MSDS TIXO SLIDE PRE ISO 22, 32, 46 UK

Apr 18, 2005 - Recommended extinguishing means. Carbon dioxide, powder, sand, water fog ... 9 - Physical and chemical properties. Aspect. Liquid. Colour.
65KB taille 200 téléchargements 651 vues
Safety data sheet n°1546.V2 date of creation : 18/04/2005

TIXO-SLIDE® PRE ISO 22, 32, 46 updated on : en cours de modification SAV/FDS 28/01/2010 08:59

1 - Product and Company identification Supplier

Use

PETRONAPHTE 321 Bd D. Casanova 13014 Marseilles (France) Phone (33) 04 91 95 05 54 00 - Fax (33) 04 91 02 59 90 PETRONAPHTE : Stéphanie GEFFROY- FOURMENT (33) 04 95 05 54 14 Lubricant for textile machines

2 - Composition/Information on ingredients Substance or Preparation Chemical names of ingredients

Preparation Mineral oil and surfactants

Emergency telephone n°

3 - Hazards identification Specific hazards

Product not referenced as dangerous according to regulations

European

4 - First-aid measures In case of skin contact In case of contact with eyes If swallowed

Wash immediately with plenty of water and soap Rinse immediately with plenty of water at least 15 minutes Seek medical advice immediately and show this container or label

5 - Fire-fighting measures Flash point Recommended extinguishing means Extinguishing means Specific protective fire fighting measures

> 130° C Carbon dioxide, powder, sand, water fog straight jets of water Cool down sides of storage tanks with water fog

6 - Accidental release measures Individual precautions Waterproof gloves (PVC, rubber), safety goggles Precautions to be taken for environment Avoid releasing into the environment protection Cleaning methods Dispose according to local or national regulations in application 7 - Handling and storage Individual preventive measures for handling Prevention of fires and explosions Recommended storage conditions Compatible matters

Waterproof gloves (PVC, rubber), safety goggles Store at a temperature below 50° C, in closed containers Between 0° and 40° C in closed containers Aluminium, stainless steel, polyethylene

8 - Exposure controls/Personal protection Individual measures of prevention

Waterproof gloves (PVC, rubber), safety goggles

9 - Physical and chemical properties Aspect Colour Odour Flash point (°C) Solubility in water Solubility in solvents Density at 20° C : approximately

Liquid Slightly yellow Faint > 130° C Emulsionable Soluble in petroleum solvents 0,86

Ref ST 95055.V3

Page 1/08:59

TIXO-SLIDE® PRE ISO 22, 32, 46

Safety data sheet n°1546.V2 date of creation : 18/04/2005

updated on : en cours de modification

10 - Stability and reactivity Stability

Stable in recommended handling and storage conditions

11 - Toxicological information Local effects

No risk in usual conditions

12 - Ecological information No data available 13 - Disposal considerations Disposal of wastes Elimination of the soiled packagings

Incineration in an approved centre Destruction or recycling through a specialized co. according to local regulations

14 - Transport information Product not classified as dangerous for transport 15 - Regulatory information Labelling and EEC classification

Product not referenced as dangerous according to European regulations

16 - Other information This safety data sheet was written according to the 91/155/EEC instruction. It completes the technical data sheets but does not replace them. The information it contains is based on our knowledge of the product mentioned at the indicated date. It is given in all good faith. We also draw the users' attention on the possible risks taken when a product is used for other utilizations than those for which it is intended. It does not however exempt the user from knowing and applying all the regulations concerning his activity. He will be sole responsible for taking all the precautions when using dangerous products. Our only aim in mentioning the compulsory presciptions is to help the user to meet all his obligations when using a dangerous product. This list should not be considered complete and does not exempt the user from informing himself on any further obligation he would have to fulfill concerning the handling of the product for which he is sole responsible.

Ref ST 95055.V3

Page 2/08:59