Tri-sector Antenna System 5177703-PACK…* 5177603-PACK…*
• Self supporting structure with a tri-sector antenna on a non-penetrating platform (bedframe) • Dual Side-by-Side Wideband Antennas, 4 connectors per sector • Ideal for quick roll-out on rooftop installation • 388 mm diameter antenna, 3 m total height • Independent variable downtilt on each sector 2°-14° / 2°-14°
* Model number options:
5177703-PACK200 5177703-PACK20z 5177603-PACK20z
XXpol / 65° Az Dual 1710-2170 MHz Tri-sector Antenna
see explanation next page
General Description The TRIO-PACK is a ready-to-use tri-sector system package that comes with a tri-sector antenna from our TRIO range, a mast section and a non-penetrating platform. The mast section has the same diameter as the TRIO antenna (388 mm). It is closed by a shroud with same colour as the antenna, and can be open for inside access (cabling, maintenance …). Depending on the model number option, the TRIO-PACK may include 3 UMTS2100 dual MHAs and comes with RET control on each sector. The 3 MHAs are housed inside the mast section.
DT 5348 - Ed A - page 1/3 - We reserve the rights to modify our products without prior notice.
TRIO Antenna
Mast Section
Non-Penetrating Platform
Antenna main characteristics (per sector / each sector has 2 antennas side by side) Frequency Band 1710 - 2170 MHz 1710 - 2170 MHz Gain 17.5 dBi 17.5 dBi Polarisation ±45° ±45° Horizontal Beamwidth (-3 dB) 65° 65° Vertical Beamwidth (-3 dB) 7° 7° Electrical Downtilt 2° - 14° Variable 2° - 14° Variable Connectors 12 (4 per sector) x 7/16 DIN Female "Long Neck" Antenna diameter / height 388 mm / 1.71 m Azimuth panning capability no Sector antenna bearings 0° / 120° / 240°
For detailed specification of the antenna, see the 5177703 datasheet The tri sector antenna can be supplied with only 1 or 2 sectors fitted with an antenna - consult us. A lightning finial is available as optional accessory (p/n: TRX-LPK)
www.jaybeamwireless.com
Tri-sector Antenna System 5177703-PACK…* 5177603-PACK…* Description of the model options
DT 5348 - Ed A - page 2/3 - We reserve the rights to modify our products without prior notice.
z in the model number is used to code variants as described further below.
5177703-PACK200
Delivery includes: - a tri-sector antenna type 5177703 (manual downtilt control), - a mast section, same diameter as the antenna, - a non penetrationg platform, - all the bolts and nuts needed for the assembly
5177703-PACK20z
Delivery includes: - a tri-sector antenna type 5177703 (manual downtilt control), - a mast section, same diameter as the antenna, - a non penetrationg platform, - 3 x UMTS2100 dual MHA model TTA-UM100z - the 6 coaxial jumpers between the 3 dual MHAs and the UMTS2100 ports of each antenna sector. - all the bolts and nuts needed for the assembly. The system is equivalent to a dual wideband antenna on each sector, with separate connectors one array (at the antenna level) and for the uplink amplified UMTS2100 array (at the bottom of the MHAs).
5177603-PACK20z
This pack is identical to the above one but with RET control on each band/each sector. Delivery includes: - a tri-sector antenna type 5177603 (remote downtilt control), - a mast section, same diameter as the antenna, - a non penetrationg platform, - 3 x UMTS2100 dual MHA, model TTA-UM100z - the 6 coaxial jumpers between the 3 dual MHAs and the UMTS2100 ports of each antenna sector. - 3 AISG cables between the MHAs and the RET modules, - 3 AISG cable to daisy chain the two RET module (one per array) of each sector, - all the bolts and nuts needed for the assembly. The system is equivalent to a dual wideband antenna on each sector, with separate connectors one array (at the antenna level) and for the uplink amplified UMTS2100 array (at the bottom of the MHAs).
Model number options
z in the model number is used to code the MHA Current Window Alarm compliancy to Node-B Value for z A K H
Node-B vendor compliancy Alcatel-Lucent/Nortel Nokia (WMHB compatible) Huawei
MHA main characteristics Downlink (TX) Path Frequency Band Insertion Loss Uplink (RX) Path Frequency Band Gain (LNA Mode) Noise Figure (LNA Mode) Bypass mode Insertion Loss, Bypass mode Power Supply, Control and Alarms DC Supply Voltage via BTS-RF cable AISG control Current Alarm mode
2110 – 2170 MHz 0.4 dB max for type TTA-UM100z 1920 – 1980 MHz 12 ± 1 dB 1.1 dB typ. Yes, bypass is the default mode for each channel when not powered 3.5 dB max +9 to +30 V DC Yes, auto-select on valid AISG1.1 frames Yes, default mode if no AISG signal is received. Alarm current values depends on the coded value for z.
For detailed specification of MHAs, see the TTA-UM000z datasheet
www.jaybeamwireless.com
Tri-sector Antenna System 5177703-PACK…* 5177603-PACK…* Supporting Structure mechanical characteristics 3 m (above roof) Total height including antenna (TOP) Bottom of RF array inside antenna
1.63 m (above roof)
Antenna connectors level
1.5 m (above roof)
Mast section - height
0.85 m
Mast section - diameter
388 mm
Dimensions on roof
3.7 m x 2.1 m (see diagram below)
Coaxial cables capacity inside the mast
12 x half-inch coaxial cables
Coaxial cables output
20 cm space without shroud at bottom of the mast
Material
platform and mast mast shroud
Hot dipped galvanized steel UV resistant platic
Operational Wind Speed
160 km/h
Survival Wind Speed
200 km/h
Stability
By additional ballast installed in the housings A, B, C. Ballast can be made of any standard concrete blocks, and must be secured to the housings by metal strap bands. A detailed installation manual is supplied with the pack. Sheets of extruded polyester (XPS) foam must be installed under the platform to protect the roof. These sheets, the needed ballast materials and the metal strap bands are not supplied with the pack.
Installation
Platform top view
3.7 m
B
DT 5348 - Ed A - page 3/3 - We reserve the rights to modify our products without prior notice.
A
2.1 m
C
www.jaybeamwireless.com
