Tri-sector Antenna System 5880903-PACK…* 5880803G-PACK…* Self supporting structure with a tri-sector antenna on a non-penetrating platform (bedframe) Triband Antennas, 6 connectors per sector Ideal for quick roll-out on rooftop installation 388 mm diameter antenna, 4.35 m total height Antenna azimuth panning ±15° per sector Independent variable downtilt on each sector 0°-10°/0°-12°/0°-12°
XXXpol / 65° Az 880-960/1710-2170/1710-2170 MHz
Tri-sector with azimuth panning
* Model number options: see next page for a detailed list of the various versions presented here General Description The TRIO-PACK is a ready-to-use tri-sector system package that comes with a tri-sector antenna from our TRIO range, a mast section and a non-penetrating platform. The mast section has the same diameter as the TRIO antenna (388 mm). It is closed by a shroud with same colour as the antenna, and can be open for inside access (cabling, maintenance …). Depending on the model number option, the TRIO-PACK may include 3 UMTS2100 dual MHAs and may come with RET control on each sector. The 3 MHAs are housed inside the mast section.
DT 5395 - Ed A - page 1/3 - We reserve the rights to modify our products without prior notice.
TRIO Antenna
Mast Section
Non-Penetrating Platform
Antenna main characteristics (per sector / each sector has a triband antenna) Low Band Red Frequency Band (MHz) Gain (dBi) tilt 0° tilt 5° tilt 10° Polarisation
High Band White
High Band Blue
880…960
1710…1880
1900…2170
1710...1880
1900...2170
17.0...17.5 17.0...17.5 16.9...17.4
16.5...16.7 16.3...16.5 16.0…16.3
16.7...17.2 16.5…17.0 16.3…16.5
16.5…16.9 16.4…16.7 16.3…16.5
16.9…17.3 16.7…17.2 16.5…17.0
±45°
±45°
±45°
Horizontal Beamwidth (-3 dB)
65°
65°
62°
65°
62°
Vertical Beamwidth (-3 dB)
7°
7°
7°
7°
7°
Electrical Downtilt range Connectors Antenna diameter / height Azimuth panning capability Sector antenna bearings
0° to 10°
0° to 12° 0° to 12° 18 (6 per sector) x 7/16 DIN Female "Long Neck" 388 mm / 3.07 m ±15° per sector, independent setting 0°±15° / 120°±15° / 240°±15°
For detailed specification of the antenna, see the 5880903 datasheet The tri sector antenna can be supplied with only 1 or 2 sectors fitted with an antenna - consult us. A lightning finial is available as optional accessory (p/n: TRX-LPK)
w w w. j a yb e a m wi r e le s s . co m
Tri-sector Antenna System 5880903-PACK…* 5880803G-PACK…* Description of the model options
z in the model number is used to code the MHA Current Window Alarm compliancy to Node-B
DT 5395 - Ed A - page 2/3 - We reserve the rights to modify our products without prior notice.
Value for z A K H
Node-B vendor compliancy Alcatel-Lucent/Nortel Nokia-Siemens (WMHB compatible) Huawei
5880903-PACK200
Delivery includes: - a tri-sector anteniemenna type 5880903 (manual downtilt control), - a mast section (TRX380-E085-002), same diameter as the antenna, - a non penetrationg platform, - all the bolts and nuts needed for the assembly
5880903-PACK20zG
Delivery includes: - a tri-sector antenna type 5880903 (manual downtilt control), - a mast section (TRX380-E085-002), same diameter as the antenna, - a non penetrationg platform, - 3 x UMTS2100 dual MHA (AISGv2.0) type TTA-UMG100z-T - the 6 coaxial jumpers between the 3 dual MHAs and the UMTS2100 ports of each antenna sector. - all the bolts and nuts needed for the assembly.
5880803G-PACK20zG
Delivery includes: - a tri-sector antenna type 5880803G (with remote downtilt control according to 3GPP/AISGv2.0), - a mast section (TRX380-E085-002),,same diameter as the antenna, - a non penetrationg platform, - 3 x UMTS2100 dual MHA (AISGv2.0) type TTA-UMG100z-T - the 6 coaxial jumpers between the 3 dual MHAs and the UMTS2100 ports of each antenna sector. - 3 AISG cables between the MHAs and the RET units (MDCU), - all the bolts and nuts needed for the assembly.
5880903-PACK21zG
Delivery includes: - a tri-sector antenna type 5880903 (manual downtilt control), - a mast section (TRX380-E085-002), same diameter as the antenna, - a non penetrationg platform, - 3 x UMTS2100 dual MHA (AISGv2.0) type TTA-UMG100z-T - 3 x dual triplexer type TPX-002 - the 6 coaxial jumpers between the 3 dual MHAs and the UMTS2100 ports of each antenna sector. - all the bolts and nuts needed for the assembly.
Note: there is no room inside the cylindrical mast structure to install the triplexers. They will have to be installed close to where the jumpers go out from the mast. The coaxial jumpers between the triplexers and the antenna or MHA are not provided.
5880803G-PACK21zG
Delivery includes: - a tri-sector antenna type 5880803G (with remote downtilt control according to 3GPP/AISGv2.0), - a mast section (TRX380-E085-002), same diameter as the antenna, - a non penetrationg platform, - 3 x UMTS2100 dual MHA (AISGv2.0) type TTA-UMG100z-T - 3 x dual triplexer type TPX-002 - the 6 coaxial jumpers between the 3 dual MHAs and the UMTS2100 ports of each antenna sector. - all the bolts and nuts needed for the assembly.
Note: there is no room inside the cylindrical mast structure to install the triplexers. They will have to be installed close to where the jumpers go out from the mast. The coaxial jumpers between the triplexers and the antenna or MHA are not provided.
w w w. j a yb e a m wi r e le s s . co m
Tri-sector Antenna System 5880903-PACK…* 5880803G-PACK…* MHA main characteristics Downlink (TX) Path Frequency Band Insertion Loss
2110 – 2170 MHz 0.4 dB max for type TTA-UM100z
Uplink (RX) Path Frequency Band Gain (LNA Mode) Noise Figure (LNA Mode) Bypass mode Insertion Loss, Bypass mode
1920 – 1980 MHz 12 ± 1 dB 1.1 dB typ. Yes, bypass is the default mode for each channel when not powered 3.5 dB max
Power Supply, Control and Alarms DC Supply Voltage via BTS-RF cable AISG control Current Alarm mode
+9 to +30 V DC Yes, AISGv2.0, auto-select on valid AISG frames Yes, default mode if no AISG signal is received. Alarm current values depends on the coded value for z.
For detailed specification of the MHA, see the TTA-UM000z datasheet Supporting Structure mechanical characteristics 4.35 m (above roof) Total height including antenna (TOP) Bottom of RF array inside antenna
1.67 m (above roof)
Antenna connectors level
1.53 m (above roof)
Mast section - height
0.85 m
Mast section - diameter
388 mm
Dimensions on roof
3.7 m x 2.1 m (see diagram below)
Coaxial cables capacity inside the mast
12 x half-inch coaxial cables
Coaxial cables output
20 cm space without shroud at bottom of the mast
DT 5395 - Ed A - page 3/3 - We reserve the rights to modify our products without prior notice.
Material
platform and mast mast shroud
Hot dipped galvanized steel UV resistant plastic
Wind Speed
Operational: 160 km/h
Stability
By additional ballast installed in the housings A, B, C. ballast weight: 40 kg in A, 40 kg in B, 160 kg in C Ballast can be made of any standard concrete blocks, and must be secured to the housings by metal strap bands. 5880903 antenna: 100 kg Platform and mast: 405 kg Ballast: 240 kg Total weight: 745 kg A detailed installation manual is supplied with the pack. Sheets of extruded polyester (XPS) foam must be installed under the platform to protect the roof. These sheets, the needed ballast materials and the metal strap bands are not supplied with the pack.
Weights Installation
Platform top view
Survival: 200 km/h
3.7 m
B
A
2.1 m
C
w w w. j a yb e a m wi r e le s s . co m
