Spécifications Bluetooth version:3.0 Wireless transmission ... - FCC ID

⑤ When playing music (Line In or Bluetooth), tap to go to previous song, press and hold to adjust volume down. Appuyez et garder enfoncé pour régler le ...
731KB taille 3 téléchargements 48 vues
1. Technical Parameters: Spécifications Bluetooth version:3.0 Wireless transmission distance/ distance de transmission:10M Battery capacity/ capacité de la pile:400mAh 3.7V Working time(under normal volume)/ Durée de marche:2 hours Speaker spec/ transducteur:¢40mm plus Charging voltage/ Voltage de charge:5V/500mA Power / Puissance :4Ω/3W Frequency range/gamme de fréquence :120HZ-18KHZ

2. Function instruction/ Instructions de marche



Power on/off./ Marche/arrêt



Charging port (Micro USB) /entrée de charge



LINE IN/AUX Entrée auxiliaire de 3.5 MM



Mode Button (FM radio or Bluetooth or Aux), press to change the play mode.

Bouton de fonction (FM radio ou Bluetooth ou Aux), appuyiez pour changer le mode de marche.



When playing music (Line In or Bluetooth), tap to go to previous song, press and hold to adjust volume down. Appuyez et garder enfoncé pour régler le volume plus bas/cliquez pour entendre la piste précédente.



When playing music (Line In or Bluetooth), tap to go to next song or press and hold to adjust volume up. Appuyez et garder enfoncé pour régler le volume plus haut/cliquez pour entendre la piste prochaine .



When playing music (Line In or Bluetooth), tap to Play or Pause music. Under Bluetooth mode, tap to answer calls when calls come in, and then press again to hang up calls. Press for a long time to disconnect the connected Bluetooth. Cliquez pour écouter ou pauser votre musique. En Bluetooth, cliquez pour répondre aux appels et cliquez de nouveau pour décrocher. Gardez enfoncé pour détacher le Bluetooth appairage.

Connect Bluetooth: Appairage

1. First make sure Bluetooth is turned on in the settings of

your device. Activez le mode Bluetooth sur votre appareil source Audio 2. Switch the power button on the speaker to ‘On’. Mettre le bouton marche/arrêt en position de marche 3. From the Bluetooth

screen on your device look for

‘Sound Blox’ and select it. Recherchez « Sound Blox « dans la liste des appareils du menu de configuration Bluetooth de votre sources Audio. Faites votre sélection pour compléter l’appairage.

www.xtremecables.com | 877-536-8766

FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between theequipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. RF warning for Mobile device: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.