LED Indicators. Camera. Microphone. Bracket. WiFi Pairing State. Red LED Indicator. Blinks once per second. Realtime View. Red LED Indicator. Blinks every 2 seconds. Searching for. Network. Blue LED Indicator. Constantly Blinking. Connected to a. Network. Blue LED Indicator. Solid. Privacy Mode. Red & Blue LED.
Support 32GB microSD card maximum; please do not insert the card after the camera is powered on. Note: Please format your microSD card before inserting into this slot if any file had been written in.
EN
EN
What is inside the box
Pairing Camera with WiFi through App Download the App by searching “P70 camera” from App Store or Google Play.
P70 Camera
WiFi Camera×1
AC Adapter×1
Quick guide×1
Reset Pin×1
EN
EN
Installation Important: This camera should be placed where the WiFi signal is strong for optimal performance.
Specifications Image sensor
Sony 1/2.9" CMOS sensor
Min. illumination
Color: 0.01Lux@ (F1.2, AGC ON) Black and white : 0.001Lux@ (F1.2, AGC ON)
1. Separate the mounting template on the bottom of this camera from the bracket by pressing the snap as picture shows
2. Mount the template on the wall by using the supplied screws
3. Push and press the bracket of the camera into the template carefully, and then adjust the angle to achieve best shooting effect
Shutter time
1/50s to 1/100,000s
Lens
2.4mm F2.0
Angle of view
115°
Video compression
H.264
Bit rate
Self-adaption
Max. image resolution
1920 X 1080
Frame rate
20fps (1920 X 1080)
Storage
Built-in microSD card slot, up to 32GB
Wireless standards
IEEE802.11b/g/n
Frequency range
2.412 GHz ~ 2.462 GHz
Channel bandwidth
20/40MHz Support
Operating conditions
Temperature: 0 °C - 60 °C (32 °F - 140 °F) Humidity: < 95% (non-condensing)
Power supply
DC 5V 1A
Power consumption
5W MAX
Dimensions (L x W x H)
80 x 80 x 150 mm
FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. IC RSS warning This device complies with ICDC licence-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Le rayonnement de la classe b repecte IC fixaient un environnement non contrôlés.Installation et mise en œuvre de ce matériel devrait avec échangeur distance minimale entre 20 cm ton corps.Lanceurs ou ne peuvent pas coexister cette antenne ou capteurs avec d’autres.
11 janv. 2017 - the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele
the device you want to listen to by stopping play on one device, then pressing play on the desired device. DUAL DEVICE OFF ... FACTORY RESET. Hold down MFB and Volume + Button at the same time for five seconds. CAUTION. Factory reset erases all paire
This device complies with part 15 of the FCC Rules. Operation is subject ... compliance could void the user's authority to operate the equipment. This transmitter ...
compliance could void the user's authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. [for IC]. 5150-5250MHz and 5250-5350MHz bands are restricted to indoor oper
User Manual. 5-5 Togoshi 6 Chome, Shinagawa-Ku, Tokyo 142-8511 Japan. Product Name: WLAN Complete Module. Model number: VRL4149-0601F. GENERAL. This product is a 2.4/5GHz Wireless Communication module that uses WLAN (Wireless. LAN) technology. This M
Operation is subject to the following two conditions: (1) this device may not ... Connect the equipment into an outlet on a circuit different from that to which.
Choose the Aux or S/PDIF mode. Connect one end of the included 3.5mm audio cable to the 3.5mm audio jack or the Toslink optical cable to the S/PDIF output on the BR-O2, and connect the other end of the cable to your audio output device (TV, computer,
Do not touch the product while switching the lamp on and off. Failure to do so may result in a burn. - You can check the list of compatible dimmers and transformers on the Samsung Electronics homepage or through the dealer you bought the lamp from. !
20 avr. 2017 - Information in this document is subject to change without prior notice. 2. 1. FCC & ISEDC Statement. 1.1. FCC Caution. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's au
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Expo
and relative humidity do not exceed 5 to 40È and 20 to 60%. 3) Assemble the modules within 6 months. Check the soldering ability in case of 6 months over. 3. Storage conditions. Parameter. Min. Typ. Max. Unit. Operating Temperature. 0. -. +70. È. O
For the details about this module, please refer to the specification sheet of module. ... The following information must be indicated on the host device of this ...
directly. Therefore there is no user manual of this device. The following information must be described on the user manual of the vehicle;. User Manual.
17 juin 2015 - aux lois municipales, provinciales ou fédérales. Pour en savoir plus sur la mise au rebut ... Cet appareil ne doit pas être placé dans un meuble encastré comme une bibliothèque ou une étagère, à moins que ... de la classe B, conforméme
communications. However, there is no guarantee that interfer- ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can ... the user is encouraged to try to correct
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. [for IC]. 5150-5250MHz and 5250-5350MHz bands are ...
17 juin 2015 - Do not place any sources of danger on .... find answers to frequently answered ... Note. ⢠If you press the button on the portable speaker, the portable speaker .... It may take around two hours to fully charge the ..... sheet on how
"apparel dot acceptertout brouillage radioélectrique Subi, méme sile brouillage est susceptible d'en comprometre lefonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority
User Manual. Product: PCIe Wireless Module. Model: SX-PCEAN2. For Solectria Renewables LLC integration only -- This device cannot be sold to the general public. FCC ID: 2AKA9 - SXPCEAN2. IC: 22112 - SXPCEAN2. The OEM must include the following notice
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC RSS Warning. This device complies with
comply without testing of specific absorption ratio (SAR). [for IC]. This device complies with Industry Canada's licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and. (2) This devi
Regulatory Information. USA-Federal Communications ... for compliance could void the user's authority to operate the equipment. Labeling. System integrators ...