Tri-sector Antenna System 5176703-PACK…* 5176603-PACK…*
• Self supporting structure with a tri-sector antenna on a non-penetrating platform (bedframe) • Wideband Antennas, 2 connectors per sector • Ideal for quick roll-out on rooftop installation • 230 mm diameter antenna, 3 m total height • Variable downtilt on each sector 2°-14°
* Model number options:
5176703-PACK200 5176703-PACK20z 5176603-PACK20z
Xpol / 65° Az 1710-2170 MHz Tri-sector Antenna
see explanation next page
General Description The TRIO-PACK is a ready-to-use tri-sector system package that comes with a tri-sector antenna from our TRIO range, a mast section and a non-penetrating platform. The mast section has the same diameter as the TRIO antenna (230 mm). It is closed by a shroud with same colour as the antenna, and can be open for inside access (cabling, maintenance …). Depending on the model number option, the TRIO-PACK may include 3 UMTS2100 dual MHAs and comes with RET control on each sector. The 3 MHAs are not housed inside the mast section due to its small diameter.
DT 5350 - Ed A - page 1/3 - We reserve the rights to modify our products without prior notice.
TRIO Antenna
Mast Section
Non-Penetrating Platform
Antenna main characteristics (per sector) Frequency Band Gain Polarisation Horizontal Beamwidth (-3 dB) Vertical Beamwidth (-3 dB) Electrical Downtilt Connectors Antenna diameter / height Azimuth panning capability Sector antenna bearings
1710 - 2170 MHz 17.5 dBi ±45° 65° 7° 2° - 14° Variable 6 (2 per sector) x 7/16 DIN Female "Long Neck" 230 mm / 1.71 m no 0° / 120° / 240°
For detailed specification of the antenna, see the 5176703 datasheet The tri sector antenna can be supplied with only 1 or 2 sectors fitted with an antenna - consult us. A lightning finial is available as optional accessory (p/n: TRX-LPK)
www.jaybeamwireless.com
Tri-sector Antenna System 5176703-PACK…* 5176603-PACK…* Description of the model options
z in the model number is used to code variants as described further below.
5176703-PACK200
Delivery includes: - a tri-sector antenna type 5176703 (manual downtilt control), - a mast section, same diameter as the antenna, - a non penetrationg platform, - all the bolts and nuts needed for the assembly
5176703-PACK20z
Delivery includes: - a tri-sector antenna type 5176703 (manual downtilt control), - a mast section, same diameter as the antenna, - a non penetrationg platform, - 3 x UMTS2100 dual MHA model TTA-UM000z (stand-alone version), - all the bolts and nuts needed for the assembly.
5176603-PACK20z
This pack is identical to the above one but with RET control on each band/each sector. Delivery includes: - a tri-sector antenna type 5176603 (remote downtilt control), - a mast section, same diameter as the antenna, - a non penetrationg platform, - 3 x UMTS2100 dual MHA, model TTA-UM000z (stand-alone version), - 3 AISG cables between the MHAs and the RET modules, - All the bolts and nuts needed for the assembly.
Model number options
z in the model number is used to code the MHA Current Window Alarm compliancy to Node-B
DT 5350 - Ed A - page 2/3 - We reserve the rights to modify our products without prior notice.
Value for z A K H
Node-B vendor compliancy Alcatel-Lucent/Nortel Nokia (WMHB compatible) Huawei
MHA main characteristics Downlink (TX) Path Frequency Band Insertion Loss
2110 – 2170 MHz 0.4 dB max for type TTA-UM100z
Uplink (RX) Path Frequency Band Gain (LNA Mode) Noise Figure (LNA Mode) Bypass mode Insertion Loss, Bypass mode
1920 – 1980 MHz 12 ± 1 dB 1.1 dB typ. Yes, bypass is the default mode for each channel when not powered 3.5 dB max
Power Supply, Control and Alarms DC Supply Voltage via BTS-RF cable AISG control Current Alarm mode
+9 to +30 V DC Yes, auto-select on valid AISG1.1 frames Yes, default mode if no AISG signal is received. Alarm current values depends on the coded value for z.
For detailed specification of MHAs, see the TTA-UM000z datasheet
www.jaybeamwireless.com
Tri-sector Antenna System 5176703-PACK…* 5176603-PACK…* Supporting Structure mechanical characteristics 3 m (above roof) Total height including antenna (TOP) Bottom of RF array inside antenna
1.63 m (above roof)
Antenna connectors level
1.5 m (above roof)
Mast section - height
0.85 m
Mast section - diameter
230 mm
Dimensions on roof
3.7 m x 2.1 m (see diagram below)
Coaxial cables capacity inside the mast
6 x half-inch coaxial cables
Coaxial cables output
20 cm space without shroud at bottom of the mast
Material
platform and mast mast shroud
Hot dipped galvanized steel UV resistant platic
Operational Wind Speed
160 km/h
Survival Wind Speed
200 km/h
Stability
By additional ballast installed in the housings A, B, C. Ballast can be made of any standard concrete blocks, and must be secured to the housings by metal strap bands. A detailed installation manual is supplied with the pack. Sheets of extruded polyester (XPS) foam must be installed under the platform to protect the roof. These sheets, the needed ballast materials and the metal strap bands are not supplied with the pack.
Installation
Platform top view
3.7 m
B
DT 5350 - Ed A - page 3/3 - We reserve the rights to modify our products without prior notice.
A
2.1 m
C
www.jaybeamwireless.com
