5. Notice For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC/IC on the product and in the Installation manual Notice. Please describe the following warning on the final product which contains this module. Contains Transmitter Module FCC ID:VPYLB1FJ
or
Contains FCC ID: VPYLB1FJ
Contains Transmitter Module IC :772C-LB1FJ
or
Contains IC: 772C-LB1FJ
This device complies with Part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ※When the product is small, as for these words mentioned above, the posting to a manual is possible.
●Please describe the following warning to the manual. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
5. Notice ●When installing it in a mobile equipment. Please describe the following warning to the manual. This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou plus entre le radiateur et le corps humain.
5. Notice ●When installing it in a portable equipment. If portable equipment use only BT/BLE.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply without testing of specific absorption rate (SAR).
In the case of conditions other than the above.
The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF)in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. TYPE1FJ has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules.
Les connaissances scientifiques dont nous disposons n’ont mis en évidence aucun problèmede santé associé à l’usage des appareils sans fil à faible puissance. Nous ne sommes cependant pas en mesure de prouver que ces appareils sans fil à faible puissance sont entièrement sans danger. Les appareils sans fil à faible puissance émettent une énergie fréquence radioélectrique (RF) très faible dans le spectre des micro-ondes lorsqu’ils sont utilisés. Alors qu’une dose élevée de RF peut avoir des effets sur la santé (enchauffant les tissus), l’exposition à de faibles RF qui ne produisent pas de chaleur n’a pas de mauvais effets connus sur la santé. De nombreuses études ont été menées sur les expositions aux RF faibles et n’ont découvert aucun effet biologique. Certaines études ont suggéré qu’il pouvait y avoir certains effets biologiques, mais ces résultats n’ont pas été confirmés par des recherches supplémentaires. TYPE1FJ a été testé et jugé conforme aux limites d’exposition aux rayonnements énoncées pour un environnement noncontrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC.
It is necessary to take a SAR test with your set mounting this module. (It is no need to take test for only BT/BLE on FCC.) Class II permissive change application is necessary using the SAR report. Please contact Murata.
Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm.
29 juin 2016 - 29 June 2016. 1. Notice or. â»When the product is small, as for these words mentioned above, the posting to a manual is possible. Contains Transmitter Module FCC ID:VPYLB1EU. Contains FCC ID: VPYLB1EU. This device complies with Part 1
16 nov. 2016 - This equipment complies with FCC/IC radiation exposure limits set forth ... the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of ...
L/A terminal sends continuous output when thermostat is set to EM HEAT mode, .... "A" or "L/A" terminal must be configured for Economizer in the installer setup. These terminals are powered by the cooling transformer. (Rc terminal). Terminal AUX 2 is
compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. [for IC]. 5150-5250MHz and 5250-5350MHz bands are restricted to indoor oper
User Manual. 5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan. Product Name: WLAN Complete Module. Model number: VRL4149-0601F. GENERAL. This product is a 2.4/5GHz Wireless Communication module that uses WLAN (Wireless. LAN) technology. This M
Operation is subject to the following two conditions: (1) this device may not ... Connect the equipment into an outlet on a circuit different from that to which.
Choose the Aux or S/PDIF mode. Connect one end of the included 3.5mm audio cable to the 3.5mm audio jack or the Toslink optical cable to the S/PDIF output on the BR-O2, and connect the other end of the cable to your audio output device (TV, computer,
Do not touch the product while switching the lamp on and off. Failure to do so may result in a burn. - You can check the list of compatible dimmers and transformers on the Samsung Electronics homepage or through the dealer you bought the lamp from. !
3 juin 2016 - However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and o
20 avr. 2017 - Information in this document is subject to change without prior notice. 2. 1. FCC & ISEDC Statement. 1.1. FCC Caution. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's au
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Expo
and relative humidity do not exceed 5 to 40È and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. 3. Storage conditions. Parameter. Min. Typ. Max. Unit. Operating Temperature. 0. -. +70. È. O
About the manuals. 1. Instruction Manual (this manual). 2. (Startup Guide). The Startup Guide describes the following: ⢠Basic operating instructions of your WALKMAN®. ⢠How to access useful PC applications websites on the internet. 3. Help Guid
For the details about this module, please refer to the specification sheet of module. ... The following information must be indicated on the host device of this ...
directly. Therefore there is no user manual of this device. The following information must be described on the user manual of the vehicle;. User Manual.
21 oct. 2016 - Reitre la Estrella de la Muerte de su base, presione y mantenga el botón de encendido del altavoz por 3 segundos hasta que se apague. 2. Desconectar y desenchufar el adaptador de la corriente de la base. 3. Mantenga separada la Estrell
11 janv. 2017 - the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele
the device you want to listen to by stopping play on one device, then pressing play on the desired device. DUAL DEVICE OFF ... FACTORY RESET. Hold down MFB and Volume + Button at the same time for five seconds. CAUTION. Factory reset erases all paire
This device complies with part 15 of the FCC Rules. Operation is subject ... compliance could void the user's authority to operate the equipment. This transmitter ...
