PROBLEM SYMPTOMS TABLE. Proceed to the reference page shown in the matrix chart below for each malfunction symptom and trouble- shoot for each circuit.
PROBLEM SYMPTOMS TABLE Proceed to the reference page shown in the matrix chart below for each malfunction symptom and troubleshoot for each circuit. HINT: Troubleshooting of the theft deterrent system is based on the premise that the door lock control system is operating normally. Accordingly, before troubleshooting the theft deterrent system, first make certain that the door lock control system is operating normally. Symptom
Suspect Area
See page DI-414 DI-418 DI-431
The theft deterrent system cannot be set
Indicator light circuit ECU power source circuit Key unlock warning switch circuit Luggage compartment door key lock and unlock switch circuit 7. Luggage compartment door courtesy switch circuit 8. Door key lock and unlock switch circuit 9. Door courtesy switch circuit 10.Door unlock detection switch circuit 11.Engine hood courtesy switch circuit
The indicator light does not blink when system is set.
Indicator light circuit
DI-414
When the system is set (The system does not operate when the rear door is unlocked).
Door unlock detection switch circuit
DI-439
When the system is set (The system does not operate when the luggage compartment door is opened by a method other than the key).
Luggage compartment door courtesy switch circuit
DI-435
When the system is set (The system does not operate when the engine hood is opened).
Engine hood courtesy switch circuit
DI-443
When the system is set (It is not canceled when the ignition key is turned to ACC or ON position.
Ignition switch circuit
DI-429
When the system is set (It still operates when the luggage compartment door is opened with the key.
Luggage compartment door key lock and unlock switch circuit
DI-433
While the system is in warning operation (Horns do not sound).
Horn relay circuit
DI-423
While the system is in warning operation (Theft deterrent horn does not sound).
Theft deterrent horn
DI-421
While the system is in warning operation (The starter cut is not cut off).
Starter relay circuit
DI-416
While the system is in warning operation (Headlights do not flash).
Headlight control relay circuit
DI-425
While the system is in warning operation (Taillights do not flash).
Taillight control relay circuit
DI-427
While the system is in warning operation (The door lock is not locked).
Door unlock detection switch circuit
DI-439
System is still set even when a rear door is open
Door courtesy switch circuit
DI-441
Even when the system is not set (Horns sound).
Horn relay circuit
DI-423
Even when the system is not set (Theft deterrent horn sounds).
Theft deterrent horn
DI-421
3. 4. 5. 6.
DI-433 DI-435 DI-437 DI-441 DI-439 DI-443
2002 ECHO (RM884U)
Author:
Date:
582
DI-413 DIAGNOSTICS
-
THEFT DETERRENT SYSTEM
Even when the system is not set (Headlights stay on).
Headlight control relay circuit
DI-425
Even when the system is not set (Taillights stay on).
DIAGNOSTICS. ENGINE. DI-21. 191. Author : Date : 2002 ECHO (RM884U) ... Does not start (Engine does not crank). 6. ... Engine stall (Soon after starting). 1.
L. No up-shift (3rd â O/D). O/D and 2nd brake. L. No lock-up or No lock-up off. Torque converter clutch. AX-34. Harsh engagement (N â D). 1. Forward clutch. 2.
Dogs (homeless). ⢠Cats (homeless). ⢠Turtles ... Low body temperature. â« Often: â Night sweats and ... end and after return to normal. Drugs and plants I took.
Dogs (homeless). ⢠Cats (homeless). ⢠Turtles ... Low body temperature. â« Often: â Night sweats and ... end and after return to normal. Drugs and plants I took.
(b) Install the coil spring to the shock absorber. HINT: Fit the lower end of the coil spring into the gap of the spring low- er seat. (c) Install the upper insulator with ...
When installing the front seat outer belt, take care that the wiring does not interfere with other parts and is not pinched between other parts. 1. INSTALL FRONT ...
INSTALLATION. 1. INSTALL ELECTRIC COOLING FAN TO RADIATOR. Install the cooling fan with the 3 bolts. Torque: 7.5 N·m (80 kgf·cm, 66 in.·lbf). 2. INSTALL ...
(a) Fasten the front seat belts. (b) Drive the car at 10 mph (16 km/h) and slam on the brakes. Check that the belt locks and cannot be extended at this time. HINT:.
NOTICE: Be careful not to damage the serrations. (c) Install the spacer. (d) Coat a new oil seal lip with molybdenum disulfide lithium base grease. (e) Using SST ...
"ERROR!!" Calculation error with the calculator (division by zero). "NOT REACHABLE". Call forwarding if the mobile is not reachable. "NOT AVAIL." Not available.
75.000 - 75.013 mm (2.95275 - 2.95326 in.) Maximum diameter: 75.013 mm (2.95326 in.) If the diameter is greater than maximum, replace the cylinder block. 6.
(a) Remove the door inside handle in order A, B as shown in the illustration. (b) Disconnect the door lock cable from the door inside han- dle. 8. REMOVE PULL ...
INSTALL NEW O-RINGS AND TANKS. (a) After checking that there are no foreign objects in the lock plate groove, install the new O-ring without twisting it. HINT:.
