Do not contact or return your product to the store. Problèmes ou information? ... Du lundi au vendredi, de 8h30 ... 5) Place a rag on top of the plastic fasteners.
Thank you for choosing an Amisco product Merci d’avoir choisi un produit Amisco IMPORTANT Dealer or installer: Leave all documents to the consumer.
Détaillant ou installateur: Laissez tous les documents au consommateur. Consumer: Keep this document and the warranty sheet with your proof of purchase for reference. Consommateur: Conservez ce document et la feuille de garantie avec votre preuve d’achat pour référence.
Problems or information?
Do not contact or return your product to the store Contact us within 30 days from your purchase date. Monday to Friday, from 8:30 a.m. to 12 p.m., 1 p.m. to 4:30 p.m. (Eastern standard time). Keep handy your proof of purchase and the Amisco product number when calling.
www.amisco.com 1 800 361-6360
Ne contactez pas le magasin, ne retournez pas votre produit
Problèmes ou information?
Amisco product number/Numéro du produit Amisco
Contactez-nous dans les 30 jours suivant votre achat. Du lundi au vendredi, de 8h30 à 12h00, 13h00 à 16h30 (heure de l’Est). Ayez sous la main votre preuve d’achat et le numéro de produit Amisco au moment d’appeler.
LIST OF TOOLS REQUIRED :
LISTE DES OUTILS NÉCESSAIRES :
- A mallet - A phillips screwdriver - Do not use power tools.
- Un maillet - Un tournevis étoile. - Ne pas utiliser d’outils électriques.
PARTS LIST / LISTE DES PIÈCES ITEM 1 2 3 4 5 6 7
DESCRIPTION Right side Côté droit Left side Côté gauche Metal backrest Tôle du dos Seat Siège Upholstered backrest front Dossier rembourré avant Upholstered backrest back Dossier rembourré arrière Hardware bag Sac de quincaillerie
QTY 1
HARDWARE LIST / LISTE DE LA QUINCAILLERIE ITEM A
1
B
1
C
1
D
DESCRIPTION Bolt 7/8” x 1/4-20NC Boulon Bolt 1 1/4” x 1/4-20NC Boulon Metal screw 3/4” 10-24NC Vis à métal Glide Glisseur
QTY 8 4 2 4
1 1 1
1
1) Place the seat 4 on a stable surface. Screw lightly the right side 1 and the left side 2 on the seat 4 with A and B bolts.Tighten all screws. Placer le siège 4 sur une surface stable. Visser légèrement le côté droit et le côté gauche 1 et 2 sur le siège 4 à l’aide des boulons A et B. Visser fermement tous les boulons. 2) Insert D glides under the right and left side 1 and 2 . In order to protect certain floor coverings, we suggest you to use self-adhesive felts under legs. Insérer les glisseurs D sous le côté droit et gauche 1 et 2 . Afin de protéger certains revêtements de plancher, nous suggérons d’utiliser des feutres autocollants sous les pattes.
D
B
1
1 2
4 Front of the seat Avant du siège
B
2
A
4
A
B C
3
3) Aling metal backrest 3 with holes of the upholstered backrest front 5 holes. Screw lightly the C screws, then perfectly align all holes and tighten the C screws. Aligner les trous du dossier métallique 3 avec ceux du dossier rembourré avant 5.Visser légèrement les vis C , ajuster le dossier pour aligner les trous et resserrer les vis C.
5 4) Align plastic plugs on one side of the back part 6 and push firmly. Take the other side and move it until the plastic plugs are perfectely aligned with holes of the metal backrest 2 then push firmly. Aligner les fixations de plastique d’un des côtés de la partie arrière 6 puis pousser à fond. Prendre l’autre côté et le déplacer jusqu’à ce que les fixations soient vis à vis les trous de la tôle du dos 3 et pousser fermement.
5) Place a rag on top of the plastic fasteners and hammer them down to complete the installation. Placer un chiffon vis à vis les attaches de plastique et à l’aide d’un maillet finir l’insertion des attaches .
6) Screw the assembled metal backrest 3 to seat 4 with bolts A .Tighten. Visser l’assemblage de la tôle du dos 3 au siège 4 à l’aide des boulons A . Visser fermement.
6
A 4
6 3
3 WARNING MISE EN GARDE
SAFETY INSTRUCTIONS INSTRUCTIONS DE SÉCURITÉ
Periodically inspect your chair and tighten all screws, nuts and bolts. If the seat can no longer be screwed tightly to the chair base or if you find a broken weld or a bent leg, stop using your chair and contact Amisco customer service. Failure to follow the basic safety and maintenance instructions listed here may cause product damage or injuries. Inspectez périodiquement votre chaise et resserrer les vis, écrous et boulons. Si le siège ne peut plus être vissé fermement à la base de la chaise ou si vous trouvez une soudure brisée ou une patte croche, cessez d’utiliser votre chaise et appelez le service à la clientèle d’Amisco. Le non respect des quelques règles de sécurité et de maintenance énumérées ici peut occasionner des dommages aux produits ou des blessures. 2
8) Insert the tubular spacer in the groove on the wooden backrest. Insert the ... the upper portion of the base, slide it down in place and screw it on with E screws.
( May happen during shipping. ) 1) Verify your product on ... 2) Put the unassembled product (no seat nor gliders) on a hard level surface and find which 2 legs are ...
Verify your product on several floor locations to confirm that the product is not level. 2). Put the unassembled product (no seat nor gliders) on a hard level.
Un tournevis étoile. - Une clé allen 5/32” (incluse). IMPORTANT: In order to prevent any damage to this product, DO NOT USE ANY POWER TOOLS to assemble it.Assemble this product manually. IMPORTANT: Afin de prévenir tout dommage à ce produit,. NE PAS
Insérer le haut du dossier rembourré 3 contre les taquets ou l'équerre du haut de la base 1 . 4) Push the bottom of the 3 upholstered backrest against the bottom ...
Visser M dans le trou rond. 3.2) Screw M into oblong hole. Visser M dans le trou oblong. 3.3) Screw T , do not overtight. Visser les vis T , ne pas trop serrer. 2 X.
Take the product by one of the longer legs, and hit strongly the opposite leg on the ground. Protect ... HARDWARE LIST / LISTE DE LA QUINCAILLERIE. ITEM.
NE PAS UTILISER D' OUTILS ÃLECTRIQUES pour son assemblage. Assembler ce produit manuellement. 1) Screw on glides D under legs 2. In order to protect ...
Scan this QR code or watch the video in the assembly section of the product page on our website. Scanner ce code QR ou consultez la section assemblage de ...
votre produit. Do not contact or return your product to the store. Problèmes ou information? Problems ... Take the other side and move it until the plastic plugs are ...
Insérer le haut du dossier rembourré 4 contre les taquets ou l'équerre du haut du dossier soudé 2 . 6) Push the bottom of the 4 upholstered backrest against the ...
big part and press on the Velcro bands. Visser la grosse partie du dos 4 sur la structure 2 Ã l'aide des vis E . Aligner la partie du dos 4 sur la grosse et appuyer une pression sur les bandes de Velcro . 2. E. 4. 6) Push the seat 3 against crossbar
Un ruban à mesurer ou règle. ... Panneau remb. côté gauche. 1 ... Ayez en main votre preuve d'achat, le numéro de produit Amisco et l'etiquette du produit.
Scan this QR code or watch the video in the assembly section of the product page on our website. SE Scanner ce code QR ou consultez la section assemblage ...
Questions? Contact us! / Des questions? Contactez-nous! Monday to Friday, from 8:30 a.m. to 12 p.m., 1 p.m. to 4:30 p.m. (Eastern standard time). Keep handy ...