Cylindrical High-Intensity Green LED (5 mm) OVLLG8C7 x x x x
Wide viewing angle High-brightness indicator Industry standard lead spacing Unique lens shape for flexible applications
Product Photo Here
The OVLLG8C7 is designed for superior performance in signage and lighting applications that require wide-angle, uniform light output. This device combines a high-intensity InGaN LED with a unique flat-topped T-1¾ package to provide both high brightness and a wide spatial radiation pattern. Applications x Channel letter and other signage backlighting x Decorative architectural indoor and outdoor lighting accents x Industrial and consumer indicators Part Number OVLLG8C7
Material InGaN
1 ANODE
RoHS
2 CATHODE
Emitted Color Green
Intensity Typ. mcd 670
Lens Color Water Clear
DIMENSIONS ARE IN INCHES AND [MILLIMETERS].
Moisture
DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396
[email protected] www.optekinc.com
Issue A 10/05 Page 1 of 4
Cylindrical High-Intensity Green LED (5 mm) OVLLG8C7 Absolute Maximum Ratings TA = 25o C unless otherwise noted
Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, 1KHz) Power Dissipation Lead Soldering Temperature (4mm from the base of the epoxy bulb)1 LED Junction Temperature Current Linearity vs. Ambient Temperature
-40 ~ +100° C -40 ~ +85° C 5V 20 mA 50 mA 80 mW 260° C 125° C -0.2 mA/° C
Note: 1. Solder time less than 5 seconds at temperature extreme.
Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL
PARAMETER
MIN
TYP
Iv
Luminous Intensity
415
VF
Forward Voltage
----
IR P D
2 ½H-H
MAX
UNITS
CONDITIONS
670
----
mcd
IF = 20 mA
3.4
4.0
V
IF = 20 mA
Reverse Current
----
----
50
µA
VR = 5 V
Peak Wavelength
----
521
----
nm
IF = 20 mA
Dominant Wavelength 50% Power Angle
-------
525 85
-------
nm deg
IF = 20 mA IF = 20 mA
Standard Bins (IF = 20 mA) Luminous Intensity
Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLLG8C7 may be filled with any or all bins contained as below. F5
F6
F7
810–1135
0R
580–810
0Q
415–580
0P
519
523
527
531
Luminous intensity is at 0P bin or above.
Dominant Wavelength (nm)
Forward Voltage (VF) Rank
H
J
K
L
Voltage (V)
2.6–3.0
3.0–3.3
3.3–3.6
3.6–4.0
INotes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content
