E-Module for Proportional Valves Series PWDXXA-40* Characteristics
>3.8 mA = solenoid output on (acc. NAMUR NE43). Input signal resolution. [%]. 0.025. Differential input voltage max. [V]. 30 for terminals 5 und 6 against PE ...
E-Module for Proportional Valves Series PWDXXA-40*
Catalogue HY11-3500/UK
Characteristics Parker electronic modules PWDXXA-40* for rail mounting are compact, easy to install and provide time-saving wiring by disconnectable terminals. The digital design of the circuit results in good accuracy and optimal adaption for proportional directional control valves with position sensor by a comfortable interface program. Features The described electronic unit combines all necessary functions for the optimal operation of proportional directional control valves with position transducer or valves in closed loop systems (series D1FC, D*1FS). The most important features are: • Digital circuit design • Parameterizable position control of valve spool • Constant current control • Differential input stage with different signal options • Monitor output for spool stroke • Four-quadrant ramp function • Enable input for solenoid driver • Status indicator • Parametering by serial interface RS-232C • Connection by disconnectable terminals • Valve control with spool feedback • Pressure control with proportional pressure valve and pressure sensor • Position control with proportional DC valve and actuator position transducer • Optional technology function "linearization" • Comfortable interface, see Parker freeware: www.parker.com/euro_hcd → Services → Downloads Block diagram
E-Module for Proportional Valves Series PWDXXA-40*
Catalogue HY11-3500/UK
Technical Data / Ordering Code Technical data General Model Package material Inflammability class Installation position Ambient temperature range Protection class Weight Electrical Duty ratio Supply voltage Switch-on current typ. Current consumption max. Pre-fusing Command signal options
Input signal resolution Differential input voltage max. Enable signal Status signal Monitor signal Adjustment ranges Min Max Ramp Zero offset Current Initial current Interface EMC Connection Cable specification
[g] [%] [VDC] [A] [A] [A] [V] [mA] [mA]
[%] [V] [V] [V] [V] [%] [%] [s] [%] [A] [%]
[AWG] [AWG] [m]
Cable length Options Technology function
11
[°C]
Code1
Module package for snap-on mounting on EN 50022 rail Polycarbonate V2..V0 acc. UL 94 Any -20...+60 IP 20 acc. DIN 40050 160 100 18...30, ripple < 5% eff., surge free 22 for 0.2 ms 2.0 2.5 A medium lag +10...0...-10, ripple
Catalogue HY11-3500/UK. Parker Hannifin ... The optimum dynamics are achieved at a control pressure ... a completely factory set unit with minimum or no need.
Compatible to the relevant European EMC standards. ⢠Comfortable interface, see Parker freeware: www.parker.com/euro_hcd â Services â. Downloads ...
Hydraulic Controls Division ... Hydraulic. Max. operating pressure. [bar] Ports P, A, B 350, T 210. Fluid. Hydraulic oil as per DIN 51524...535, other on request.
B12 3) zerolap 2). E52. B61. QB = QA /2. ( ) flow for spool B11/B12. Code. Flow [l/min] .... If the minimal supply voltage drops below, it is internally monitored and ...
3. Characteristics. The direct operated control valve D1FP of the nominal ... controlling of pressure and velocity. Driven by the new .... [A] 4.0 medium lag. EMC.
Seal. FPM. V. Design series. (not required when ordering). Throttle valve. FM. Throttle ... Seal. V. FM2. The O-ring plate (with O-rings) for sealing the connect-.
Series PRDM are direct operated pressure reducing valves to regulate pressure in one area of a hydraulic circuit at a predetermined level below normal system.
NFPA D03. NFPA D05. NFPA D07. NFPA D08 .... 14. 15. 2 position spools. Code. Spool type a b. 20. 30. 1) Only available for D4L. 2) Consider specific spool.
piston type valves with low hysteresis. They can be used as a P-T relief, and a T-T controlled counter balance valve. 4 pressure stages with max. pressure ...
Hydraulic. Max. operating pressure. [bar]. [bar]. Ports P, A, B 350;. Port T 250. Fluid. Hydraulic oil as per DIN 51524...535, other on request. Fluid temperature.
D*FP*5. Description. Order No. IEC 61076-2-101 M12 / 4 + PE. 5004109. Description. Order No. ... to DIN 24340-A16, size NG16/CETOP07. With * marked ...
Catalogue HY11-3500/UK ... The D3DP, D4P, D9P and D11P are hydraulically control- led 4/3 or 4/2 ... The minimum pilot pressure must be ensured for all op-.
Our PVG valves provide smooth machine control, day in and day out. They are ... other components in your machine system will be reduced. For decades, our.
Aug 21, 2002 - ISO 11898. COB ...... -1 to –128 ...... 128. 7.2.4. Controller output conditioning. The objects defined in this chapter describe parameters of the ...
5A at 250VAC; 1A at 50VDC; 0.2A at 250VDC. The electro-hydraulic pressure switch provides an electric signal when the sensed pressure goes above or below.
PVPV pump side module, without integrated pressure adjustment spool and pressure relief valve. .... Fault monitoring with transistor output for signal source.
Closed centre version without system pressure relief valve for variable displace. â .... 2) Reaction times for PVEH is reduced by 20 by 30 ms if the voltage is not .... Via an external relay pin 3 can be connected to an electrically actuated valve