Direct Operated Check Valve Series CM Characteristics
Series CM. 7. Ordering Code. Schematics. The valve side is shown at the top of the symbols, the manifold side with channel designation is shown on the bottom.
Characteristics Check valves from the Parker Manapak series CM are sandwich plate valves designed for stacking beneath a directional valve with a standardised mounting pattern. Depending on the function required, one or two check valves are arranged in ports P, T, A, and B. Number and flow direction can be selected from the ordering code.
Features • The valve bodies of the Parker Manapak valve series CM are made of steel. • Eight options for the arrangement of the check valve in the body offer a multitude of uses for hydraulic switching. • The function can be changed by turning the valve. • CM2 - NG06 (CETOP3) CM3 - NG10 (CETOP5) Technical data Series Mounting pattern Max. operating pressure Max. flow Opening pressure Mounting position Ambient temperature Fluid temperature Weight
Description Intermediate plate DIN NG06 Intermediate plate DIN NG10
Code Free flow polarity From directional valve to manifold From directional BB valve to manifold From directional DD valve to manifold From manifold to PP directional valve From directional TT valve to manifold From manifold to AAF directional valve From manifold to BBF directional valve From manifold to DDF directional valve AA
Check valve in channel: A B A a. B P T A B A a. B
7
Schematics The valve side is shown at the top of the symbols, the manifold side with channel designation is shown on the bottom.
(manifold side) *O-Ring plate is not shown! This view shows the TT model.
Front side
7
Top view
Seal kit CM2 Seal Order code V SK-CM2-V Note: The O-ring plate for sealing the connecting surface of the manifold side is included. The O-ring plate and the positioning pin are always mounted on the manifold side. CM_UK.INDD RH
When the valve poppet is open, the large cross-section allows high flow rates at low differential pressure. ⢠Different control ratios can be chosen with the NG6.
Pressurizing the X-port relieves the area on top of the poppet to the drain port and allows flow from B to A. The seat design of the SVLB valve series provides ...
provides shock-free unloading of the fluid, especially at high working pressure and large volumes. Connection for pilot line. Connection for pilot line. Code. RH.
3. Characteristics. The direct operated control valve D1FP of the nominal ... controlling of pressure and velocity. Driven by the new .... [A] 4.0 medium lag. EMC.
ated or "at rest" condition. When downstream pressure exceeds the value set by the spring force, the control piston moves off its seat, closing off the flow path ...
Cracking pressure. Direct operated check valve. Design series. Seals. Nominal size. Body sealing. Code. Body sealing. 1 sealing for port A. 2 1) sealing for port ...
Hydraulic Controls Division ... Hydraulic. Max. operating pressure. [bar] Ports P, A, B 350, T 210. Fluid. Hydraulic oil as per DIN 51524...535, other on request.
Adjustment. Throttle valve. Seal. FPM. Design series. (not required for ordering). V. Code ... V. SK-FM2-V-20. Note: The O-ring plate (with. O-rings) for sealing the.
Features. ⢠The direct operated, cushioned piston design results in fast response, low leakage and minimal hysteresis. ⢠Up to 5 pressure adjustment ranges are ...Missing:
Series PRDM are direct operated pressure reducing valves to regulate pressure in one area of a hydraulic circuit at a predetermined level below normal system.
The valve bodies of the Parker Manapak valve series. PRM are made of steel. ... in the valve body. ⢠Piloting results in a ... The O-rings for sealing the connecting ...
B12 3) zerolap 2). E52. B61. QB = QA /2. ( ) flow for spool B11/B12. Code. Flow [l/min] .... If the minimal supply voltage drops below, it is internally monitored and ...
piston type valves with low hysteresis. They can be used as a P-T relief, and a T-T controlled counter balance valve. 4 pressure stages with max. pressure ...
B â T with pressure drops above 120 bar or contamination in the hydraulic fluid. 2) approx. 10% opening, only zero lapped spools. 3) only for overlapped spools.
The proportional directional valves 4DP02 of the nominal size NG10 (CETOP 05) are offered under ... Kaarst, Germany. 3. Technical Data. General. Design.
NBR. 5. FPM. 3) Position control for D5S08/10 only. Spring 2 or 4. Spool A and sleeve 3. Options ... AC: up to 7200, DC: up to 16000 switchings/hour. Solenoid ...
Max. switching frequency. [1/h] 16000 (DC), 7200 (AC) .... The torque for the screw M3 of the plug has to be 0.5 to 0.6 Nm. Surface finish. NBR. BK375. 4x M5x30.
