SCOTT 2011 BIKE OWNERS MANUAL
H
SCALE CARBON
SCOTT SPORTS SA | 17 RTE DU CROCHET | 1762 GIVISIEZ | SWITZERLAND © 2009 SCOTT SPORTS SA, ALL RIGHTS RESERVED | SCOTT-SPORTS.COM
H_scale_carbon_cover.indd 2-3
17.03.10 15:21
P. 004
Geometry Scale
P. 005
Technical Data Scale
P. 006
BB Standards/ FD Mounting Details
P. 006
Chainguide
P. 008
Headset Options
P. 009
BB Cable Guide/Cable Routing
P. 010
Seattube Clamp
P. 012
Replaceable Rear Derailleur Hanger
P. 013
Rear Disc Brake Mount
P. 014
Front Fork Set-Up/Change of Front Fork
P. 015
Warranty
P. 016
ENGLISH
The Scale Carbon bikes should be adjusted exactly to the current rider for reaching maximum safety and fun while riding. All adjustments should be done at the local Scott dealer or following to this manual.
Scale Carbon Concept
SCALE CARBON
SCALE CARBON
CONTENT
2
2011 SCOTT BIKE OWNERS MANUAL
H_scale_carbon_en.indd 2-3
3
19.04.10 11:04
SCALE CARBON CONCEPT
GEOMETRY SCALE
SCALE CARBON
SCALE CARBON
Scale is the result of research and development based on the feedback of the ScottSwisspower Racing Team searching for one of the lightest cross country racing frames in the market. Scott’s focus was not only on lightweight but also on a stiff and easy to handle racing frame.
Size
A
B
C
D
E
F
G
H
I
Head angle
Head tube length
Effective top tube horizontal
Seat angle
BB center to top of seattube
BB center to top tube center
Chainstay length
BB offset
Standover height
°
mm inches mm inches
°
Stem length
Crankarm length
mm inches mm inches mm inches mm inches mm inches
mm
mm
S
70.0°
110
4.3
555
21.9
73.5°
390
15.4
324
12.8
420
16.5
-30
-1.2
733
28.9
90
170
M
70.0°
120
4.7
585
23.0
73.5°
440
17.3
374
14.7
420
16.5
-30
-1.2
765
30.1
90
175
L
70.0°
135
5.3
610
24.0
73.5°
480
18.9
414
16.3
420
16.5
-30
-1.2
792
31.2
100
175
XL
70.0°
160
6.3
640 25.2
73.5°
530 20.9
464
18.3
420
16.5
-30
-1.2
830
32.7
110
175
ENGLISH
SCALE 26“
SCALE 29“
4
2011 SCOTT BIKE OWNERS MANUAL
H_scale_carbon_en.indd 4-5
M
69.5°
105
4.1
600 23.6
72.5°
440
17.3
375
14.8
438
17.2
-60
-2.4
760
29.9
175
L
69.5°
115
4.5
620 24.4
72.5°
480
18.9
415
16.3
438
17.2
-60
-2.4
810
31.9
175
XL
69.5°
125
4.9
640 25.2
72.5°
530 20.9
465
18.3
438
17.2
-60
-2.4
860 33.9
175
5
19.04.10 11:04
Seatpost diameter
34.9mm
Seattube clamp
38,2mm, some models with integrated seatclamp
Headtube diameter
1 1/8” /1.5”, tapered, cups semi-integrated, 50-61mm cup OD
Fork travel
100mm
Fork length
471mm
BB housing
PF BB 92, PF BB 30
Rear Hub Width
135mm
Max tire width
57.0mm/2,25”
Chainring size
Min. 22T, max. 45T
BB STANDARDS / FD MOUNTING DETAILS Scale is available with 2 different Bottom Bracket systems. Both of them are designed for PressFit Cartridges (PF).
The Front Derailleur (FD) clamp is with an inner diameter of 38.2mm, the cable routing on the frame is for “down route/pull - down swing” models. Important Please respect the torque given by Shimano/ Sram A higher tightening torque might cause damage to the FD clamp and/or frame tube!
ENGLISH
PF BB 92 has a housing width of 89.5mm with an inner diameter for the cartridges of 41mm.
PF BB 30 has a housing width of 73mm with an inner diameter for the cartridges of 46mm.
SCALE CARBON
SCALE CARBON
TECHNICAL DATA SCALE
The Front Derailleur (FD) clamp is with an inner diameter of 34.9mm, the cable routing on the frame is for “down route/pull - down swing” models.
6
2011 SCOTT BIKE OWNERS MANUAL
H_scale_carbon_en.indd 6-7
7
19.04.10 11:04
HEADSET OPTIONS
On some Scale Carbon models you will find a chainguide system to support the shifting performance when using 2 chainring cranksets.
Scale Carbon features a tapered headset and fork steerer system to match with semi-integrated headsets of the “50-61”mm range.
3 different mounting plates are available to match the different sizes of the outer chainrings (39/42/45T).
The steerers of those forks are tapered from 1.5” to 1 1/8”. This bigger diameter of the fork steerer as well as on the frame headtube helps to increase the stiffness and handling of the bike.
SCALE CARBON
SCALE CARBON
CHAINGUIDE
ENGLISH
Please note the max. tightening torque of 3Nm/26 in/lbs on the mounting screw of the plate.
Ritchey WCS Carbon Zero Tapered
PF 50-61mm
18mm UD
Ritchey PRO Tapered
PF 50-61mm
12.9mm
It is also possible to use forks with a standard 1 1/8” steerer tube when using a reducer headset such as e.g. Ritchey WCS Carbon Zero Tapered
8
2011 SCOTT BIKE OWNERS MANUAL
H_scale_carbon_en.indd 8-9
PF 50-61mm
18mm UD for 1 1/18 fork
9
19.04.10 11:04
BB CABLE GUIDE / CABLE ROUTING
In case you want to replace the cables, please follow those steps: 1. Remove the clip-in BB Guide in the BB housing
SCALE CARBON
A special BB Cable Guide was developed for Scale Carbon which is available as a spare part at the Scott distribution.
2. Push the inner cables from the front downward inside the downtube to the BB housing. Please make sure to follow the cable routing as shown below: SCALE CARBON
Scale Carbon features also an internal cable routing for front and rear derailleur.
3. Pull them out on the related holes (RD on right side, FD on left side) on the BB housing. Rear derailleur
Front derailleur
4. Push them through the related holes on the BB Guide and clip the BB Guide into the BB housing ENGLISH
Please note that the outer housing of the FD and RD cables will stop at the cable stop/ port on the front end of the down tube.
5. Follow the standard set up and assembly instructions of the shifting system manufacturer for final adjustment of the shifting system
10
2011 SCOTT BIKE OWNERS MANUAL
H_scale_carbon_en.indd 10-11
11
19.04.10 11:04
REPLACEABLE REAR DERAILLEUR HANGER
Scale Carbon features two different versions of the seatpost fixation on the seattube.
Scale Carbon is using the same replaceable rear derailleur hanger as Scott Spark and Genius. This spare part can be ordered via the Scott distribution with article number 206473.
SCALE CARBON
SCALE CARBON
SEATTUBE CLAMP
Integrated clamp type: This fixation shaves off approx. 15 grams in comparison to a regular seattube clamp. Please note the maximum tightening torque on the fixing bolt of 5Nm/44 in/lbs to avoid damages on frame, clamp parts or the seatpost.
ENGLISH
Please make sure to use always the washer between the 2 clamp parts to avoid damages on the frame, seatpost or clamp mechanism. seatclamp M5 nut seatclamp washer seatclamp nut seatclamp M5 screw
Standard type: Please make sure to only use a seatclamp with an inner diameter of 38.2mm and please note the maximum tightening torque on the fixing bolt of 5Nm/44 in/lbs
12
2011 SCOTT BIKE OWNERS MANUAL
H_scale_carbon_en.indd 12-13
13
19.04.10 11:04
SCALE CARBON
The rear disc brake on Scale Carbon is Postmount (PM) Standard on the left chainstay and optimized for 160mm/6” rotors, so the calliper can be mounted directly without adapters on the Postmount fixation.
For the set up of the front fork please use the fork specific manual attached to the bike. We recommend using front forks with distance of 471mm/18.54” between mid of axle to top of crown, as this will not influence the geometry and alter handling of the bike.
ENGLISH
Please note Scale Carbon is designed for disc rotors between 160mm/6” and 185mm/7” (adapter needed from manufacturer of the brake)only.
FRONT FORK SET-UP/ CHANGE OF FRONT FORK: SCALE CARBON
REAR DISC BRAKE MOUNT
14
2011 SCOTT BIKE OWNERS MANUAL
H_scale_carbon_en.indd 14-15
15
19.04.10 11:04
WARRANTY
WARRANTY
Model
Year
Size
SCALE CARBON
SCALE CARBON
SCOTT bikes are made using the most innovative production and quality methods. They are equipped with best components of well known parts suppliers. Doing so SCOTT warrants its frames and swingarms for five years (subject to compliance with maintenance ranges, see below) and SCOTT forks (provided it is a fork of SCOTT) for two years for defects in material and/or workmanship in case of purchase of completely assembled bikes. This warranty of 5 years for the frames shall only be granted in case once a year a maintenance service has been effected according to maintenance requirements as set forth in this manual by an authorised SCOTT dealer. The authorised SCOTT dealer shall confirm the effected annual maintenance service by stamp and signature. Frame
In case such an annual maintenance service has not been effected the warranty of 5 years for the frame shall be reduced to 3 years. Costs for maintenance and service have to be born by the owner of the SCOTT bike. On Gambler, Voltage Fr and Volt-X the warranty period is limited to 2 years. The warranty period starts at the day of purchase. This warranty is limited to the first buyer, what means the first person who uses the bike and only with the use it was made for. Furthermore, this warranty is limited to purchases via authorized SCOTT-dealers The warranty is solely granted in case of purchase of a completely assembled bike to the explicit exclusion of purchases of not completely assembled bikes. ENGLISH
In case of a warranty claim the decision to repair or to replace the defective part is up to SCOTT. Non defective parts will only be replaced at the guarantee’s own expense. Fair wear and tear is not covered by the warranty. A complete list of all parts of wear and tear can be found in the next chapter of this manual. In addition, you will find at the end of this manual a protocol for the handing over of the bike which will remain in copy at the SCOTT dealer after acceptance and signature of the consumer. It is obligatory to show this protocol of handing over together with the defective part in case of a warranty claim given that it provides evidence of purchase. Otherwise no warranty is granted. In principle, this warranty is granted worldwide. Claims must be made through an authorized dealer, for information regarding the nearest dealer, write or call this company or the national SCOTT distributor. Normal wear, accident, neglect, abuse, improper assembly, improper maintenance by other than an authorized dealer or use of parts or devices not consistent with the use originally intended for the bicycle as sold are not covered by this warranty. Hereby SCOTT grants a voluntarily manufacturer’s warranty. Additional entitlements according to national warrant of merchantability are reserved.
16
2011 SCOTT BIKE OWNERS MANUAL
H_scale_carbon_en.indd 16-17
17
19.04.10 11:04