TABLE BASE (top not included) BASE DE TABLE (dessus non-inclus)
50562 / 50567
Thank you for choosing an Amisco product Merci d’avoir choisi un produit Amisco IMPORTANT Dealer or installer: Leave all documents to the consumer.
Détaillant ou installateur: Laissez tous les documents au consommateur. Consumer: Keep this document with your proof of purchase for reference. Consommateur: Conservez ce document avec votre preuve d’achat pour référence.
Problems, assembly videos, warranty, product care or other information? Do not contact or return your product to the store
www.amisco.com 1 800 361-6360 Problèmes, vidéos d’assemblage, garantie, conseils d’entretien ou autre information?
Contact us within 30 days from your purchase date. Monday to Friday, from 8:30 a.m. to 12 p.m., 1 p.m. to 4:30 p.m. (Eastern standard time). Keep handy your proof of purchase and the Amisco product number when calling.
Amisco product number/Numéro du produit Amisco
1 2 3 4
DESCRIPTION Leg Patte Crossbar Traverse Plate Plaque Hardware bag Sac de quincaillerie
Contactez-nous dans les 30 jours suivant votre achat. Du lundi au vendredi, de 8h30 à 12h00, 13h00 à 16h30 (heure de l’Est). Ayez sous la main votre preuve d’achat et le numéro de produit Amisco au moment d’appeler.
HARDWARE LIST / LISTE DE LA QUINCAILLERIE
PARTS LIST / LISTE DES PIÈCES
ITEM
Ne contactez pas le magasin, ne retournez pas votre produit
QTY 2 1 4
ITEM A B C
DESCRIPTION Bolt Boulon Wood screw Vis à bois Swivel glide Glisseur pivotant
QTY
20 MM 1/4-20nc 3/4” #10
16 16 4
1
TWO (2) PEOPLE ARE REQUIRED TO ASSEMBLE THIS PRODUCT LIST OF TOOLS REQUIRED: - A phillips screwdriver. - An allen key 5/32” (included). - A mesuring tape or ruler. IMPORTANT: In order to prevent any damage to this product, DO NOT USE ANY POWER TOOL to assemble it.Assemble this product by hand.
DEUX (2) PERSONNES SONT REQUISES POUR ASSEMBLER CE PRODUIT LISTE DES OUTILS NÉCESSAIRES: - Un tournevis étoile. - Une clé allen 5/32” (incluse). - Un ruban à mesurer ou règle. IMPORTANT: Afin de prévenir tout dommage à ce produit, NE PAS UTILISER D’ OUTILS ÉLECTRIQUES pour son assemblage. Assembler ce produit manuellement.
1
1
C
1) Screw on glides C under legs 1 . In order to protect certain floor coverings, we suggest you to use self-adhesive felts under legs. Visser les glisseurs C sous les pattes 1 . Afin de protéger certains revêtement de plancher, nous suggérons d’utiliser des feutres autocollants sous les pattes.
2
2) Screw on lightly plates 3 on the crossbar 2 with bolts A. Visser légèrement les plaques 3 sur la traverse 2 à l’aide des boulons A .
A 3
3 1
3) Screw on lightly plates 3 on the legs 1 with bolts A . Visser légèrement les plaques 3 sur les pattes 1 à l’aide des boulons A .
1
4) Align plates 3 , the legs 1 and the crossbar 2 and tighten firmly all bolts A . Aligner les plaques 3 , les pattes 1 et la traverse 2 et visser fermement tous les boulons A.
A
2
1
5) Put the table top upside down on a large blanket to protect its finished surface. Put the base on the wood top . With the ruler or mesuring tape, center base in the wood top. Placer le dessus de table à l’envers sur une grande couverture pour protéger son côté fini. Mettre la base de table sur le dessus de bois. À l’aide de la règle ou du ruban à mesurer ,centrer la base sur le dessus de bois.
B
6) Screw on the base with screws B . Warning: Some table tops do not have pre-drilled holes for this base. Visser le base de table à l’aide des vis B . Attention: Certains dessus de table n’ont pas de trous pré-percés pour cette base.
WARNING MISE EN GARDE
!
SAFETY INSTRUCTIONS INSTRUCTIONS DE SÉCURITÉ
Periodically inspect your table and tighten all screws, nuts and bolts. Failure to follow the basic safety and maintenance instructions listed here may cause product damage or injuries. Inspectez périodiquement votre table et resserrez les vis, écrous et boulons. Le non respect des quelques règles de sécurité et de maintenance énumérées ici peut occasionner des dommages au produit ou des blessures. 2
8) Insert the tubular spacer in the groove on the wooden backrest. Insert the ... the upper portion of the base, slide it down in place and screw it on with E screws.
( May happen during shipping. ) 1) Verify your product on ... 2) Put the unassembled product (no seat nor gliders) on a hard level surface and find which 2 legs are ...
Verify your product on several floor locations to confirm that the product is not level. 2). Put the unassembled product (no seat nor gliders) on a hard level.
Un tournevis étoile. - Une clé allen 5/32” (incluse). IMPORTANT: In order to prevent any damage to this product, DO NOT USE ANY POWER TOOLS to assemble it.Assemble this product manually. IMPORTANT: Afin de prévenir tout dommage à ce produit,. NE PAS
Insérer le haut du dossier rembourré 3 contre les taquets ou l'équerre du haut de la base 1 . 4) Push the bottom of the 3 upholstered backrest against the bottom ...
Visser M dans le trou rond. 3.2) Screw M into oblong hole. Visser M dans le trou oblong. 3.3) Screw T , do not overtight. Visser les vis T , ne pas trop serrer. 2 X.
Take the product by one of the longer legs, and hit strongly the opposite leg on the ground. Protect ... HARDWARE LIST / LISTE DE LA QUINCAILLERIE. ITEM.
NE PAS UTILISER D' OUTILS ÃLECTRIQUES pour son assemblage. Assembler ce produit manuellement. 1) Screw on glides D under legs 2. In order to protect ...
Scan this QR code or watch the video in the assembly section of the product page on our website. Scanner ce code QR ou consultez la section assemblage de ...
votre produit. Do not contact or return your product to the store. Problèmes ou information? Problems ... Take the other side and move it until the plastic plugs are ...
Insérer le haut du dossier rembourré 4 contre les taquets ou l'équerre du haut du dossier soudé 2 . 6) Push the bottom of the 4 upholstered backrest against the ...
Do not contact or return your product to the store. Problèmes ou information? ... Du lundi au vendredi, de 8h30 ... 5) Place a rag on top of the plastic fasteners.
big part and press on the Velcro bands. Visser la grosse partie du dos 4 sur la structure 2 Ã l'aide des vis E . Aligner la partie du dos 4 sur la grosse et appuyer une pression sur les bandes de Velcro . 2. E. 4. 6) Push the seat 3 against crossbar
Un ruban à mesurer ou règle. ... Panneau remb. côté gauche. 1 ... Ayez en main votre preuve d'achat, le numéro de produit Amisco et l'etiquette du produit.
Scan this QR code or watch the video in the assembly section of the product page on our website. SE Scanner ce code QR ou consultez la section assemblage ...
Questions? Contact us! / Des questions? Contactez-nous! Monday to Friday, from 8:30 a.m. to 12 p.m., 1 p.m. to 4:30 p.m. (Eastern standard time). Keep handy ...