Version 5 Release 19 January 2009 EDU_CAT_EN_DL1_FI_V5R19
Instructor Notes:
Copyright DASSAULT SYSTEMES
1
Developed Shapes
About this course Objectives of the course Upon completion of this course you will be able to: - Generate unfolded ruled surface - Develop wires and points onto a revolution surface
Targeted audience Surface Designers
Prerequisites
Copyright DASSAULT SYSTEMES
Students attending this course should have knowledge of CATIA V5 Fundamentals and Generative Shape Design
4 hrs
Instructor Notes:
Copyright DASSAULT SYSTEMES
2
Developed Shapes
Table of Contents (1/2) User Interface About User Interface
Unfolded Surfaces What is Unfolded Surfaces Tool Unfolded Surfaces: Concept Definition Unfolded Surfaces Functionalities What is Transfer Surfaces Tool
Develop Wires What is Develop Wires Tool Develop Wires: Concept Definition Develop Wires Functionalities
Ruled Developable Surfaces What is Ruled Developable Surfaces Tool Ruled Developable Surfaces: Concept Definition Ruled Developable Surfaces Functionalities
Copyright DASSAULT SYSTEMES
Master Exercise Design Intent: Water Bottle and its Support Design Process: Water Bottle and its Support
5 6
7 8 9 10 13
14 15 16 18
22 23 24 25
26 27 28
Instructor Notes:
Copyright DASSAULT SYSTEMES
3
Developed Shapes
Table of Contents (2/2) 29 30 31 32 33 34
Copyright DASSAULT SYSTEMES
Step 1: Curve Development Step 2: Creating Reinforcements Step 3: Insert a New Part Step 4: Create Three Holes and Unfold Step 5: Create an Opening Step 6: Unfold the Geometry
Instructor Notes:
Copyright DASSAULT SYSTEMES
4
Developed Shapes
User Interface
Copyright DASSAULT SYSTEMES
You will become familiar with the user interface of Developed Shapes tools.
Instructor Notes:
Copyright DASSAULT SYSTEMES
5
Developed Shapes
About User Interface Developed Shapes toolbar allows you to choose Develop Wires or Unfolded Surfaces functionalities. Unfolded Shapes permits to unfold a ruled surface.
To map any wireframe feature (point, line, curve) from a folded surface to an unfolded surface and vice-versa once the unfold computation has been performed and providing you have selected All as the surface type.
Copyright DASSAULT SYSTEMES
Develop Wires permits to develop wires onto a revolution surface with respect to the surface curvature.
Generate a ruled developable surface with the blend command. Enables the blend surface to start after and stop before the wire extremities.
Instructor Notes:
Copyright DASSAULT SYSTEMES
6
Developed Shapes
Unfolded Surfaces
Copyright DASSAULT SYSTEMES
You will become familiar with the unfolded surfaces concepts and functionalities.
Instructor Notes:
Copyright DASSAULT SYSTEMES
7
Developed Shapes
What is Unfolded Surfaces Tool This tool allows you to generate unfolded ruled surfaces. The surface you want to unfold must be ruled of degree 1*n. It means that this surface was created by sweeping a linear profile (of degree 1) along a guide of degree n.
Copyright DASSAULT SYSTEMES
Restrictions: Surfaces must have a null Gaussian curvature. The origin and the direction of the surface to unfold must not be on a tearing edge.
Instructor Notes:
Copyright DASSAULT SYSTEMES
8
Developed Shapes
Unfolded Surfaces: Concept Definition Ruled surface with a hole
Unfolded surface
Ruled surface with a hole Wireframe to be unfolded with the surface.
Copyright DASSAULT SYSTEMES
Curve to tear the surface
Unfolded surface with transferred element
Instructor Notes:
Copyright DASSAULT SYSTEMES
9
Developed Shapes
Unfolded Surfaces Functionalities (1/3) When you click on Unfold icon the following window appears: Choose the face you want to unfold
Select the reference origin and the direction to guide the unfolded surface Select the plane, origin and direction for the unfolded surface and direction
Copyright DASSAULT SYSTEMES
Select the surface type to be unfolded Click to display the unfolded surface. The Flattened Surface Length Distortion displays the maximum and minimum percentages of length distortion. A positive distortion means that the flattened surface is stretched, while a negative distortion means it is shrunk. Click to display the candidate curves or edges to tear in the 3D area
This button is only available with the ‘All’ surface type. It is grayed out at edition: to access it, you first need to modify an input and click Preview.
Instructor Notes:
Copyright DASSAULT SYSTEMES
10
Developed Shapes
Unfolded Surfaces Functionalities (2/3)
Choose the curves to tear the surface
Copyright DASSAULT SYSTEMES
Choose the wireframe to be folded or unfolded with the selected face
Instructor Notes:
Copyright DASSAULT SYSTEMES
11
Developed Shapes
Unfolded Surfaces Functionalities (3/3) Since R14 the Transfer tab allows to transform points and curves lying on the surfaces to unfold (Unfold). The transfer of elements is bi-directional once the unfolded surface is created (Fold).
Select the points or curves on the surface to unfold Copyright DASSAULT SYSTEMES
Type of transformation: Unfold: If you selected elements on the surface to unfold. Fold: If you created and selected wireframe elements on the surface t be unfolded. Warning: you cannot fold an element related associatively to the unfolded support.
Instructor Notes:
Copyright DASSAULT SYSTEMES
12
Developed Shapes
What is Transfer Surfaces Tool This tool allows to map any wireframe feature from a folded surface to an unfolded surface and vice-versa. If you select ‘Surface to unfold’, the ‘Unfolded surface’ automatically gets selected.
Copyright DASSAULT SYSTEMES
Restriction: The unfold computation must be performed by selecting ‘All’ as the surface type. The curves to transfer can be non-connex and multi-domain but cannot be non-manifold.
Instructor Notes:
Copyright DASSAULT SYSTEMES
13
Developed Shapes
Develop Wires
Copyright DASSAULT SYSTEMES
You will become familiar with the develop wires concepts and functionalities.
Instructor Notes:
Copyright DASSAULT SYSTEMES
14
Developed Shapes
What is Develop Wires Tool This tool allows you to develop wires and points onto a revolution surface. The wire can be any curve or sketch provided it hasn' t several edges crossing each one. For example, the wire can be an I, U, L shape but not a T, H or Y one for example. The example used to explain the develop wires principles is a wire on a cylinder that will be developed on a spherical surface. Develop-Develop function:
p' 1
p
2
2nd coordinate
1st coordinate
Copyright DASSAULT SYSTEMES
p' '
1 2
The first coordinate is converted in a curvilinear abscissa (p becomes p') The second coordinate is converted in a curvilinear abscissa (p'becomes p'')
The second coordinate is converted in a curvilinear abscissa (p becomes p').
2
The first coordinate is converted in a curvilinear abscissa (p'becomes p'').
Copyright DASSAULT SYSTEMES
1
Instructor Notes:
Copyright DASSAULT SYSTEMES
17
Developed Shapes
Develop Wires Functionalities (1/4) When you click on Develop icon the window above appears:
Choose your 2D profile you want to develop on a cylinder
Select the cylinder where the development will be done Choose the development method
Apply a radial deformation ratio on the result (Cf slide 16) Apply an angular deviation on the result (Cf. slide 16) Apply a ratio along y axis (Cf. slide 16)
Copyright DASSAULT SYSTEMES
Select to have more parameters options to position the result
Instructor Notes:
Copyright DASSAULT SYSTEMES
18
Developed Shapes
Develop Wires Functionalities (2/4)
Copyright DASSAULT SYSTEMES
Develop wire result
Instructor Notes:
Copyright DASSAULT SYSTEMES
19
Developed Shapes
Develop Wires Functionalities (3/4)
Copyright DASSAULT SYSTEMES
Original development
Radiantness
Inclination
Instructor Notes:
Copyright DASSAULT SYSTEMES
20
Developed Shapes
Develop Wires Functionalities (4/4)
Copyright DASSAULT SYSTEMES
Original development
Intermediate radius
Instructor Notes:
Copyright DASSAULT SYSTEMES
21
Developed Shapes
Ruled Developable Surfaces
Copyright DASSAULT SYSTEMES
You will become familiar with the Ruled Developable Surfaces concepts and functionalities.
Instructor Notes:
Copyright DASSAULT SYSTEMES
22
Developed Shapes
What is Ruled Developable Surfaces Tool It provides the user with the capability to force the blend operator to generate a ruled developable surface with the blend command. It enables the blend surface to start after and stop before the wire extremities in order to respect the constraint of developability. The resulting surface can then be directly processed in order to unfold it without distortion.
Copyright DASSAULT SYSTEMES
Restrictions: This new option of blend command is available only with DL1 product.
Instructor Notes:
Copyright DASSAULT SYSTEMES
23
Developed Shapes
Ruled Developable Surfaces: Concept Definition Surfaces for blend
Curves selection in blend command
Copyright DASSAULT SYSTEMES
Different results at the extremities.
Instructor Notes:
Copyright DASSAULT SYSTEMES
24
Developed Shapes
Ruled Developable Surfaces Functionalities When you click on Blend icon the following window appears: Select the curves to blend
Select the Developable tab
Check the button ‘Create a ruled developable surface’
Copyright DASSAULT SYSTEMES
Choose the options
Instructor Notes:
Copyright DASSAULT SYSTEMES
25
Developed Shapes
Master Exercise Water Bottle and its Support 45 min
Copyright DASSAULT SYSTEMES
In this exercise, you will practice the different "Develop Shapes" tools to build a water bottle and its support.
Instructor Notes:
Copyright DASSAULT SYSTEMES
26
Developed Shapes
Design Intent: Water Bottle and its Support
Copyright DASSAULT SYSTEMES
The water bottle and its support exercise contains 2 parts: Water bottle to test Develop wires Bottle support for Unfolded surfaces
Part used: Bottle_Support.CATDrawing Water_Bottle.CATDrawing
Instructor Notes:
Copyright DASSAULT SYSTEMES
27
Developed Shapes
Design Process: Water Bottle and its Support
1
2 Develop the curve on the bottle
Copyright DASSAULT SYSTEMES
5
4 Create the opening
6
Create the 3 holes and unfold the geometry
Create the reinforcements
3
Insert a new part in the product
Unfold the geometry
Instructor Notes:
Copyright DASSAULT SYSTEMES
28
Developed Shapes
Water Bottle and its Support Water Bottle Geometry (Step 1): Curve Development 5 min
Copyright DASSAULT SYSTEMES
In this step you will develop the pre-created sketch on the bottle surface.
Instructor Notes:
Copyright DASSAULT SYSTEMES
29
Developed Shapes
Water Bottle and its Support Water Bottle Geometry (Step 2): Creating Reinforcements 15 min
Copyright DASSAULT SYSTEMES
In this step, you will create the reinforcement using the development made in step 1 and GSD tools.
Instructor Notes:
Copyright DASSAULT SYSTEMES
30
Developed Shapes
Water Bottle and its Support Water Bottle Geometry (Step 3): Insert a New Part 5 min
Copyright DASSAULT SYSTEMES
In this step, you will use ASD functionalities to insert a new part in the assembly.
Instructor Notes:
Copyright DASSAULT SYSTEMES
31
Developed Shapes
Water Bottle and its Support Support Geometry (Step 4): Create Three Holes and Unfold 10 min
Copyright DASSAULT SYSTEMES
In this step, you will unfold a surface you modified.
Instructor Notes:
Copyright DASSAULT SYSTEMES
32
Developed Shapes
Water Bottle and its Support Support Geometry (Step 5): Create an Opening 5 min
Copyright DASSAULT SYSTEMES
In this step you will create an opening using GSD tools.
Instructor Notes:
Copyright DASSAULT SYSTEMES
33
Developed Shapes
Water Bottle and its Support Support Geometry (Step 6): Unfold the Geometry 5 min
Copyright DASSAULT SYSTEMES
In this step, you will unfold the final geometry.
Instructor Notes:
Copyright DASSAULT SYSTEMES
34
Developed Shapes
To Sum Up In this course you have seen: The develop wires concept and functionalities The unfolded surfaces concept and functionalities
CONGRATULATIONS !
Copyright DASSAULT SYSTEMES
You have completed the training on Developed Shapes functionality.
Jan 19, 2009 - Developed Shapes. CATIA V5 Training .... a New Part. 5 min. In this step, you will use ASD functionalities to insert a new part in the assembly.
Jan 19, 2009 - Develop wires and points onto a revolution surface. Targeted ... Develop Wires: Concept Definition. 15 ..... options to position the result ...
Jan 19, 2009 - Water Bottle and its Support ................................................................................................................... 3. Step 1: Water Bottle Geometry: Curve ...
Academy of Graphic Arts and Book Design (HGB), was ... Latin Extended. 1 Jan Nave, Miss ... This specimen pdf is intended for evaluation purposes only.
works a flat sheet into a completely finished ... mensions to the flat sheet. To allow for slippage cut .... man or woman, to contact him in re- gard to preserving the ...
This software is intended to the children at the first and medium levels of the nursery school, as they are getting familiar with shapes, sizes and colors.
telecommunications and telematic infrastructures and services needs in European islands. The expected results are considered as a basic precondition to ...
Nov 23, 2006 - search for economies of scale and collective efficiency solutions in all ...... Historical, Empirical and Policy Dimensions, United Nations Industrial Development .... In the case of the LDCs, interviews with 2,500 firms were carried o
the airway pressure exceeds the high airway pressure alarm level for .... taneous breathing, and even when injection anesthesia .... Circulation 84: 35â. 39. 2.
Nov 23, 2006 - B. Technological development in LDCs in a comparative international ...... represents one of the very few options for LDC firms and suppliers to ...
Aug 9, 2005 - The stimulation was tightly coupled to the movement ... the vestibular nerve have shown that there is summa- ..... Neuroreport 13, 2379â2383.
For instance, from a physical point of view, the energy function used to compute .... can then be refined, for instance, using the effective Hamiltonian theory, as.
inter-stimulus interval (ISI) time of 0 , 16, or 26 msec and a 200 msec mask. Stimulus screens contained 3, 6, 12, 18 or 24 items of display, with each item ...
were to look at the target as a whole, and keep latency long enough to avoid ... that a representation of target shape guides saccades, rather than a more ...
Nov 23, 2015 - have, while those who come later must stay where they are for the sake of the saving the planet from the threat of climate change.â Far from ...
Science and Technology. Narvik University ... system for applications in enhanced environmental policies. ... of Microsystem and Information. Technology, Chinese Academy of. Sciences .... magneto resistive magnetometer sensor-based ACS.
expression in insulinomas developed in pancreatic b-cell specific Men1 mutant mice .... prepared and analysed by Western blotting as described previously [30].
are common in several developed countries. In fact I'd want my audience to know about the options and constraints there are in the choice to institute opposition ...
Nov 23, 2015 - Developed countries must do more than reduce emissions ... There is a difference between the emissions of developing countries which are ... have, while those who come later must stay where they are for the sake of the ...
