Hydraulically Pilot Operated Check Valve Series SVLB Characteristics
Pressurizing the X-port relieves the area on top of the poppet to the drain port and allows flow from B to A. The seat design of the SVLB valve series provides ...
Hydraulically Pilot Operated Check Valve Series SVLB
Catalogue HY11-3500/UK
Characteristics Hydraulically pilot operated check valves allow free flow from A to B. The counter-flow direction is blocked. When pressure is applied to control port X, the ring chamber flow from B to A is released. The pilot control ratio is 6:1.
Function When no pressure is applied to the X-port, the flow from B to A is blocked, because the pressure in B is also effective on top of the poppet. Pressurizing the X-port relieves the area on top of the poppet to the drain port and allows flow from B to A. The seat design of the SVLB valve series provides leakfree separation of port A and B in the closed position. Features • Pilot operated check valve • Cavity and mounting pattern acc. to ISO 7368 • Dampening poppet optional • 5 sizes NG16 to NG50
provides shock-free unloading of the fluid, especially at high working pressure and large volumes. Connection for pilot line. Connection for pilot line. Code. RH.
When the valve poppet is open, the large cross-section allows high flow rates at low differential pressure. ⢠Different control ratios can be chosen with the NG6.
Series CM. 7. Ordering Code. Schematics. The valve side is shown at the top of the symbols, the manifold side with channel designation is shown on the bottom.
The valve bodies of the Parker Manapak valve series. PRM are made of steel. ... in the valve body. ⢠Piloting results in a ... The O-rings for sealing the connecting ...
B12 3) zerolap 2). E52. B61. QB = QA /2. ( ) flow for spool B11/B12. Code. Flow [l/min] .... If the minimal supply voltage drops below, it is internally monitored and ...
Adjustment. Throttle valve. Seal. FPM. Design series. (not required for ordering). V. Code ... V. SK-FM2-V-20. Note: The O-ring plate (with. O-rings) for sealing the.
NBR. 5. FPM. Code Solenoid voltage omit. Standard w/o vent function. G0R. 12V= G0Q ... AC: up to 7200, DC: up to 16000 switchings/hour. Coil insulation class.
3. Characteristics. The direct operated control valve D1FP of the nominal ... controlling of pressure and velocity. Driven by the new .... [A] 4.0 medium lag. EMC.
ated or "at rest" condition. When downstream pressure exceeds the value set by the spring force, the control piston moves off its seat, closing off the flow path ...
Cracking pressure. Direct operated check valve. Design series. Seals. Nominal size. Body sealing. Code. Body sealing. 1 sealing for port A. 2 1) sealing for port ...
NBR. 5. FPM. Pilot oil. Code. Pilot. Drain. 4. External via port X1 or X2. External. 5. External ... AC: up to 7200, DC: up to 16000 switchings/hour. Coil insulation ...
Hydraulic Controls Division ... Hydraulic. Max. operating pressure. [bar] Ports P, A, B 350, T 210. Fluid. Hydraulic oil as per DIN 51524...535, other on request.