LS 14250 3.6 V primary lithium thionyl chloride (Li-SOCl2) High Energy Density bobbin 1⁄2 AA-size cell
For applications requesting good voltage response and operating life in – 60/+85˚C environments.
1
⁄ 2 UM3 - 1⁄ 2 R6 - 1⁄ 2 AA
Cell size references Electrical characteristics
Key features
(typical values for cells stored for one year or less) Nominal capacity
●
(at 1.5 mA +20˚C 2 V cut off. The capacity restored by the cell varies according to current drain, temperature and cut off) Open circuit voltage
(at +20˚C)
3.67 V
Nominal voltage
(at 0.1 mA +20˚C)
3.6 V
Pulse capability : Typically up to 15 mA. (Varies according to pulse characteristics, temperature, cell history and the application’s acceptable minimum voltage. Fitting the cell with a capacitor may be recommended in severe conditions. Consult Saft) Continuous current permitting 50% of the nominal capacity to be achieved at +20˚C with 2 V cut off. (Higher currents possible, consult Saft)
40 mA
Storage
+ 30˚C max
(recommended) (for more severe conditions, consult Saft)
Operating temperature range (Operation above ambient T may lead to reduced capacity and lower voltage readings at the beginning of pulses. Consult Saft)
– 60/+ 85˚C
Main applications
Other characteristics Li metal content
approx. 0.3 g
Diameter (max)
14.65 mm (0.58 in)
Height (max)
24.8 mm
Typical weight
8.9 g
Available termination suffix
High and stable operating voltage Low self discharge rate (less than 1% after 1 year of storage at +20˚C) ● Stainless steel container and end caps (low magnetic signature) ● Hermetic glass-to-metal sealing ● Non-flammable electrolyte ● Compliant with IEC 86-4 safety standard ● Underwriters Laboratories (UL) Component Recognition (File Number MH 12609) ● Non-restricted for transport ●
Utility metering Automatic meter reading ● Alarms and security devices ● Tollgate systems ● Memory back-up ● Computer real-time clocks ● Tracking systems ● Automotive electronics ● Professional electronics ... etc. ● ●
Voltage plateau versus Current and Temperature (at mid-discharge)
LS 14250
Typical discharge profiles at +20˚C
Restored Capacity versus Current and Temperature (2 V cut off)
12, rue Sadi Carnot 93170 Bagnolet - France Tel +33 1 49 93 17 25 Fax +33 1 49 93 19 69 www.saftbatteries.com Doc. No 31042-2-1003 Published by the Communications Department Information in this document is subject to change without notice and becomes contractual only after written confirmation by Saft.
Société anonyme au capital de 76 200 000
- B 383 703 873 R.C.S. Bobigny - Crédit photo; Le cocotier bleu - AA
Vérifier si les câbles des poignées du cardio-fréquencemètre ne sont pas lâches ou endommagées. 3.Veuillez contacter votre service de soutien technique à la ...
IMMOBILISATIONS CORPORELLES. TOTAL (II) BJ. BK. TOTAL GÃNÃRAL (I à VI) CO. (2) Part à moins d'un an des immobilisations financières nettes : (3) Part à ...
Nov 28, 2005 - shell elements, eight node solid shell elements, truss elements, ...... construct a new mesh that is staggered with respect to original mesh for ...
search for the manual of yourchoice online. Here, it is possible to work with google to browse through the available user guide and find the mainone you'll need.
10 ms. Retard à la disponibilité. T1 = environ 2 s. Temps de réponse à la mise sous tension. T4 = 500 ms. Coordination de l' ... Montage rail DIN 45 mm ...
1. Elevate the Sheer-Grille off of a flat surface. This will ensure even coverage of the grille frame and make it easier to pick up. Mounting Idea: A single spray can ...