module derives its power from the PC via the parallel interface; thus, no additional .... Files are always saved in JEDEC format and include both the fuse map.
copyright owner. ... information presented in this document does not form part of any quotation or contract, it is believed to be ... from such improper use or sale.
copyright owner. ... information presented in this document does not form part of any quotation or contract, it is believed to be ... from such improper use or sale.
Detailed information on software (descriptions and applications) and hard- ... The demanding requirements of the mid-range control-oriented microprocessor market. (low cost) can be met with the M6805 HMOS/M146805 CMOS Families of ... Control-oriented
Features. ⢠Access time 250/350/450ns (max.) ⢠Single +5V ±1 0% power supply. ⢠TT L compatible inputs and outputs. ⢠Three-state outputs. General Description.
the 3-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a standard LS output with additional drive capability to permit the ...
3.22 Load Disk File into Buffer . ... 3.25 Program Buffer Contents to PLD . .... The EPROM programmer is easy to install and is good to work with an IBM.
all Teru driven and easy to list, The progra II's on the floppy disk directly control the hardware .... CN For the PRCM:LIic MEGA Jrugruit litting utilities. PLDSSSS.
BURRS ARE ALLOWED ONLY IF FULL LENGTH OF LEADS WILL PASS THROUGH .... DRAWING. NUMBER. â (2 X 3°). S. 1604.002 -. 2X 5° --. Z 2X R.010. 2. X ... 3x .015. 002 F .0604.010 . 1254.015. + - 0. 3X .0154.002. ELECTROSTATIC.
Mar 25, 2003 - Applications ... conditions set forth in the âHandling Guide for Semiconductor Devices,â or âTOSHIBA Semiconductor Reliability. Handbookâ etc.
WARNING: Forbid short-circuit, charge between"+" and"-". Forbid over-discharge, fire, damage. Finish sealing less more 5 seconds at. Take out the battery when ...
functions for universal motor speed control in washing machines. It operates in closed ... ELECTRICAL CHARACTERISTICS (continued). Characteristic. Symbol ... Additionally, the TDA 1085C protects the whole system against AC line stop or .... the integ
The TDA 1420 is a monolithic integrated circuit in Pentawatt plastic package consisting of a pair of ... DC motor driver. - stepping motor ... output stage for vertical deflection systems in colour TV etc. ABSOLUTE ... ELECTRICAL CHARACTERISTICS (con
