CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Lesson 4: Surface Re-limitation and Connection
$Speech: Objectives of the lesson:
In this lesson you will learn how to limit the surfaces and form connection between the surfaces.
- Show tools available to delimit the surfaces (delimit means: extend the surfaces to a limit or reduce the size of the surfaces)
Lesson contents:
Copyright DASSAULT SYSTEMES
Case Study: Surface Re-limitation and Connection Design Intent Stages in the Process Re-limit the Surfaces Connect the Surfaces Smoothly Assemble the Surface
- Show tools available to connect smoothly 2 surfaces (fillet and blend surfaces) - Show how 2 distinct surfaces can be assembled, creating a single topology%
Duration: Approximately 4 Hours
Copyright DASSAULT SYSTEMES
1 4-1
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Case Study: Surface Relimitation and Connection
$Speech: The objectives of this case study you will practice at the end of the lesson will enable you to manipulate the tools seen in the lesson.%
Copyright DASSAULT SYSTEMES
The case study for this lesson is ‘Mobile Phone’. The focus of this case study is to use the relimitation and connection tools of Generative shape design workbench, and to dress up the model to achieve the final finished shape. You will be provided with the base surface. While you perform the operations, you will understand the different functionalities of the tools.
Student Notes:
Copyright DASSAULT SYSTEMES
4-2
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Design Intent
$Speech:
Copyright DASSAULT SYSTEMES
The design intent is to create the finished part using the base surface. The model should meet the following given design intents. Cerate a smooth blended edge at the top edge which varies with respect to thickness of the phone. • Use the Variable fillet to achieve the varying blend along the edge. Create a feature groove on the top face of the phone to beautify it or to make it look attractive. • Trim the tube surface lying on the face to get a groove feature. Create a display screen with the flange at inside to mount the display card. • Trim the top face of the phone at display location using the extruded surface, and keep the inner side of the surface which forms the flange. Create key pad holes on the top face of the phone to incorporate number keys. • Create the key pad profiles in a sketch and project them on the surface. Split the surface using projected curves. Create a smooth blended edge on the lower case of the phone. • Create a blend surface.
Copyright DASSAULT SYSTEMES
C
Discuss the Design Intent of the case study.
E
Tell the students to perform the case study, you will learn some concepts and tools and use them to perform the case study and other exercises%
A D B A.
Top-edge Variable blend
B.
Feature Grooves
C.
Display Screen
D.
Key Pad holes
E.
Bottom edge blend
4-3
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Stages in the Process The following steps are to be used to perform the case study: Access the Generative Shape Design workbench
2.
Scan the model for a better understanding of the modeling sequence.
3.
Create Geometrical Sets.
4.
Group the features.
$Speech: To be able to perform the case study successfully we will learn some tools of Generative shape design workbench%
Copyright DASSAULT SYSTEMES
1.
Student Notes:
Copyright DASSAULT SYSTEMES
4-4
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Step 1: Re-limit the Surfaces
$Speech: Objectives of the step:
In this section you will learn about different tools to re-limit surfaces.
Explain the tools that can reduce the size of a surface
Use the following steps : Relimit the Surfaces
2. 3.
Connect the Surfaces Smoothly Assemble the Surfaces
Copyright DASSAULT SYSTEMES
1.
Explain how a surface can be extended to fit to another surface%
Copyright DASSAULT SYSTEMES
4-5
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Why to Re-limit Surfaces Basic surface geometry, designed, consists of raw surfaces and construction elements. These wireframes and surfaces do not define the final shape.
Surfaces in raw stage
Operations such as Split and Trim help to convert these raw surfaces into finished geometry. While performing operations, keep in mind the following key points: A. Operations are used to produce the finished geometry shape.
Copyright DASSAULT SYSTEMES
B. Elements involved in an operation are kept in the history of the operation, but are hidden.
Copyright DASSAULT SYSTEMES
Operations are performed on these raw surfaces to get the finished surface
4-6
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Common Tools to Re-limit Surfaces and Curves
$Speech: Introduce these tools to the students
Modification of surface limits can be done in two ways: 1. By reducing the surface limits 2. By extending the surface limits Category
Name
Reduce surface limits
Split
Copyright DASSAULT SYSTEMES
Trim
Extend surface limits
Extrapolate
Copyright DASSAULT SYSTEMES
Icon
Description Splits one surface with other surface. Only one surface gets affected.
Trims surfaces involved in the operation with respect to one another.
Illustration
In Split illustration: The disc is to be split using the cylinder. Observe that in split operation only “The element to be split” gets affected while the splitting or cutting element remains as it is. In trim illustration: Both the Disc and Cylinder are getting trimmed with respect to each other. Extrapolate: extending operation%
Extends surface boundaries with desired continuity.
4-7
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Split Use the Split tool to remove unwanted portions of wireframe and surface elements.
Element to be cut
A
You can split : A. B.
Wireframe elements. Wireframe elements can be split by points, other wireframe elements, or surfaces Surfaces. Surfaces can be split by wireframe elements or other surfaces.
Copyright DASSAULT SYSTEMES
Cutting elements
Copyright DASSAULT SYSTEMES
Cutting elements
B
Element to be cut
4-8
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Splitting Elements (1/2) Use the following steps to split an element: 1. Select the Split icon. 2. Select the element to cut. 3. If necessary: a. Select additional elements to cut by selecting the bag icon. b. Select the additional elements. c. Select ‘Close’ to close the Elements to cut dialog box. 4. Select the cutting element(s). 5. If necessary, select additional cutting elements. (Note: we have not selected this additional cutting element.)
2
3a 4
3c
3b Copyright DASSAULT SYSTEMES
1
4
5
Copyright DASSAULT SYSTEMES
4-9
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Splitting Elements (2/2) Use the following steps to split an element: 6. 7. 8.
Click on preview If you are not satisfied with the side which is cut, click on Other side to cut another side of the element. Click OK to complete splitting of a surface.
7
Copyright DASSAULT SYSTEMES
8
Copyright DASSAULT SYSTEMES
6
Note: The cutting element is hidden
4-10
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Trim The Trim tool is used to trim two intersecting elements and keep only a part of those elements. You can trim: A. B.
A
Two wireframe elements Two surfaces
Copyright DASSAULT SYSTEMES
B
Copyright DASSAULT SYSTEMES
4-11
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Trimming Elements Use the following steps to trim elements: 1. 2.
3.
4.
Select the Trim icon. Select the elements to be trimmed. Select the element on the part which you want to retain. If required, change the side to be kept by selecting the ‘Other side’ of element buttons. Click OK to perform the trim operation. The trimmed element is added to the specification tree.
1 2 B A
Copyright DASSAULT SYSTEMES
C
Copyright DASSAULT SYSTEMES
3
4
4-12
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Difference Between a Split and a Trim Splitting geometry is breaking all the geometries at the intersection with the cutting element and then removing the unwanted portion. During splitting operation cutting element does not get affected. Element to Split
Select the Side to keep
Result of Split operation
Cutting Element
Trimming geometry is cutting all the geometries with respect to one another to get the desired shape during trimming operation.
Copyright DASSAULT SYSTEMES
Element to be Trimmed
Select the Side to keep
Result of Trim operation
Select the Side to keep Show the split and trim (L4.CATPart/SPLIT_TRIM)
Copyright DASSAULT SYSTEMES
4-13
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
= gt h le n Ex tr ap ol at ed
The Extrapolate tool is used to extend a surface or a curve. It is often used to extend an element past another so that later these elements can be trimmed, split, or intersected together.
65
m
m
Why We Need to Extrapolate Elements
You can extrapolate : A. B.
Any type of curve or line Any type of surface.
L= 25 m m
Extrapolation can be limited by: A. B.
Giving a length Limiting upto an element (Curve or Surface)
Copyright DASSAULT SYSTEMES
You can obtain the result: A. B.
Extrapolate upto surface
Extrapolated element as a separate element Extrapolated element assembled with the parent entity Show the extrapolation (L4.CATPart/EXTRAPOLATE)
Copyright DASSAULT SYSTEMES
4-14
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Extrapolating Elements (1/2) Use the following steps to extrapolate an element: 1. 2.
3.
Copyright DASSAULT SYSTEMES
4.
Select the Extrapolate icon. For a surface, select the edge representing the boundary to be extrapolated. For a curve, select the end point of the curve. Select the surface or curve to be extrapolated. Enter the length value. A preview of the extrapolated surface is shown.
Copyright DASSAULT SYSTEMES
1 2 3 4
3
Extrapolated Surface
2
4-15
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Extrapolating Elements (2/2) You will now learn to set propagation mode and continuity type (continued…): 5.
Select the Propagation mode a. None (Default mode) b. Tangent continuity c. Point continuity
5a
5b
5c
Change the continuity type to curvature
Copyright DASSAULT SYSTEMES
6.
6
Copyright DASSAULT SYSTEMES
6
4-16
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4A
Student Notes:
Recap Exercise 20 min
In this exercise you will practice Splitting and Trimming operations. You will understand the difference between Trimming and Splitting by performing different instances of operations provided in the different geometrical sets. Detailed instructions for this exercise are provided.
Copyright DASSAULT SYSTEMES
By the end of this exercise you will be able to understand the difference between Split and Trim operations.
Copyright DASSAULT SYSTEMES
4-17
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4A (1/2) Open the part. Open an existing part file. The file consists of Surfaces and wireframes in different geometrical sets. a. Browse and open part: Exercise_4A_Start.CATPart
2.
Split two surfaces using a third surface. a. Keep one side of the blue surface. b. Keep both side of the Green surface.
Copyright DASSAULT SYSTEMES
1.
Copyright DASSAULT SYSTEMES
Student Notes:
End Result
4-18
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4A (2/2) Split a curve using the following cutting elements. a. Blue curve with Cyan curve b. Green curve with Pink point c. Brown curve with Plane d. Pink curve with surface
4.
Trim the given three surfaces in one operation. 1. Select Green and Blue surface 2. Use Other side option to get correct side 3. Select Brown surface. Use the Other side option to get the required side
Copyright DASSAULT SYSTEMES
3.
Student Notes:
Copyright DASSAULT SYSTEMES
4-19
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4A: Recap
Student Notes:
Copyright DASSAULT SYSTEMES
Split and Trim operations on surfaces and wireframe elements.
Copyright DASSAULT SYSTEMES
4-20
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4B
Student Notes:
Recap Exercise 20 min
In this exercise, you will perform Trim and Split operations on a computer mouse model. You will perform these Split and Trim operations on the same set of surfaces to understand the differences in the operation. High-level instructions for this exercise are provided.
Copyright DASSAULT SYSTEMES
By the end of this exercise you will be able to understand the difference between Split and Trim operations.
Copyright DASSAULT SYSTEMES
4-21
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4B Open the part. Open an existing part file. The file consists of surfaces of the model of the mouse. Browse and open the part: Exercise_4B_Start.CATPart
2.
Split the intersecting surfaces to get the finished shape. Split the Green and Blue surfaces one by one. Join the resulting surface Split between Pink and Joint surface.
3.
Perform Trim operation on the same set of parent surfaces. Trim between Green and Blue surfaces. The resultant surface would be a single entity.( Unhide the parent surfaces). Split the resulting surface with the Pink surface to get the final model.
Copyright DASSAULT SYSTEMES
1.
Student Notes:
Copyright DASSAULT SYSTEMES
4-22
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4B: Recap
Student Notes:
Copyright DASSAULT SYSTEMES
Split and Trim operations on surfaces and wireframe elements.
Copyright DASSAULT SYSTEMES
4-23
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Step 2: Connect the Surfaces Smoothly
Student Notes:
$Speech: Objectives of the step:
In this section you will learn about different methods to connect surfaces smoothly.
- See two methods to connect surfaces: fillet (radius) and blends (tension)
Use the following steps: Relimit the Surfaces
2.
Connect the Surfaces Smoothly
3.
Assemble the Surfaces
Copyright DASSAULT SYSTEMES
1.
- Give you the keys to choose between these 2 methods%
Copyright DASSAULT SYSTEMES
4-24
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Why we need to Connect Surfaces Smoothly? A.
Surfaces are closely related to the aesthetics of the product. The reflection of light from the surface should show a smooth variation. If a surface does not own certain described characteristics, visual appearance of the product will get affected.
B.
The surfaces should not only be smooth, but also be machinable. Surfaces may have small gaps, ridges which may not be noticeable on the computer screen. If the cutting tool catches on a small ridge or even the tiniest discontinuity, then it can tear a hole in the part which is being machined. When the machine tool tries to drop its cutter into the gap, it gouges a hole.
A
Copyright DASSAULT SYSTEMES
B
Copyright DASSAULT SYSTEMES
4-25
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
How to Connect Two Surfaces Smoothly? You can connect two existing surfaces smoothly using various types of ‘Blends’. The transition of these ‘Blends’, from one surface to another, is smooth as if this blend flows from one surface into another. These blends are of the following types: A. B.
$Speech:
A
B
Radius Driven Blends - Fillets Tension Driven Blends - Blend
Copyright DASSAULT SYSTEMES
Radius Driven Blends
Copyright DASSAULT SYSTEMES
Radius
Tension Driven Blends
Free Shape
Two ways of connecting surfaces: you can connect surfaces using fillets and in this case, the shape of the connecting surface is driven by a radius. Concretely, a fillet is calculated as if a ball was rolling between two intersecting surfaces (Draw on the board if necessary). Why ? AS we have seen before, a tool can be considered as a sphere. SO, connecting surfaces by rolling a ball on the edges ensures that the part will be “machinable”. NOTE: even if we’re talking here of connection between surfaces, fillets can also be used to remove sharp edges on already connected surfaces When you connect 2 surfaces using the blend tool, the connection shape is driven by tensions. The shape is4-26 no circular, its evolution is more free.%
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Various Types of Fillets The following table lists the different types of fillets in GSD workbench
Copyright DASSAULT SYSTEMES
Fillet
Description
Icon
Shape Fillet
The Shape Fillet tool creates a smooth connection surface between two separated surfaces
Edge Fillet
The Edge Fillet tool creates a transitional surface along a sharp edge of a surface
Variable Fillet
The Variable Radius Fillet tool creates a fillet on a selected edge whose radius varies at a selected point.
Chordal Fillet
The Chordal Fillet tool creates a fillet on selected edges taking the chord length as the input.
Face-Face Fillet
The Face-Face fillet is used when there is no intersection between the selected faces or when there are more than two sharp edges between the faces.
Tritangent Fillet
A TriTangent fillet creates a transitional surface by removing one of the three selected surfaces. The fillet surface is created tangent to the three selected faces.
Illustration
Show the fillet and blend (L4.CATPart/FILLETS and BLENDS)
Copyright DASSAULT SYSTEMES
4-27
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Creating a Shape Fillet 1
Shape fillets are used to create a fillet between two surfaces. You have a choice to select the direction in which the fillet should appear. Use the following steps to create a Bi-Tangent shape fillet: 1. 2. 3. 4. 5. 6. 7.
Select the Fillet icon. Select the two surfaces/faces. Enter the radius value. Ensure that the red arrows point towards the concave side of the fillet. If not, select on the arrow to change its direction. Specify the Extremities conditions. Clear the Trim Support options if you do not want to have the supporting elements assembled into the fillet feature. Click OK to create the shape fillet.
6
3 5
Copyright DASSAULT SYSTEMES
2
Copyright DASSAULT SYSTEMES
7 2
4
4-28
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Shape Fillet Extremities Management Creating fillets using surfaces gives greater control to the resulting element. For example, the connection between the fillet and the support surface(s) can be customized to create the desired geometry.
A
B
There are four options to control the extremities of a fillet: The Smooth fillet The Straight fillet The Maximum fillet The Minimum fillet
C
D
Copyright DASSAULT SYSTEMES
A. B. C. D.
Copyright DASSAULT SYSTEMES
4-29
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Creating an Edge Fillet Edge fillets are used to create a fillet on the sharp edge of a surface.
1
2
Use the following steps to create an edge fillet: 1. 2. 3. 4.
5.
Select the Fillet icon. Select the sharp edges to smooth. Enter the radius value. Choose the propagation mode: • Tangency • Minimal • Intersection edges Validate by clicking OK.
3
Copyright DASSAULT SYSTEMES
4
Copyright DASSAULT SYSTEMES
5
4-30
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Edge Fillet: Blending Vertex (1/2)
Student Notes:
When the initial geometry with sequence of fillets is modified, the sequence of fillets may fail and the designer may have to have a new fillet sequence: Edges to fillet
Copyright DASSAULT SYSTEMES
If the initial geometry is modified, the fillet sequence cannot be recalculated:
The Blend Vertex allows you to make fillets that are more stable during the modifications.
Copyright DASSAULT SYSTEMES
4-31
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Edge Fillet: Blending Vertex (2/2) 1. 2. 3. 4. 5.
Select the Fillet icon. Select the edges on which you want to make fillets. Click on the “More” button to expand the fillet dialog box: Click on the “Blend Corner” button: Specify the setback distances and confirm the fillet creation by clicking OK.
1
4
3
Copyright DASSAULT SYSTEMES
5
Copyright DASSAULT SYSTEMES
4-32
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Edge Fillet : Keeping Edges
Student Notes:
In some case, you may need to indicate that an edge should not be filleted, if a radius is too large for instance.
Copyright DASSAULT SYSTEMES
Click on the more button to expand the dialog box, then select the edge you want to retain.
Copyright DASSAULT SYSTEMES
4-33
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Creating a Chordal Fillet Chordal fillets are used to control the width of the fillet from end to end, especially when the fillet is performed after the Variable Draft operation.
2
1
Use the following steps to create a Chordal fillet: 1. 2. 3. 4.
Select the Chordal Fillet icon. Select the edges to be filleted. Specify the Chord length (If required you can specify variable chord length). Click OK. The Chordal fillet is generated.
3
Copyright DASSAULT SYSTEMES
2
Copyright DASSAULT SYSTEMES
4
4-34
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Creating a Blend (1/3) Blend is a surface that is created between two support surfaces forming a smooth transition between them. You can create a blend of point, tangency and curvature continuity. Further you can control the shape of the surface by applying different tension values. Use the following steps to create a blended surface: 1. 2. 3. 4. 5.
2 3
1
4
Select the Blend icon. Select First curve and support. Select Second curve and support. Select the type of continuity you want between surfaces. Here Tangency is selected. Click OK to create the blend
5
Copyright DASSAULT SYSTEMES
1st Curve
Copyright DASSAULT SYSTEMES
1st Support
2nd Support
2nd Curve
4-35
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Creating a Blend (2/3) Now you will learn how to change the continuity type of the blend. 6.
7.
If the supports are specified, define the type of continuity (Point, Tangency, Curvature) for each side. If required, select the Trim Support options. When selected, the support surfaces are trimmed and are assembled into the blended surface.
Connected with Point Continuity
Connected with Tangent Continuity
6
Copyright DASSAULT SYSTEMES
7
Copyright DASSAULT SYSTEMES
Connected with Curvature Continuity
4-36
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Creating a Blend (3/3) Use the following steps to change the tension values in the blend to modify its shape 8.
9.
Specify tension at the blend surface limits. Tension can be specified as: a. Default b. Constant c. Linear d. S type Click OK to generate the blend surface.
Default tension
Constant tension of 2.5
Copyright DASSAULT SYSTEMES
8
Copyright DASSAULT SYSTEMES
Linear tension from 1 to 2.5
4-37
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Criteria for Selecting Blends and Fillets There are several types of blends and the choice depends on the functional requirements as well as on the desired aesthetic look of the part. Fillets are used for mechanically connecting surfaces with tangency continuity. Blends are used to create a surface of flexible shape controlled by tension. Thus blended surfaces are mainly used to give a good shape to the product. Surfaces Continuity
Manufacturing requirements
Curvature (G2)
Copyright DASSAULT SYSTEMES
Tangency (G1)
Blend
Fillet
No Continuity Compare the junction with fillets and the connection with blends (L4.CATPart/BLEND vs FILLET)
Copyright DASSAULT SYSTEMES
Visual requirements Point Continuity
Curvature Evolution
4-38
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Step 3: Assemble the Surfaces
$Speech: Objectives of the step:
In this section you will learn how to assemble various surfaces.
Explain the tools available to assemble surfaces (or curves)%
Use the following steps: Relimit the Surfaces Connect the Surfaces Smoothly
3.
Assemble the Surfaces
Copyright DASSAULT SYSTEMES
1. 2.
Copyright DASSAULT SYSTEMES
4-39
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Why to Join Elements? Join operation is used when you want to concatenate or logically group adjacent surfaces/wireframes into a single element that can be used for future operations. It is a mechanical assembly of curves or surfaces which forms a single entity in the tree. Advantages: 1.
There is only one feature to be selected in the Tree.
2.
Some CATIA tools require only one element as input, in such cases Join can be selected. Bottle Top
1
Copyright DASSAULT SYSTEMES
2 3
Show the join (L4.CATPart/JOIN)
Copyright DASSAULT SYSTEMES
Bottle Body
Bottle Bottom
4-40
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Joining Elements Use the following steps to join elements: 1. 2. 3.
Select the Join icon. Select the elements to be joined. Click OK to complete the operation.
1
2
3
Copyright DASSAULT SYSTEMES
2a
Copyright DASSAULT SYSTEMES
2b 2c
4-41
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Joining Elements – Exclude Sub-Elements While joining the elements, you can exclude some sub-elements from the joined surface. Use the following steps to exclude sub-elements: 1. 2. 3. 4.
Select the elements to be joined or edit the existing Join operation. Select the elements you want to exclude from the joined surface through the Sub-Elements To Remove tab. Click Preview to create the join If you want to create a separate join of the excluded elements, select Create join with sub-elements option. Observe that one more join node is added in the tree
2 2
4
Copyright DASSAULT SYSTEMES
3
2 4
Copyright DASSAULT SYSTEMES
4-42
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Checks While Joining Elements Together (1/3) You will learn about various options in Join that enable you to confirm whether the surfaces under consideration are connected as desired. A.
Check Connexity: When this option is selected, the Join operation will be performed only if the elements to be joined are connected or when the gap between the surfaces is within permissible limits. Surfaces cannot be joined when : Illustration
Error Description
Solution
Non-Connex Result counts two domains: When the surfaces to be joined intersect each other (which results in the formation of separate domains)
Copyright DASSAULT SYSTEMES
Split the surfaces with each other Non-Connex Result counts two domains: When the gap between the surfaces is more than the Merging Distance (permissible value). Here a gap of 0.07 mm already exists between the surfaces.
Copyright DASSAULT SYSTEMES
Remove the Gap or enter Merging distance value greater than 0.07mm
4-43
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Checks While Joining Elements Together (2/3) B.
Check Tangency: When this option is checked, the Join operation will be performed only if the elements to be joined are continuous in tangency or when the discontinuity is below defined threshold value. Illustration
Error Description
Solution
Copyright DASSAULT SYSTEMES
Modify the geometry by making it tangent or set the Angular Threshold value greater than 0.7 degrees.
Copyright DASSAULT SYSTEMES
An Error message is prompted when the surfaces to be joined are discontinuous in tangency. Here a tangency discontinuity of 0.7 deg exists between these surfaces.
4-44
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Checks While Joining Elements Together (3/3) C.
Check Manifold: This option is active only for curves. This option when checked, forbids creation of non manifold configurations. A wireframe element is called “manifold” when at least one of its vertex points join at least 3 edges. 1 Vertex point
3 Edges
D.
Simplify the Result: This option reduces the number of cells in the resulting elements.
Copyright DASSAULT SYSTEMES
1
Copyright DASSAULT SYSTEMES
1
2
2
4-45
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Why Federate the Join? (1/2)
Student Notes:
A- Surfaces are made of several faces. Elements created from a surface are in fact created from its faces.
The pad has been created with the option “Up to surface”, using the blue surface. A fillet have been added to the top edge of this pad. This edge depends on the face of the blue surface.
Copyright DASSAULT SYSTEMES
B- A modification of the part geometry may lead to a change in the supporting face.
The sketch supporting the pad has been modified so that the filleted edge does not lie anymore on the same face
Copyright DASSAULT SYSTEMES
4-46
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Why Federate the Join? (2/2)
Student Notes:
C- This change can lead to an update error because the elements created from these faces are no longer recognized.
During the update of the part, an update error occurred: The filleted edge is not recognized.
Copyright DASSAULT SYSTEMES
D- Federating the faces of the surfaces, this kind of update error does not occur anymore.
To solve the problem, you have to federate the faces of the blue surface. Then the part is updated without any problem.
Copyright DASSAULT SYSTEMES
4-47
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Assemble Result - Geometry Creation Tools (1/2) The following table sums up the tools which give assembled output in the specification tree Tool
Description By activating ‘Trim elements’ option, curves get assembled and form a single entity in tree. The parent curves go into the hide mode.
Option
Illustration 1
2
3
Option ‘OFF’
By activating ‘Trim elements’ option, curves get assembled and form a single entity in tree. The parent curves go into the hide mode.
1
1
Option ‘ON’
1 3 2
Option ‘OFF’
Option ‘ON’
Copyright DASSAULT SYSTEMES
When you Trim elements together, by default, the result will always be a single feature in the tree.
Copyright DASSAULT SYSTEMES
4-48
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Assemble Result - Geometry Creation Tools (2/2) The following table sums up the tools which give assembled output in the specification tree Tool
Description
Option
Illustration
By activating the ‘Trim Supports’ option, the surfaces and fillet form a single entity in the tree and the parent surfaces go into the hide mode
By checking the ‘Trim Supports’ option, the blend surface is relimited upto the curves. A single feature is created in the tree.
Copyright DASSAULT SYSTEMES
Option ‘OFF’
When ‘Assemble result’ option is checked, the Extrapol result gets assembled with the parent feature and forms a single feature in the tree.
Copyright DASSAULT SYSTEMES
Option ‘OFF’
Option ‘ON’
Option ‘ON’
4-49
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
To Sum Up
Student Notes:
Copyright DASSAULT SYSTEMES
In the following slides you will find a summary of the topics covered in this lesson.
Copyright DASSAULT SYSTEMES
4-50
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Re-limit the Surfaces Operations such as Split and Trim help to convert raw surfaces and construction elements into finished geometry. Elements involved in an operation are kept in the history, but are hidden. The image shows the difference between Split and Trim. Splitting is breaking all the geometries at the intersection with the cutting element and then removing the unwanted portion. During splitting, cutting element does not get affected.
Element to Split
Select the Side to keep
Result of Split operation
Cutting Element Element to be Trimmed Select the Side to keep
Result of Trim operation
Trimming is cutting all the geometries with respect to one another to get the required shape.
Connect the Surfaces Smoothly You can connect two existing surfaces smoothly using following ways:
Copyright DASSAULT SYSTEMES
Radius Driven connections - Fillets Tension Driven connections - Blend
Select the Side to keep
Radius Driven Blends
Tension Driven Blends
The choice of the blend depends upon the functional requirement and aesthetics of the part. Fillets are used for mechanically connecting surfaces with tangent continuity. Blend are used to create a curvature (G2) connection between the surfaces and obtain a more aesthetic result.
Copyright DASSAULT SYSTEMES
4-51
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Assemble the Surfaces Join operation is used to concatenate or logically group adjacent surfaces / wireframes into a single element that can be used for future operations. The merging distance is given by a threshold value (similar to smooth tool) this makes Join a tolerant modeling tool (allows the creation of non-continuous features that can be accepted in certain cases).
Bottle Top Bottle Body
Bottle Bottom
Copyright DASSAULT SYSTEMES
Similarly some other tools which offer the possibility to assemble features on the fly are Connect Curve, Corner, Trim, Fillet, Blend and Extrapolate.
Copyright DASSAULT SYSTEMES
4-52
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Main Tools Operations Toolbar 1
1
Split: Splits one surface with other surface. Only one surface gets affected.
2
Trim: Trims surfaces involved in the operation with respect to one another.
3
Extrapolate: Extends surface boundaries with required continuity.
4
Fillet: Mechanically connects surfaces with tangent continuity.
5
4
3
Join: Logically groups adjacent surfaces or wireframe.
Copyright DASSAULT SYSTEMES
5
2
Copyright DASSAULT SYSTEMES
4-53
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4C
Student Notes:
Recap Exercise 20 min
In this exercise, you will practice the tools of Generative Shape Design workbench such as Trim, Edge Fillet and Variable Fillet. You will be provided with the Die Surface of an automotive panel. You will use the advanced options of the fillet command to blend the sharp edges. Detailed instructions for this exercise are provided. By the end of this exercise you will be able to: Trim the surfaces as required. Blend the sharp edges using edge fillet.
Copyright DASSAULT SYSTEMES
Apply a variable fillet to the sharp edges.
Copyright DASSAULT SYSTEMES
4-54
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4C (1/5) 1.
Open the part. Open an existing part file. The file consists of datum surface of Draw Panel. a. Browse and open part: Exercise_4C_Start.CATPart
2. Insert a new Geometrical Set and name it as Operations. Create the Operation features in a new geometrical set.
Copyright DASSAULT SYSTEMES
3.
Trim the surfaces to attain the final shape of the panel. Trim between the Green and Purple surface. a. Select Trim Icon b. Select Purple surface c. Select Green surface d. Keep the surface side required e. Click OK to attain a final shape
Copyright DASSAULT SYSTEMES
3b
3a
3c
3d
4-55
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4C (2/5) 4. Fillet the top edge of the panel. Create an edge fillet. Use Blend Corner option to get a smooth blend at the Vertices. a. Select Edge Fillet Icon. b. Select the edges forming the vertex shown. c. Specify the radius [200mm]. d. Select Blend Corners button in to the more option. Four vertices are selected. e. Specify the Setback distance as [250mm]. f. Select Plane.1 as a limiting element for the fillet. g. Select OK to generate the fillet.
4c
4a
Fillet limited to Plane.1
4f 4b
The edges which form a corner have to be selected manually.
4d
Copyright DASSAULT SYSTEMES
4e
Copyright DASSAULT SYSTEMES
4g
4-56
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4C (3/5) 5.
Fillet the remaining edge of the panel. Create an edge fillet on the remaining edge of the panel. a. Select Edge Fillet Icon. b. Select the edges forming the vertex shown. c. Specify the radius [200mm]. d. Select Blend Corners button in to the more option. Two vertices are selected. e. Specify the Setback distance [400mm]. f. Select OK to generate the fillet.
5c
5a
5b Vertices to be blended
5d
Copyright DASSAULT SYSTEMES
5e
Copyright DASSAULT SYSTEMES
5f
4-57
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4C (4/5) 6.
Trim the surface length. Trim between the filleted surface and curved surfaces as shown. a. Select Trim Icon. b. Select the surfaces to be trimmed. c. Keep the surface side required. d. Select OK to Trim the surface.
6a
Copyright DASSAULT SYSTEMES
6b
6d
Copyright DASSAULT SYSTEMES
4-58
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4C (5/5) 7.
Create a Variable fillet at the trimmed edge. Create a Variable fillet on the remaining edge of the panel. a. Select Variable Fillet Icon. b. Select all the edges to be filleted. c. Specify the varying radius value on each edge( varying from 250 to 150mm). d. Select OK to generate the fillet.
7a
7b 250mm
200mm
Copyright DASSAULT SYSTEMES
7b
150mm 250mm
200mm
7d
Copyright DASSAULT SYSTEMES
4-59
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4C: Recap
Student Notes:
Trim the surfaces to your needs. Blend the sharp edges using an edge fillet.
Copyright DASSAULT SYSTEMES
Apply a variable fillet to the sharp edges.
Copyright DASSAULT SYSTEMES
4-60
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4D
Student Notes:
Recap Exercise 20 min
In this exercise you will practice the Surface Blend and Filleting tool. You will understand the difference between a blended surface and a fillet by analyzing the results. High-Level instructions for this exercise are provided. By the end of this exercise you will be able to: Create a blended surface between two existing surfaces. Create a shape fillet between two intersecting surfaces. Join two or more surfaces
Copyright DASSAULT SYSTEMES
Split the surfaces using a curve.
Copyright DASSAULT SYSTEMES
4-61
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4D (1/6) 1. Open the part. Open an existing part file. The file consists of extruded surfaces. a. Browse and open part: Exercise_4D_Start.CATPart
2
2. Create a Blend surface between two extruded surfaces. Create a blend using the two sketches.Use the extruded surfaces as support.
Copyright DASSAULT SYSTEMES
Sketches
Copyright DASSAULT SYSTEMES
Extruded Surfaces
4-62
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4D (2/6) 3. Create a boundary. Create a boundary of Extrude.1 surface.
3
4. Fill the boundary. Select the Planar Boundary Only check box to fill the boundary.
Copyright DASSAULT SYSTEMES
4
Copyright DASSAULT SYSTEMES
Fill Boundary
4-63
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4D (3/6) 5.
Join surfaces. Join blended surface and the extruded surfaces.
5
6 Create a Shape Fillet. Create a fillet between joint surface and the filled surface.
Copyright DASSAULT SYSTEMES
6.
Copyright DASSAULT SYSTEMES
4-64
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4D (4/6) 7
7. Create Parallel curves. Hide this fillet and unhide the join and fill surface from the specification tree. Create parallel curves on join and fill surface using a boundary curve (You will be reusing these surfaces to create Blend).
8. Split the surfaces. Split the fill and join surface using respective parallel curves.
Copyright DASSAULT SYSTEMES
8
Copyright DASSAULT SYSTEMES
4-65
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4D (5/6)
Copyright DASSAULT SYSTEMES
9. Create a blend surface between two split surfaces. Create a blend between two split surfaces.
9
10. Create two join surfaces. Join all the surfaces which include filleted surface (but not the blend surface created in step 9). Join all the surfaces which include blend surface (but not the filleted surface created in step 6). Intersect the two joins created with ZX plane. (This intersection curve will be used for Porcupine analysis in the next step).
Copyright DASSAULT SYSTEMES
4-66
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Exercise 4D (6/6) 10. Porcupine analysis results of filleted surface and blend surface. Filleted surface a. b. c.
Surface produced by Fillet tool is tangent continuous surface. The shape of the fillet is invariable. It is a radius driven shape.
Blend surface. a.
Copyright DASSAULT SYSTEMES
b. c.
Surface produced by Blend tool can be Point, Tangent or Curvature continuous surface. The shape of the surface is variable. It is a tension driven shape.
Filleted surface with tangent continuity
Copyright DASSAULT SYSTEMES
Blended surface with Curvature continuity
4-67
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Exercise 4D: Recap
Student Notes:
Create a blend surface between two existing surfaces. Create a shape fillet between two intersecting surfaces. Join two or more surfaces
Copyright DASSAULT SYSTEMES
Split surfaces using a curve.
Copyright DASSAULT SYSTEMES
4-68
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Case Study: Surface Re-limitation and Connection
Student Notes:
Recap Exercise 30 min
In this exercise you will practice how to use the surface Re-limitation and Connection tools.
Copyright DASSAULT SYSTEMES
Create a smooth blended edge at the top, this edge varies with respect to thickness of the phone. Create a feature groove on the top face of the phone to add aesthetics. Create a display screen with a flange on the inside to mount the display card. Create key pad holes on the upper part of the phone for number keys. Create a smooth blended edge on the lower case of the phone.
Using the techniques you have learned in this lesson, and with tips from the previous exercises, create the model without detailed instruction.
Copyright DASSAULT SYSTEMES
4-69
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection Student Notes:
Do It Yourself: Surface Re-limitation and Connection (1/4) 1.
Open the given part consisting of base surfaces of mobile phone model in the Generative Shape Design Workbench. a. Browse through the files and open the model Case_Study_Start.Catpart b. Study the part.
1
2 2.
Trim between the top and the side surfaces a. Trim between the Pink and Blue surfaces. 4.0mm
3
Copyright DASSAULT SYSTEMES
3.
Create a smooth blended edge at the top with respect to thickness of the phone. a. Create a Variable Fillet along the top edge as shown. b. The radius of the fillet should vary from 0.5mm to 4.0mm.
Copyright DASSAULT SYSTEMES
0.5mm
4-70
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Do It Yourself: Surface Re-limitation and Connection (2/4) 4
Copyright DASSAULT SYSTEMES
4. Create a feature groove on the top face of the phone to add aesthetics. a. Trim the sweep surface from the top face as shown. b. Keep the surface to form a groove on the main body. c. Create the groove at both the locations specified.
Student Notes:
Copyright DASSAULT SYSTEMES
4-71
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Do It Yourself: Surface Re-limitation and Connection (3/4) 5.
Student Notes:
Create a display screen with a flange inside. a. Create a trim between the main surface and the extruded surface as shown. b. Keep the inner portion of the extruded surface to create a flange like feature.
5 6.
Create a key pad holes on the upper part of the phone for number keys. a. Project the sketch consisting of key profiles on the main surface. Each profile in a sketch is an output feature. b. Split the main surface with a projected curve as shown.
Copyright DASSAULT SYSTEMES
6
Copyright DASSAULT SYSTEMES
4-72
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Do It Yourself: Surface Re-limitation and Connection (4/4) 7.
8.
Intersection Curve Parallel Curves
7
Copyright DASSAULT SYSTEMES
9.
Create a smooth blended edge on the lower case of the phone. a. Create two parallel curves. Create one on the brown surface and another on the green surface at 3mm distance from intersection curve, as shown. b. Split the surfaces with the parallel curve lying on them. c. Create a blend surface between two parallel curves. Join the surfaces of lower case and upper case separately. Fill the display screen and apply transparency to the surface.
Student Notes:
Copyright DASSAULT SYSTEMES
4-73
CATIA V5 Surface Design- Lesson 4: Surface Re-limitation and Connection
Case Study: Surface Re-limitation and Connection Recap
Student Notes:
Copyright DASSAULT SYSTEMES
Create a smooth blended edge at the top, the edge varies with respect to thickness of the phone. Create a feature groove on the top face of the phone to add aesthetics. Create a display screen with a flange on the inside to mount the display card. Create key pad holes on the upper part of the phone for number keys. Create a smooth blended edge on the lower case of the phone.
Copyright DASSAULT SYSTEMES
4-74