CRUISE CONTROL.pdf

2002-05 ACCESSORIES & EQUIPMENT Distance & Cruise Control Systems - Repair Instructions - Cooper (1.6L). R50/W10 & Cooper S. Microsoft ...
1MB taille 1 téléchargements 292 vues
2006 MINI Cooper 2002-05 ACCESSORIES & EQUIPMENT Distance & Cruise Control Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S

2002-05 ACCESSORIES & EQUIPMENT Distance & Cruise Control Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S

RADIO CONTROLLED LOCKING 66 12 510 REMOVING AND INSTALLING/REPLACING CONTROL UNIT FOR RADIO REMOTE CONTROL (UP TO 07/2004) NOTE:

As from 07/2004 the control unit for radio remote control (as in the Convertible) is integrated in the interior rearview mirror. Refer to 51 16 060 REMOVING AND INSTALLING OR REPLACING INTERIOR REARVIEW MIRROR .

Necessary Preliminary Tasks:  



Remove clock. Refer to 62 13 050 REMOVING AND INSTALLING/REPLACING CLOCK . Remove interior rear view mirror. Refer to 51 16 060 REMOVING AND INSTALLING OR REPLACING INTERIOR REARVIEW MIRROR . Remove counter-supports for sun visor on left and right. Refer to 51 16 080 REMOVING AND INSTALLING OR REPLACING SUNVISOR AND LEFT OR RIGHT COUNTER SUPPORT .

IMPORTANT: Cover instrument panel trim to prevent screw/scrivets falling into air ducting. Release threaded blind rivet (1).

Microsoft Tuesday, February 16, 2010 12:27:16 12:27:13 PM

Page 1

© 2005 Mitchell Repair Information Company, LLC.

2006 MINI Cooper 2002-05 ACCESSORIES & EQUIPMENT Distance & Cruise Control Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S

Fig. 1: View Of Threaded Blind Rivet Courtesy of BMW OF NORTH AMERICA, INC. NOTE:

As from 09/2001 threaded blind rivet (2) is replaced by a retaining clip (3).

Remove Torx screw (1). Release threaded blind rivet (2) / retaining clip (3). Installation: Replace threaded blind rivet (2) with retaining clip (3).

Microsoft Tuesday, February 16, 2010 12:27:13 PM

Page 2

© 2005 Mitchell Repair Information Company, LLC.

2006 MINI Cooper 2002-05 ACCESSORIES & EQUIPMENT Distance & Cruise Control Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S

Fig. 2: Identifying Retaining Clip Courtesy of BMW OF NORTH AMERICA, INC.

PARK DISTANCE CONTROL 66 20 508 REMOVING AND INSTALLING (REPLACING) CONTROL UNIT (PARK DISTANCE CONTROL) Necessary Preliminary Tasks: 

Remove right hand tail light. Refer to 63 21 180 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT REAR LIGHT .

Disconnect plug connection (1). Release nuts (2) and remove control unit (3). Replacement: Carry out programming/coding. Refer to DIAGNOSIS PROGRAMMING/CODING .

Microsoft Tuesday, February 16, 2010 12:27:13 PM

Page 3

© 2005 Mitchell Repair Information Company, LLC.

2006 MINI Cooper 2002-05 ACCESSORIES & EQUIPMENT Distance & Cruise Control Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S

Fig. 3: Identifying Control Unit Retaining Nuts Courtesy of BMW OF NORTH AMERICA, INC. 66 20 540 REMOVING AND INSTALLING/REPLACING A REAR ULTRASONIC TRANSDUCER Necessary Preliminary Tasks: 

Remove rear bumper trim. Refer to 51 12 156 REMOVING AND INSTALLING REAR BUMPER TRIM .

Expand catches (1) and remove ultrasonic transducer (2) in direction of arrow.

Microsoft Tuesday, February 16, 2010 12:27:13 PM

Page 4

© 2005 Mitchell Repair Information Company, LLC.

2006 MINI Cooper 2002-05 ACCESSORIES & EQUIPMENT Distance & Cruise Control Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S

Fig. 4: Removing Ultrasonic Transducer Courtesy of BMW OF NORTH AMERICA, INC. 66 20 560 REMOVING AND INSTALLING / REPLACING SIGNAL SENSOR Necessary Preliminary Tasks: Remove right hand rear tail light. Refer to 63 21 180 REMOVING AND INSTALLING/REPLACING LEFT OR RIGHT REAR LIGHT . Release screws (1) and place bracket with Park Distance Control unit to one side.

Microsoft Tuesday, February 16, 2010 12:27:13 PM

Page 5

© 2005 Mitchell Repair Information Company, LLC.

2006 MINI Cooper 2002-05 ACCESSORIES & EQUIPMENT Distance & Cruise Control Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S

Fig. 5: Removing Screws From PDC Control Module Courtesy of BMW OF NORTH AMERICA, INC. Disconnect plug connection (1). Release nut (2) and remove signal sensor (3). Installation: When installing, make sure that fitting lug of signal sensor (3) is situated in mounting.

Microsoft Tuesday, February 16, 2010 12:27:13 PM

Page 6

© 2005 Mitchell Repair Information Company, LLC.

2006 MINI Cooper 2002-05 ACCESSORIES & EQUIPMENT Distance & Cruise Control Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S

Fig. 6: View Of Signal Sensor Retaining Nut Courtesy of BMW OF NORTH AMERICA, INC.

Microsoft Tuesday, February 16, 2010 12:27:13 PM

Page 7

© 2005 Mitchell Repair Information Company, LLC.