... the lamp socket for Max Wattage information. Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box. 1.
Chandelier GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes.
This product may be dimmed with a standard incandescent dimmer.
CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
This instruction shows a typical installation.
Use minimum 90°c supply conductors.
This product is safety listed for dry locations only.
1A
LAMP
6 7
SHADE TOOL
COLLAR NUT SPACER
5 SHADE LONG STEM SOCKET TOP TIER
2 SHORT STEM
1
MIDDLE TIER
1
2
BOTTOM TIER
3
DECORATIVE WASHER
FINIAL STEM
4
FINIAL
1
Assemble the fixture by screwing the short stem to the middle tier, then screwing the top tier to the short stem.
2
Screw the long stem to the top tier.
3
Place the decorative washer onto the bottom of the bottom tier and secure it in place by screwing on the finial stem.
4
Install the finial by screwing it onto the finial stem (for cylindrical finial option, leave out the installation of the finial stem).
5
Place the shade and spacer over the socket, then secure them by tightening the collar nut onto the socket using the shade tool; repeat for remaining sockets.
6
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
7
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box. 1
ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne.
Utiliser les conducteurs d'alimentation supérieure à 90° c. 1A
6
AMPOULE
7
OUTIL D’ABAT-JOUR
ECROU À COLLIER ESPACEUR
5 ABAT-JOUR TIGE LONGUE DOUILLE NIVEAU SUPÉRIEUR
2 TIGE COURTE
1
2
NIVEAU INTERMÉDIAIRE
1
NIVEAU INFÉRIEUR
3
FLEURON
4
RONDELLE DÉCORATIF
TIGE DU FLEURON
1
Assembler le luminaire en vissant la tige courte au niveau intermédiaire, puis en la vissant à la niveau supérieur de la tige courte.
2
Visser la longue tige vers le niveau supérieur.
3
Placez la rondelle décoratif sur la base de le niveau inférieur et fixez-la en place sur la tige du fleuron.
4
Installer le fleuron en le vissant sur la tige courte (pour l'option cylindrique de fleuron, laisser de l'installation de la tige fleuron).
5
Placez l'abat-jour et l'espaceur sur la douille, puis fixez-les en serrant l'écrou à collier sur le douille avec l'outil d’abat-jour ; Répéter pour les douilles restants.
6
Vissez l'ampoules dans les douilles. Lire l'étiquette sur la douille de lampe pour informations Max Wattage.
7
Reportez-vous aux instructions pour supplément clos électrique et installation de luminaire sur boîte de sortie de maison.
2
PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan.
Utilizar conductores de suministro mínimo 90° c.
1A
6
BOMBILLA HERRAMIENTA DE LA PANTALLA
7
TUERCA DE COLLAR ESPACIADOR
5 PANTALLA TALL LARGO ENCHUFE NIVEL SUPERIOR
2 TALLO CORTO
1
2
NIVEL INTERMEDIO
1
NIVEL INFERIOR
3
ARANDELA DECORATIVA
4
FINIAL
TALLO DEL FINIAL
1
Monte la lámpara atornillar el tallo corto para el nivel intermedio, y luego atornillar el nivel superior al tallo corto.
2
Atornille el tallo largo al nivel superior.
3
Coloque la arandela decorativa en la parte inferior del nivel inferior y asegúrelo en su lugar atornillando en el tallo corto.
4
Instale el finial atornillándolo sobre el tallo del finial (para la opción de finial cilíndrico, dejar de lado la instalación de la tallo finial).
5
Coloque la pantalla y el espaciador sobre el enchufe, luego asegúrelos apretando la tuerca de collar en el enchufe con la herramienta de la pantalla; Repita para los enchufes restantes.
6
Enrosque la bombilla en el enchufe. Consulte la etiqueta en el enchufe de la lámpara para obtener información de Max Wattage.
7
Siga las instrucciones de Instalación incluido suplemento para eléctricos y instalación de la lámpara en la caja de enchufe de casa.
Connect the fixture to a suitable ground in accordance to local electrical codes. ... Neatly place all the wires into the junction box, place the canopy onto the ...
installation onto house outlet box. STEM. SEMI-FLUSH MOUNT ... This product may be dimmed with a standard incandescent dimmer. This instruction shows a ...
Installer un lien rapide sur la boucle de luminaire et la chaîne, puis un autre lien ... Tisser le cordon à travers la chaîne, la dais et hors de la boîte électrique.
instalacion aplicable por una persona que conozca la constussion y el funcionamiento del producto y los riesgos que supone. Conductores de alimentacion ...
Determine the height of the fixture with the provided stems and chain/loop, then assemble them by screwing them together. Insert the socket assembly through ...
código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan. Utilizar conductores de ...
DeWitt 4 Light Foyer Chandelier. 1.0. F3072-4. Chandelier. F3072/4. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed ...
Refer to the label on the lamp socket for Max Wattage information. Install and secure the string of beads by hooking them to the top and bottom of the fixture.
Installation Instructions for ... Feed the fixture wires through the stem assembly and screw the stem ... box, place the canopy onto the mounting plate, and secure it in place with the ... Refer to the label on the lamp socket for Max Wattage informa
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information. Optional: Use enclosed instructions for Swag Hook installation.
L. This product is suitable for dry locations only. This product may be dimmed with a standard incandescent dimmer. This instruction shows a typical installation.
Installer et fixer la chaîne de perles en les accrochant au haut et au bas de ... le bas de l'appareil et à la police, puis accrocher la basse chaîne de perles à la.
Ensure that the spun pan rests properly on top of the shade. Screw the ... with the construction and operation of the product .... A Generation Brands Company.
Install the bottom tier to the top tier by screwing the fixture arms to the swivels and bottom of the top tier. Assemble the top tier by screwing the fixture arms to the ...