1/8â Blum Spacers. 4. B. M5 x 11MM Flat Head Euro Screws. 4. C. M5 x 14.5MM Flat Head Euro Screws. 4 ... I-SHSS-0619. Lista de partes / Liste des pièces. No.
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126
SYSTEM HOLE INSTRUCTIONS TOOLS REQUIRED:
PZ2
ESTIMATED ASSEMBLY TIME:
15 MIN
CARE AND MAINTENANCE: Clean with a damp cloth and wipe parts dry.
Parts List
A.
No.
Description
Qty
A
1/8” Blum Spacers
4
B
M5 x 11MM Flat Head Euro Screws
4
C
M5 x 14.5MM Flat Head Euro Screws
4
Frameless Side Wall Thickness
Corresponding Euro Screw
Corresponding Blum Spacer
3/4”
M5 x 11mm
N/A
5/8”
M5 x 14.5mm
1/8”
No Blum spacer and M5 x 11mm Euro Screws
B.
C.
1/8” Blum spacer and M5 x 14.5mm Euro Screws
3/4” 5/8”
WATCH TUTORIALS OF OUR PRODUCTS BEING INSTALLED
WWW.REV-A-SHELF.COM/VIDEOS
* If system holes do not line up, use the included screws in place of the Euro screws. INSTALLATION INSTRUCTIONS: SYSTEM HOLE INSTRUCTIONS
I-SHSS-0619
12400 Earl Jones Way Louisville, KY 40299 rev-a-shelf.com Customer Service: 800-626-1126
INSTRUCCIONES DE INSTALACIÓN / LES INSTRUCTIONS D’INSTALLTION INSTRUCCIONES PARA EL ORIFICIO DEL SISTEMA / INSTRUCTIONS POUR LE TROU DU SYSTÈME
HERRAMIENTAS REQUERIDAS: OUTILS REQUIS:
PZ2
Lista de partes / Liste des pièces No.
Descripción / Description
Qty
A
1/8 “ espaciadores marca Blum Cales Blum de 1/8 po Tornillos Euro cabeza plana M5 x 11 mm M5 x 11MM Vis à tête plate Euro
4
Tornillos Euro cabeza plana de 5 x 14,5 mm M5 x 14,5MM Vis à tête plate Euro
4
B C
TIEMPO ESTIMADO DE ENSAMBLADO: DUREE ESTIMÉE DE L’ASSEMBLAGE:
Grosor de pared lateral sin marco Épaisseur de la paroi latérale sans cadre
15 MIN
CUIDADO Y MANTENIMIENTO: ENTRETIEN ET MAINTENANCE:
Limpie con un paño húmedo y seque las partes. Nettoyez avec un linge humide et essuyez les piéces pour les secher complétement.
A.
4
B.
C.
Tornillo Euro correspondiente Espaciador Blum correspondiente Vis Euro correspondante Cale Blum correspondante
3/4”
M5 x 11mm
N/A
5/8”
M5 x 14.5mm
1/8”
No Espaciador Blum y tornillos Euro M5 x 11 mm Pas de cale Blum et vis M5 x 11 mm Euro
Espaciador Blum de 1/8 “y tornillos Euro M5 x 14.5mm Cale Blum 1/8 po et vis M5 x 14,5mm Euro
3/4” 5/8”
VER VIDEOS DE INSTALACIONES DE PRODUCTOS REGARDER DES VIDÉOS D’INSTALLATIONS DE PRODUITS
WWW.REV-A-SHELF.COM/VIDEOS
2
*Si no se alinean los orificios del sistema, use los tornillos incluidos en lugar de los tornillos Euro. *Si les trous du système ne sont pas alignés, utilisez les vis fournies à la place des vis Euro. INSTRUCCIONES DE INSTALACIÓN: INSTRUCCIONES PARA EL ORIFICIO DEL SISTEMA LES INSTRUCTIONS D’INSTALLTION: INSTRUCTIONS POUR LE TROU DU SYSTÈME
No. Description. Qty. A. Carbon Filter Holder. 1. B ... 12. I. Placard Stickers. 5. J. Activated Carbon Filters. 2 ... Filtros de carbón activado. / Filtre à charbon activé.
bottom of the cabinet for your bottom cam base. 2) Using the star washer screws provided, install top bracket and bottom cam base into the cabinet (See FIG 1).
of where you would like it to be mounted. Note: Look to make sure that there is no interference with the cabinet door when opening and closing. STEP 1. With the ...
Tornillos de cabeza de cruz #8 x 3/4”. Vis à tête bombée # 8 x ¾ po. 4. 12400 Earl ... tornillos traseros, retírela tirando de ella y levantándola de las correderas.
deslizantes al piso del gabinete a través de los orificios del deslizante gris del pie. ... para almacenar alimentos (FSCO por sus siglas en inglés) con los.
Step 2: Using mounting screw locations drill small pilot holes into door to prevent wood from splitting. Attach basket mount with (2) #8 x 5/8â screws. Make sure ...
surface plane et attachez les montants en fil métallique dans les trous appropriés dans le cadre (voir l'Illustration A). Una vez que ambos verticales estén.
See next page for special cutting instructions. NOTE: It's recommended you use a Finishing Saw Blade on our maple and walnut finishes in order to minimize the ...
NOTE: the hinges have slotted holes in case you need to micro-adjust sink panel left or right. NOTE: Using a screwdriver is recommended, but a drill is ...
front outside edge of cabinet. (Fig 2). Note: If installing into a cabinet with an inset door, move the slide assembly back additionally the thickness of the door. FIG.
up with front of face frame). Use a 3/8” nut driver to loosen and tighten the AMB brackets. The AMB brackets will allow for side to side door adjustment. STEP 5.
slides to REAR U-shaped support brackets with (4) machine screws (See Fig. 3). DO NOT attach lower slides to FRONT U-shaped bracket at this time! STEP 3.
Press orange release levers to disengage slides and pull slides off the unit. Presionar las palancas de liberación naranjas para desacoplar las diapositivas y ...
#8 x 5/8” Wood Screws. 14 (7 for FL). G. #8 x 1/2” Truss Head Screws. 2. H. Blum SC Slides. 2. I. Rear BLUM Brackets (FF only). 2. J. BLUM Release Triggers. 2.
STEP 7. Attach u-shaped support bracket to the cabinet floor with the mounting holes. 1-13/16” back from outside front of cabinet shown with. 3/4” wood screws.
