undesired operation. This equipment has been tested and found to comply with the limits for Class B Digital Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment ...
This device complies with Part 15 rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for Class B Digital Devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the product manuals, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, the user is encouraged to do one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced RF service technician for help.
The end product must be labeled, in a visible area, with the following: Contains FCC ID: I28MD-FXLAN11AC
Modification Warning The user is cautioned that any changes or modifications not expressly approved by Zebra Technologies could void the user’s authority to operate the equipment. To ensure compliance, this printer must be used with fully shielded communication cables.
RF Exposure Statement This transmitter complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures.
Canadian DOC Compliance Statement Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. This Class B digital apparatus complies with Canadian ICES-003.
Industry Canada (IC) Warning Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) This device may not cause interference., 2) This device must accept any interference, including interference that may cause undesired operation of the device. The end product must be labeled, in a visible area, with the following: Contains IC: 3798B-FXLAN11AC
Approved Antenna information Only Zebra approved antennas are allowed and cannot be user replaceable.
General The 802.11ac radio module has been certified as a Full Modular. Additional evaluation is required for use in all host devices. The following describes the installation procedures for the various hosts in which the module has been evaluated.
Installation Instructions for Zebra printers The 802.11ac radio module is not intended for OEM Integrators or end users. it can only be installed at the grantee manufacturing facility.
accordance with the instructions, may cause harmful interference to radio communications. ... Consult the dealer or an experienced radio/TV technician for help. .... Chapter 1: I ntroduction. Description. The AM7520 is an 802.11ac/b/g/n 2.4G+5G USB m
L/A terminal sends continuous output when thermostat is set to EM HEAT mode, .... "A" or "L/A" terminal must be configured for Economizer in the installer setup. These terminals are powered by the cooling transformer. (Rc terminal). Terminal AUX 2 is
If you have a D0Link Cloud Router, you can take advantage of Zero Configuration Setup. This feature automatically configures your camera,s settings for you and adds it to your mydlink account. If you do not have a D.Link Cloud Router, you can use the
Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is.
Operation Guide for. 1. Product Overview. FANW wireless module is a proprietary. Automotive Systems, Inc. The modem. (DCMs) designed and produced by Conti installed into vehicles during the OEM's without use of special tools. Primary connections to T
simple access to the wireless devices. Its main application is an RF interface in a security system that communicates PG messages. The transceiver features UART and USB ports that can be applied to the host of Control panel. Mechanical support and ..
For all future uses please turn on both speakers and wait for them to connect. Note that it may take up to 1 minute for them to pair automatically even after initial use, but here should be no need to press Connect Speaker button again. If any pairin
Make sure all items listed in Box Contents at the beginning of this guide are included in the box. 2. READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT. 3. Move Light Mode switch to OFF. 4. Turn down the Master Volume on the House Party. 5. Tu
Your BRAVEN will remember the last 8 devices it has paired with. NOT E : If your BRAVEN is lef t on with an inactive Bluetooth® connection for 2 hours, it will automatically power of f. Power your BRAVEN on again by pressing and holding the power bu
Using the Mouse. (A) Remove the USB receiver from battery compartment at the bottom of the mouse. (B) Plug the USB receiver into an available USB port on your computer. (C) This mouse is a plug and play device. It will automatically operate when the.
The Technicolor TG1700(d)ac is a high-speed Gigabit Passive Optical. Network (GPON) triple-play gateway taking advantage of the latest developments in Fiber To The Home (FTTH), while at the same time guaranteeing the highest quality of service. With
18 juil. 2016 - may lead to the violation of FCC/IC limit and is prohibited. Installation procedure. Please refer to user's manual for the detail. w Warning: Please carefully select the installation position and make sure that the final output power
(See APP setup procedure for phone mode settings). * Set up backlight and service reminder when entering the setup mode the second time. Lorsque vous ...
Use only the antennas which have been approved by the applicant. The non-approved antenna(s) may produce unwanted spurious or excessive RF transmitting ...
24 avr. 2016 - expressly approved by Master Meter could void warranty and the user's authority to operate the equipment. ... to radio or television reception, which can be determined by turning the equipment off and on, the user is ... The installati
(See APP setup procedure for phone mode settings). * Set up backlight and service reminder when entering the setup mode the second time. Lorsque vous ...
Regulatory Information. USA-Federal Communications ... for compliance could void the user's authority to operate the equipment. Labeling. System integrators ...
or systems Targeting Compliance with worldwide radio frequency s : ETSI EN 300 328 and EN 300 440 Class 2 ... band Automation, Including Auto-Acknowledgment and Address. Relevant Registers in All Power Modes .... uct can be kept as far as possible fr
Google Playâ¢. Google Chromeâ¢. Google Play is a trademark of Google Inc. The Google Play store allows you to download apps, music, movies, and games ...
4.) Do NOT apply excessive force to any surfaces of the unit when wet or in a wet environment. 5.) Do NOT use or store the unit in places with high temperature. 6.) AVOID prolonged exposure to ultraviolet radiation (UV sunlight) and strong magnetic f
Android, Google Play, Google Maps, Google Talk are trademarks of Google Inc. Rovio entertainment ... Use of this trademark is subject to Google Permissions.