Symbol Vss Vdd Vo D/I R/W E DB0~DB7 CS1 CS2 RST Vout A K
Function Power supply(GND) Power supply(+) Contrast Adjust Command / data input Data read / write Enable signal Data bus line Chip selection driver 1 Chip selection driver 2 Reset Negative voultage output
Symbol Condition Vdd-Vss 25oC 25oC LCD driving supply voltage Vdd-Vee Input voltage 25oC Vin Item
Supply for logic voltage
Min. -0.3 -0.3 -0.3
Max. Units V 7.0 19.0 V Vdd+0.3 V
ELECTRICAL CHARACTERISTICS Item Symbol Condition Min. Typical Max. Units 25oC 5.5 Power supply voltage Vdd-Vss V 4.5 Top N W N W N W V 15.1 -20oC V 14.3 14.7 LCD operation voltage
Vop
0oC
LCM current consumption (No B/L)
Backlight current consumption
Idd
9.7
10.7
10.2
25oC
8.9 13.2 9.4 13.6 9.9
50oC
8.6
70oC
Power supply for LED B/L (+) Power supply for LED B/L ( )
H2 / H1 5.1 / 9.7 / 8.9 / 13.5
9.1 12
Vdd=5V
9.6 12.4
2.5
LED/edge VB/L=4.2V LED/array VB/L=4.2V
LCD option: STN, TN, FSTN Backlight Option: LED,EL Backlight feature, other Specs not available on catalog is under request.
4.3.3 PRO-Packing the Reserve Parachute .... Use this page to record which tools are used during the packing of your SMI, Inc. WINGS Harness/ ...... Page 110 ...
drive or network using a SQL Server interface. - Reports are generated on standard paper using Windows compatible ink-jet and laser printers. - Popular ...
5 janv. 2018 - Pair the remote control with the machine . ...... paired with the relevant floor grinder. ..... encourage segment wear (as there will be not slurry.
This Maintenance Manual describes the field maintenance methods for this Monochrome LED ...... Use the handy cleaner (service tool) to clean inside the printer. ...... SOP. First Bit of Packet. VOH (min). VIH (min). VIL (max). VOL (max). VSS.
instruction manual for additional. ' Section 2). One or .... Change information, if any, is located at the rear of this manual. SPECIAL NOTES ...... this case acts to limit the maximum capacitor charge. `" The Signal ..... 214=1840=00. 1. PIN,KNOB ..