µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
D D D D D D D
KC PACKAGE (TOP VIEW)
3-Terminal Regulators Output Current Up to 500 mA No External Components High Power Dissipation Capability Internal Short-Circuit Current Limiting Output Transistor Safe-Area Compensation Direct Replacements for Fairchild µA79M00 Series
OUTPUT INPUT COMMON The input terminal is in electrical contact with the mounting base. TO-220AB
O I
description This series of fixed-negative-voltage monolithic integrated-circuit voltage regulators is designed to complement the µA78M00 series in a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. Each of these regulators can deliver up to 500 mA of output current. The internal current limiting and thermal shutdown features of these regulators make them essentially immune to overload. In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents and also as the power pass element in precision regulators.
C
KTP PACKAGE (TOP VIEW) OUTPUT INPUT COMMON The input terminal is in electrical contact with the mounting base. O
I
C
AVAILABLE OPTIONS PACKAGED DEVICES TA
0°C to 125°C
VO(nom) ( ) (V)
HEAT-SINK MOUNTED (KC)
PLASTIC FLANGE MOUNTED† (KTP)
CHIP FORM (Y)
–5
µA79M05CKC
µA79M05CKTP
µA79M05Y
–6
µA79M06CKC
µA79M06CKTP
µA79M06Y
–8
µA79M08CKC
µA79M08CKTP
µA79M08Y
– 12
µA79M12CKC
µA79M12CKTP
µA79M12Y
– 15
µA79M15CKC
µA79M15CKTP
µA79M15Y
– 20
µA79M20CKC
µA79M20CKTP
µA79M20Y
– 24
µA79M24CKC
µA79M24CKTP
µA79M24Y
† The KTP package is also available in tape and reel.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1997, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
schematic COMMON
4.5 k to 6.3 k
1.7 k to 18 k OUTPUT
0.1
0.2 INPUT Resistor values shown are nominal and in Ω.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
µA79MxxY chip information This chip, when properly assembled, displays characteristics similar to the µA79MxxC. Thermal compression or ultrasonic bonding can be used on the doped aluminum bonding pads. The chip can be mounted with conductive epoxy or a gold-silicon preform. BONDING PAD ASSIGNMENTS
(3)
COMMON
(1)
(1)
(3) µA79MxxY
OUTPUT
(2) INPUT
69
CHIP THICKNESS: 11 MILS TYPICAL BONDING PADS: 7 X 7 MILS MINIMUM TJmax = 150°C TOLERANCES ARE ± 10% ALL DIMENSIONS ARE IN MILS (2)
64
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
absolute maximum ratings over operating temperature range (unless otherwise noted)† µA79MxxC Input voltage
µA79M20, µA79M24
– 40
All others
– 35
Continuous total power dissipation (see Note 1)
UNIT V
See Dissipation Rating Tables 1 and 2
Operating free-air, TA, case, TC, or virtual junction, TJ, temperature range Storage temperature range, Tstg
0 to 150
°C
– 65 to 150
°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 °C † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: To avoid exceeding the design maximum virtual junction temperature, these ratings should not be exceeded. Due to variations in individual device electrical characteristics and thermal resistance, the built-in thermal overload protection may be activated at power levels slightly above or below the rated dissipation. DISSIPATION RATING TABLE 1–FREE-AIR TEMPERATURE PACKAGE
TA ≤ 25°C POWER RATING
DERATING FACTOR ABOVE TA = 25°C
TA = 70°C POWER RATING
TA = 125°C POWER RATING
KC
2000 mW
16.0 mW/°C
1280 mW
400 mW
KTP
1800 mW
14.5 mW/°C
1147 mW
350 mW
DISSIPATION RATING TABLE 2–CASE TEMPERATURE PACKAGE
TC ≤ 120°C POWER RATING
DERATING FACTOR ABOVE TC = 120°C
TC = 125°C POWER RATING
KC
20000 mW
200.0 mW/°C
5000 mW
KTP
18000 mW
181.1 mW/°C
4365 mW
recommended operating conditions MIN
MAX
–7
– 25
µA79M06C
–8
– 25
µA79M08C
– 10.5
– 25
µA79M12C
– 14.5
30
µA79M15C
– 17.5
– 30
µA79M20C
– 23
– 35
µA79M24C
– 27
– 38
µA79M05C
Input I p voltage, l g VI
Output current, IO Operating virtual junction temperature, TJ
4
0
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
UNIT
V
500
mA
125
°C
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
electrical characteristics at specified virtual junction temperature, VI = –10 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) TEST CONDITIONS†
PARAMETER
µA79M05C MIN – 4.8
‡ Output voltage O l
VI = – 7 V to – 25 V, TJ = 0°C to 125°C
Input voltage regulation
VI = – 7 V to – 25 V VI = – 8 V to – 18 V
pp rejection j Ripple
VI = – 8 V to – 18 V, . f = 120 Hz
Output voltage regulation Temperature coefficient of output voltage Output noise voltage
IO = 5 mA to 350 mA,
MAX
–5
– 5.2
–4.75
IO = 100 mA, TJ = 0°C to 125°C
50
IO = 300 mA
54
IO = 5 mA to 500 mA IO = 5 mA to 350 mA IO = 5 mA, f = 10 Hz to 100 kHz
TYP
– 5.25 7
50
3
30
100
mV/°C
125
µV
Bias current
V
1
Short-circuit output current
VI = – 8 V to – 18 V, TJ = 0°C to 125°C IO = 5 mA to 350 mA, TJ = 0°C to 125°C VI = – 30 V
mV
– 0.4 1.1
Bias current change
mV
dB
50
Dropout voltage
V
60 75
TJ = 0°C to 125°C
UNIT
2 0.4 0.4
140
mA mA mA
Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
electrical characteristics at specified virtual junction temperature, VI = –11 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) PARAMETER
TEST CONDITIONS†
µA79M06C MIN – 5.75
‡ Output voltage O l
VI = – 8 V to – 25 V, TJ = 0°C to 125°C
Input voltage regulation
VI = – 8 V to – 25 V VI = – 9 V to – 19 V
Ripple pp rejection j
VI = – 9 V to – 19 V, f = 120 Hz
Output voltage regulation Temperature coefficient of output voltage Output noise voltage
IO = 5 mA to 350 mA,
IO = 5 mA, f = 10 Hz to 100 kHz
50
IO = 300 mA
54
TJ = 0°C to 125°C
7
60
3
40
V
mV
dB 60 120
mV
– 0.4
mV/°C
150
µV
1.1
V
1 VI = – 9 V to – 25 V, TJ = 0°C to 125°C IO = 5 mA to 350 mA, TJ = 0°C to 125°C VI = – 30 V
UNIT
– 6.25
55
Bias current
Short-circuit output current
MAX
– 6.3
80
Dropout voltage
Bias current change
–6
– 5.7
IO = 100 mA, TJ = 0°C to 125°C
IO = 5 mA to 500 mA IO = 5 mA to 350 mA
TYP
2 0.4 0.4
140
mA mA mA
Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
electrical characteristics at specified virtual junction temperature, VI = –19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) TEST CONDITIONS†
PARAMETER
µA79M08C MIN
TYP
– 7.7 ‡ Output voltage O l
VI = – 10.5 V to – 25 V, TJ = 0°C to 125°C
Input voltage regulation
VI = – 10.5 V to – 25 V VI = – 11 V to – 21 V
pp rejection j Ripple
VI = – 11.5 V to – 21.5 V, f = 120 Hz
Output voltage regulation Temperature coefficient of output voltage
IO = 5 mA to 350 mA,
–8
IO = 100 mA, TJ = 0°C to 125°C
50
IO = 300 mA
54
IO = 5 mA, f = 10 Hz to 100 kHz
Dropout voltage
IO = 5 mA
– 8.4 8
80
4
50
mV
dB 90
160
60 TJ = 0°C to 125°C
mV
– 0.6
mV/°C
200
µV
1.1
V
1 VI = – 10.5 V to – 25 V, IO = 5 mA to 350 mA,
V
59
Bias current Bias current change
UNIT
– 8.3
– 7.6
IO = 5 mA to 500 mA IO = 5 mA to 350 mA
Output noise voltage
MAX
2
TJ = 0°C to 125°C TJ = 0°C to 125°C
0.4 0.4
mA mA
Short-circuit output current
VI = – 30 V 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
electrical characteristics at specified virtual junction temperature, VI = –19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) TEST CONDITIONS†
PARAMETER
‡ Output voltage O l
VI = – 14.5 V to – 30 V, IO = 5 mA to 350 mA, TJ = 0°C to 125°C
Input voltage regulation
VI = – 14.5 V to – 30 V VI = – 15 V to – 25 V
Ripple pp rejection j
VI = – 15V to – 25 V, f = 120 Hz
Output voltage regulation Temperature coefficient of output voltage Output noise voltage
– 11.5
– 12
– 12.5
–11.4
IO = 300 mA
54
– 12.6 9
80
5
50
mV
240
mV
– 0.8
mV/°C
300
µV
1.1
V
1.5 VI = – 14.5 V to – 30 V, TJ = 0°C to 125°C IO = 5 mA to 350 mA, TJ = 0°C to 125°C VI = – 30 V
V
dB
45 TJ = 0°C to 125°C
UNIT
60 65
Bias current
Short-circuit output current
MAX
50
Dropout voltage
Bias current change
TYP
IO = 100 mA, TJ = 0°C to 125°C
IO = 5 mA to 500 mA IO = 5 mA to 350 mA IO = 5 mA, f = 10 Hz to 100 kHz
µA79M12C MIN
3 0.4 0.4
140
mA mA mA
Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
electrical characteristics at specified virtual junction temperature, VI = –23 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) TEST CONDITIONS†
PARAMETER
µA79M15C MIN
TYP
– 14.4 ‡ Output voltage O l
VI = – 17.5 V to – 30 V, TJ = 0°C to 125°C
Input voltage regulation
VI = – 17.5 V to – 30 V VI = – 18 V to – 28 V
pp rejection j Ripple
VI = – 18.5 V to – 28.5 V, f = 120 Hz
Output voltage regulation Temperature coefficient of output voltage
IO = 5 mA to 350 mA,
IO = 100 mA, TJ = 0°C to 125°C
50
IO = 300 mA
54
IO = 5 mA to 500 mA IO = 5 mA to 350 mA
Output noise voltage
IO = 5 mA, f = 10 Hz to 100 kHz
Dropout voltage
IO = 5 mA
– 15
– 14.25
– 15.6 – 15.75
9
80
7
50
240
mV
–1
mV/°C
375
µV
1.1
V
1.5 VI = – 17.5 V to – 30 V, IO = 5 mA to 350 mA,
mV
dB
45 TJ = 0°C to 125°C
V
59 65
Bias current Bias current change
UNIT
MAX
TJ = 0°C to 125°C TJ = 0°C to 125°C
3 0.4 0.4
mA mA
Short-circuit output current
VI = – 30 V 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
electrical characteristics at specified virtual junction temperature, VI = –29 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) PARAMETER
TEST CONDITIONS†
µA79M20C MIN – 19.2
‡ Output voltage O l
VI = – 23 V to – 35 V, TJ = 0°C to 125°C
IO = 5 mA to 350 mA,
Input voltage regulation
VI = – 2 3 V t o – 3 5 V VI = – 24 V to – 34 V
Ripple pp rejection j
VI = – 24 V to – 34 V, f = 120 Hz
Output voltage regulation Temperature coefficient of output voltage Output noise voltage
IO = 5 mA, f = 10 Hz to 100 kHz
50
IO = 300 mA
54
TJ = 0°C to 125°C
12
80
10
70
V
mV
dB 58 300
mV
–1
mV/°C
500
µV
1.1
V
1.5 VI = – 23 V to – 35 V, TJ = 0°C to 125°C IO = 5 mA to 350 mA, TJ = 0°C to 125°C VI = – 30 V
UNIT
– 20.8
50
Bias current
Short-circuit output current
MAX
– 21
75
Dropout voltage
Bias current change
– 20
– 19
IO = 100 mA, TJ = 0°C to 125°C
IO = 5 mA to 500 mA IO = 5 mA to 350 mA
TYP
3.5 0.4 0.4
140
mA mA mA
Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
electrical characteristics at specified virtual junction temperature, VI = –33 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) PARAMETER
TEST CONDITIONS†
µA79M24C MIN – 23
‡ Output voltage O l
VI = – 27 V to – 38 V, TJ = 0°C to 125°C
Input voltage regulation
VI = – 27 V to – 38 V VI = – 28 V to – 38 V
pp rejection j Ripple
VI = – 28 V to – 38 V, f = 120 Hz
Output voltage regulation Temperature coefficient of output voltage Output noise voltage
IO = 5 mA to 350 mA,
IO = 5 mA, f = 10 Hz to 100 kHz
– 24
– 22.8
IO = 100 mA, TJ = 0°C to 125°C
50
IO = 300 mA
54
IO = 5 mA to 500 mA IO = 5 mA to 350 mA
TYP
12
80
12
70
300
mV
–1
mV/°C
600
µV
1.1
Bias current
1.5
Short-circuit output current
mV
dB
50
VI = – 27 V to – 38 V, TJ = 0°C to 125°C IO = 5 mA to 350 mA, TJ = 0°C to 125°C VI = – 30 V
V
58 75
TJ = 0°C to 125°C
UNIT
– 25 – 25.2
Dropout voltage
Bias current change
MAX
V 3.5 0.4 0.4
140
mA mA mA
Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
electrical characteristics at specified virtual junction temperature, VI = –10 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) PARAMETER
µA79M05Y
TEST CONDITIONS†
MIN
Output voltage‡
TYP
MAX
–5
Input voltage regulation Ripple rejection Output voltage regulation
VI = – 7 V t o – 2 5 V VI = – 8 V to – 18 V VI = – 8 V to – 18 V, IO = 5 mA to 500 mA
V
7
mV
3 IO = 300 mA,
f = 120 Hz
UNIT
60
dB
75
mV
Temperature coefficient of output voltage
IO = 5 mA to 350 mA IO = 5 mA
50 – 0.4
mV/°C
Output noise voltage
f = 10 Hz to 100 kHz
125
µV
Dropout voltage
1.1
Bias current
V
1
mA
Short-circuit output current
VI = – 30 V 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
electrical characteristics at specified virtual junction temperature, VI = –11 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) PARAMETER
µA79M06Y
TEST CONDITIONS†
MIN
Output voltage‡ Input voltage regulation Ripple rejection Output voltage regulation
TYP –6
VI = – 8 V t o – 2 5 V VI = – 9 V to – 19 V VI = – 9 V to – 19 V, IO = 5 mA to 500 mA
7 3 IO = 300 mA,
f = 120 Hz
60 80
UNIT V mV dB mV
Temperature coefficient of output voltage
IO = 5 mA to 350 mA IO = 5 mA
– 0.4
mV/°C
Output noise voltage
f = 10 Hz to 100 kHz
150
µV
Dropout voltage
55
MAX
1.1
Bias current
1
V mA
Short-circuit output current
VI = – 30 V 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
9
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
electrical characteristics at specified virtual junction temperature, VI = –19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M08Y
TEST CONDITIONS†
PARAMETER
MIN
Output voltage‡
TYP
MAX
–8
Input voltage regulation Ripple rejection Output voltage regulation
VI = – 1 0 . 5 V t o – 2 5 V VI = – 11 V to – 21 V VI = – 11.5 V to – 21.5 V, IO = 5 mA to 500 mA
V
8
mV
4
IO = 300 mA,
f = 120 Hz
UNIT
59
dB
90
mV
Temperature coefficient of output voltage
IO = 5 mA to 350 mA IO = 5 mA
60 – 0.6
mV/°C
Output noise voltage
f = 10 Hz to 100 kHz
200
µV
Dropout voltage
IO = 5 mA
1.1
Bias current
V
1
mA
Short-circuit output current
VI = – 30 V 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
electrical characteristics at specified virtual junction temperature, VI = –19 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) PARAMETER
µA79M12Y
TEST CONDITIONS†
MIN
Output voltage‡ Input voltage regulation Ripple rejection Output voltage regulation
TYP – 12
VI = – 1 4 . 5 V t o – 3 0 V VI = – 15 V to – 25 V VI = – 15V to – 25 V, IO = 5 mA to 500 mA
IO = 300 mA,
9 5 f = 120 Hz
60 65 45
MAX
UNIT V mV dB mV
Temperature coefficient of output voltage
IO = 5 mA to 350 mA IO = 5 mA
– 0.8
mV/°C
Output noise voltage
f = 10 Hz to 100 kHz
300
µV
Dropout voltage
1.1
V
Bias current
1.5
mA
Short-circuit output current
VI = – 30 V 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
10
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
electrical characteristics at specified virtual junction temperature, VI = –23 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) µA79M15Y
TEST CONDITIONS†
PARAMETER
MIN
Output voltage‡
TYP
MAX
– 15
Input voltage regulation Ripple rejection Output voltage regulation
VI = – 1 7 . 5 V t o – 3 0 V VI = – 18 V to – 28 V VI = – 18.5 V to – 28.5 V, IO = 5 mA to 500 mA
IO = 300 mA,
V
9
mV
7 f = 120 Hz
UNIT
59
dB
65
mV
Temperature coefficient of output voltage
IO = 5 mA to 350 mA IO = 5 mA
45 –1
mV/°C
Output noise voltage
f = 10 Hz to 100 kHz
375
µV
Dropout voltage
IO = 5 mA
1.1
V
1.5
mA
Bias current Short-circuit output current
VI = – 30 V 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
electrical characteristics at specified virtual junction temperature, VI = –29 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) PARAMETER
µA79M20Y
TEST CONDITIONS†
MIN
Output voltage‡ Input voltage regulation Ripple rejection Output voltage regulation
TYP – 20
VI = – 2 3 V t o – 3 5 V VI = – 24 V to – 34 V VI = – 24 V to – 34 V, IO = 5 mA to 500 mA
IO = 300 mA,
12 10 f = 120 Hz
58 75 50
MAX
UNIT V mV dB mV
Temperature coefficient of output voltage
IO = 5 mA to 350 mA IO = 5 mA
–1
mV/°C
Output noise voltage
f = 10 Hz to 100 kHz
500
µV
Dropout voltage
1.1
V
Bias current
1.5
mA
Short-circuit output current
VI = – 30 V 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
electrical characteristics at specified virtual junction temperature, VI = –33 V, IO = 350 mA, TJ = 25°C (unless otherwise noted) PARAMETER
µA79M24Y
TEST CONDITIONS†
MIN
Output voltage‡ Input voltage regulation Ripple rejection Output voltage regulation
TYP – 24
VI = – 2 7 V t o – 3 8 V VI = – 28 V to – 38 V VI = – 28 V to – 38 V, IO = 5 mA to 500 mA
Temperature coefficient of output voltage
IO = 5 mA to 350 mA IO = 5 mA,
Output noise voltage
f = 10 Hz to 100 kHz
IO = 300 mA,
12 12 f = 120 Hz
58 75 50
TJ = 0°C to 125°C
MAX
UNIT V mV dB mV
–1
mV/°C
600
µV
Dropout voltage
1.1
V
Bias current
1.5
mA
Short-circuit output current
VI = – 30 V 140 mA Peak output current 0.65 A † Pulse-testing techniques maintain TJ as close to TA as possible. Thermal effects must be taken into account separately. All characteristics are measured with a 2-µF capacitor across the input and a 1-µF capacitor across the output. ‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
12
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
MECHANICAL INFORMATION KC (R-PSFM-T3)
PLASTIC FLANGE-MOUNT PACKAGE 0.120 (3,05) 0.100 (2,54)
0.420 (10,67) 0.380 (9,65)
0.156 (3,96) DIA 0.146 (3,71)
0.185 (4,70) 0.175 (4,46)
(see Note H)
0.052 (1,32) 0.048 (1,22)
0.270 (6,86) 0.230 (5,84) (see Note H)
0.625 (15,88) 0.560 (14,22)
0.125 (3,18) (see Note C)
(see Note F)
0.250 (6,35) MAX
0.562 (14,27) 0.500 (12,70)
1 0.035 (0,89) 0.029 (0,74) 0.010 (0,25) M
3 0.070 (1,78) 0.045 (1,14)
0.122 (3,10) 0.102 (2,59) 0.025 (0,64) 0.012 (0,30)
0.100 (2,54) 0.200 (5,08)
4040207 / B 01/95 NOTES: A. B. C. D. E. F. G. H.
All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. Lead dimensions are not controlled within this area. All lead dimensions apply before solder dip. The center lead is in electrical contact with the mounting tab. The chamfer is optional. Falls within JEDEC TO-220AB Tab contour optional within these dimensions
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
µA79M00 SERIES NEGATIVE-VOLTAGE REGULATORS SLVS060C – JUNE 1976 – REVISED JANUARY 1997
MECHANICAL INFORMATION KTP (R-PSFM-T3)
PLASTIC FLANGE-MOUNT PACKAGE
0.243 (6,17) 0.233 (5,91) 0.230 (5,84) 0.220 (5,58)
0.080 (2,03) 0.070 (1,70) 0.050 (1,27) 0.040 (1,02) 0.013 (0,33) 0.007 (0,17)
0.125 (3,17) Heatsink
0.115 (2,92)
0.287 (7,29) 0.277 (7,03)
0.200 (5,08) NOM
(See Note C)
0.247 (6,27) 0.237 (6,02) 0.381 (9,68) 0.371 (9,42) 0.030 (0,76) MAX
Seating Plane
0.090 (2,29)
0.004 (0,10)
0.031(0,79) 0.025(0,63) 0.180 (4,57)
0.005(0,13) 0.001(0,02)
0.010 (0,25) M
0.002 (0,05) Top Offset 0.047 (1,19) Gage Plane
0.037 (0,94)
0.010 (0,25) 2°– 6° ā
4073388/B 01/96 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. The heatsink area is approximately 28K sq mils.
14
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage (“Critical Applications”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI products in such applications requires the written approval of an appropriate TI officer. Questions concerning potential risk applications should be directed to TI through a local SC sales office. In order to minimize risks associated with the customer’s applications, adequate design and operating safeguards should be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor does TI warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used.
Copyright 1996, Texas Instruments Incorporated