PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE ... ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.

INVOLVED CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR. Products with electronic ballasts must not be ...

Issue: 1 28.07.2015. SEMI FLUSH. 7768 / SKU 1362008. P.01 /02. LIRE ATTENTIVEMENT LES INSTRUCTIONS AVANT DE COMMENCER LE MONTAGE.

Issue: 1 28.07.2015. SEMI FLUSH. 7766 / SKU 1362006. P.01 /02. LIRE ATTENTIVEMENT LES INSTRUCTIONS AVANT DE COMMENCER LE MONTAGE.

Connect the fixture to a suitable ground in accordance with local electrical codes. Connect the white fixture wire to the neutral power line wire with a wire nut.

Place the shade, shade ring, diffuser, and washer (in that order) onto the threaded pipe and secure it in place with the hex nut (Do not over tighten). Place the ...

Marquer les emplacements des trous d'ancre sur la plaque de montage et ... Connectez le fil blanc de luminaire au fil de la ligne d'alimentation neutre avec un ...

1A. 3. CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards ... Connecter le fil noir du luminaire (rond et

Refer to the label on the lamp socket for Max Wattage information. Place the shade onto the threaded pipe and secure it in place with the washer and hex nut ...

Place the rubber washer, the shade, and large washer onto the threaded pipe (in that order), then secure them in place using a hex nut. Place the decorative cup ...

Lennon 3 Light Semi-Flush Mount. 1.0. SF339. SF339. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed utilizing compliant.

Lennon 5 Light Semi-Flush Mount. 1.0. SF340. SF340. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be installed utilizing compliant.

junction boxes. This product is safety listed for damp locations. This product may be dimmed with a standard incandescent dimmer. This instruction shows a ...

Installation Instructions for. Hamlet 2 Light Semi-Flush Mount. 1.0. SF325. SF325. G. P. I. : ENERAL RODUCT NFORMATION. These fixtures are intended to be ...

Placez la coupe sur le tuyau fileté et fixez-le en place en vissant le fleuron sur le tuyau fileté. 4. 5. AMPOULE. ATTENTION RISQUE INCENDIE. : D'. Ce produit ...

Conecte el cable blanco de la lámpara al cable de línea de energía neutra con una tuerca para cable. Conecte el cable negro de la lámpara al cable de línea ...

Thicker. Plexiglas would help, but is heavy. Before adding insulation to the cabin interior, I turned to my friend, Colin. Powers of Independence, OR. Colin has the ...

product's tender of delivery for a period of ϯ year for residential use. This Limited ... at 757.563.9273, or e-mail at [email protected]. .... La garantie limitée de KETTLER®s'applique aux produits vendus par le réseau d'agents agréés à l'

INSTALLATION OF STI-1215 STOPPER® DOME FOR HORN/SPEAKER/STROBE FLUSH ... Test appliance according to appliance manufacturer's instructions.

Superficie du bâtiment pi.ca. / Building area sq.ft. 5,051. Superficie commerciale pi.ca. / Commercial area sq.ft. 3,360. Espace résidentiel / Residential space.

F 455, F 457, F 458. M. M. M. CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar ...

Coloque las tiras adhesivas dentro del marco de los parlantes. Inserte la rejilla de .... necesitará tener acceso al interior de los parlantes durante la instalación.

CAUTION - RISK OF FIRE. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Use minimum 90°c supply conductors. 4. 1. 1.

California Proposition 65: ... California SCAQMD Rule 443.1 (VOC's): 0% ..... ebullición, refresque el envase a ~80°F (27°C) antes de las latas de la abertura o.