Jan 19, 2009 - Developed Shapes. CATIA V5 Training .... a New Part. 5 min. In this step, you will use ASD functionalities to insert a new part in the assembly.
Version 5 Release 19 January 2009 EDU_CAT_EN_DL1_FX_V5R19
1
Developed Shapes Student Notes:
Table of Contents Master Exercise
4 6 8 10 12 14
Copyright DASSAULT SYSTEMES
Step 1: Curve Development Step 2: Creating Reinforcements Step 3: Insert a New Part Step 4: Create Three Holes and Unfold Step 5: Create an Opening Step 6: Unfold the Geometry
3
Copyright DASSAULT SYSTEMES
2
Developed Shapes
Master Exercise
Student Notes:
Water Bottle and its Support 45 min
Copyright DASSAULT SYSTEMES
In this exercise, you will practice the different "Develop Shapes" tools to build a water bottle and its support.
Copyright DASSAULT SYSTEMES
3
Developed Shapes
Water Bottle and its Support
Student Notes:
Water Bottle Geometry (Step 1): Curve Development 5 min
Copyright DASSAULT SYSTEMES
In this step you will develop the pre-created sketch on the bottle surface.
Copyright DASSAULT SYSTEMES
4
Developed Shapes
Do It Yourself
Student Notes:
Part used: Water_bottle_step_01.CATProduct
Copyright DASSAULT SYSTEMES
Select Water_Bottle_step_01.CATPart to edit it. Develop the sketch.2 on the bottle.
Copyright DASSAULT SYSTEMES
5
Developed Shapes
Water Bottle and its Support
Student Notes:
Water Bottle Geometry (Step 2): Creating Reinforcements 15 min
Copyright DASSAULT SYSTEMES
In this step, you will create the reinforcement using the development made in step 1 and GSD tools.
Copyright DASSAULT SYSTEMES
6
Developed Shapes
Do It Yourself
Student Notes:
Part used: Water_bottle_step_02.CATProduct
Copyright DASSAULT SYSTEMES
Select Water_Bottle_step_02.CATPart to edit it. Using sketch.3 and the development on the surface create a sweep. Do rectangular pattern on the cylinder. Join and Trim the reinforcements. Use edge fillet function to have the final bottle shape.
Copyright DASSAULT SYSTEMES
7
Developed Shapes
Water Bottle and its Support
Student Notes:
Water Bottle Geometry (Step 3): Insert a New Part 5 min
Copyright DASSAULT SYSTEMES
In this step, you will use ASD functionalities to insert a new part in the assembly.
Copyright DASSAULT SYSTEMES
8
Developed Shapes
Do It Yourself
Student Notes:
Part used: Water_bottle_step_03.CATProduct
Copyright DASSAULT SYSTEMES
Insert Bottle_support_start.CATPart in the product.
Copyright DASSAULT SYSTEMES
9
Developed Shapes
Water Bottle and its Support
Student Notes:
Support Geometry (Step 4): Create Three Holes and Unfold 10 min
Copyright DASSAULT SYSTEMES
In this step, you will unfold a surface you modified.
Copyright DASSAULT SYSTEMES
10
Developed Shapes
Do It Yourself
Student Notes:
Part used: Water_bottle_step_04.CATProduct
Copyright DASSAULT SYSTEMES
Create a sketch on ZX plane with 3 holes and extrude it. Split the cylinder with the holes. Create the tearing line in a sketch with plane.4 as support. Project the sketch on the surface. Unfold the geometry on plane.2
Copyright DASSAULT SYSTEMES
11
Developed Shapes
Water Bottle and its Support
Student Notes:
Support Geometry (Step 5): Create an Opening 5 min
Copyright DASSAULT SYSTEMES
In this step you will create an opening using GSD tools.
Copyright DASSAULT SYSTEMES
12
Developed Shapes
Do It Yourself
Student Notes:
Part used: Water_bottle_step_05.CATProduct
Copyright DASSAULT SYSTEMES
Create a sketch on YZ plane. Extrude it and split the cylinder with it. Create a Parallel Curve. Create a plane.5 offset to Plane.2.
Copyright DASSAULT SYSTEMES
13
Developed Shapes
Water Bottle and its Support
Student Notes:
Support Geometry (Step 6): Unfold the Geometry 5 min
Copyright DASSAULT SYSTEMES
In this step, you will unfold the final geometry.
Copyright DASSAULT SYSTEMES
14
Developed Shapes
Do It Yourself
Student Notes:
Part used: Water_bottle_step_06.CATProduct
Copyright DASSAULT SYSTEMES
Unfold the geometry on plane.5 by selecting the surface type ‘All’. Transfer the Parallel.1 on unfolded surface.
Jan 19, 2009 - Develop wires and points onto a revolution surface. Targeted ... Develop Wires: Concept Definition. 15 ..... options to position the result ...
Jan 19, 2009 - Water Bottle and its Support ................................................................................................................... 3. Step 1: Water Bottle Geometry: Curve ...
Academy of Graphic Arts and Book Design (HGB), was ... Latin Extended. 1 Jan Nave, Miss ... This specimen pdf is intended for evaluation purposes only.
works a flat sheet into a completely finished ... mensions to the flat sheet. To allow for slippage cut .... man or woman, to contact him in re- gard to preserving the ...
This software is intended to the children at the first and medium levels of the nursery school, as they are getting familiar with shapes, sizes and colors.
telecommunications and telematic infrastructures and services needs in European islands. The expected results are considered as a basic precondition to ...
Nov 23, 2006 - search for economies of scale and collective efficiency solutions in all ...... Historical, Empirical and Policy Dimensions, United Nations Industrial Development .... In the case of the LDCs, interviews with 2,500 firms were carried o
the airway pressure exceeds the high airway pressure alarm level for .... taneous breathing, and even when injection anesthesia .... Circulation 84: 35â. 39. 2.
Nov 23, 2006 - B. Technological development in LDCs in a comparative international ...... represents one of the very few options for LDC firms and suppliers to ...
Aug 9, 2005 - The stimulation was tightly coupled to the movement ... the vestibular nerve have shown that there is summa- ..... Neuroreport 13, 2379â2383.
For instance, from a physical point of view, the energy function used to compute .... can then be refined, for instance, using the effective Hamiltonian theory, as.
inter-stimulus interval (ISI) time of 0 , 16, or 26 msec and a 200 msec mask. Stimulus screens contained 3, 6, 12, 18 or 24 items of display, with each item ...
were to look at the target as a whole, and keep latency long enough to avoid ... that a representation of target shape guides saccades, rather than a more ...
Nov 23, 2015 - have, while those who come later must stay where they are for the sake of the saving the planet from the threat of climate change.â Far from ...
Science and Technology. Narvik University ... system for applications in enhanced environmental policies. ... of Microsystem and Information. Technology, Chinese Academy of. Sciences .... magneto resistive magnetometer sensor-based ACS.
expression in insulinomas developed in pancreatic b-cell specific Men1 mutant mice .... prepared and analysed by Western blotting as described previously [30].
are common in several developed countries. In fact I'd want my audience to know about the options and constraints there are in the choice to institute opposition ...
Nov 23, 2015 - Developed countries must do more than reduce emissions ... There is a difference between the emissions of developing countries which are ... have, while those who come later must stay where they are for the sake of the ...