Preliminary
As of May 25, 2006
Sony Multi Program 2 Software BZS-8200
Features and Specs are subject to change
1
Sony Multi Program 2
As of May 25, 2006
Outline Current Multi Program Function
The current Multi Program function enables to make some different programs for multi language broadcasting. The background picture is the same but the different characters can be inserted.
Multi Program 2 Function
The Multi Program 2 Software splits one ME hardware. This enables to make some different background programs and also different characters can be inserted.
This function makes the Switcher ME rows double. This is effective for cost saving and space saving for the processor. (Please note there are some limitations on a split ME to be compared with a standard ME mode.)
Also one Technical Director (Switcher operator) can make several programs. This realizes an effective program production.
Features and Specs are subject to change
PRELIMINARY
2
Sony Multi Program 2
As of May 25, 2006
Outline Makes ME rows double
The Multi Program2 can make one ME rows double. By using 2ME processor units MVS-8000ASF short frame processor, the 4 ME rows system can be made. This is effective for space saving and of course cost saving. (The processor hardware is split and four keyers per ME are shared for two portions. So please note there are some limitations for both banks. Also functionality of Sub bank is less than Main bank.)
Available on MVS-8000A and MVS-8000ASF
The Multi Program 2 is realized by hardware and software. The hardware is prepared on MVS-8000A and MVS-8000ASF. By entering the software license key, this function will be available. This function is not available on MVS-8000(non-A), MVS8000SF(non-A), DVS-9000 and DVS-9000SF.
Features and Specs are subject to change
PRELIMINARY
3
Sony Multi Program 2
As of May 25, 2006
Block Diagram Comparison Current Multi Program KEY1
BKGD A BKGD B
KEY 2 KEY 3 BKGD A
KEY 1 KEY2
KEY3
KEY4
BKGD B
BKGD TRANS
PGM 1
KEY 1 PGM 2
KEY 2
BKGD A
UTIL 2
BKGD B
Multi Program 2 KEY1
BKGD A BKGD B UTIL 2 （ＰＧＭ） UTIL 3 （ＰＳＴ）
KEY 4
KEY 2 KEY 3 BKGD A
KEY 1 KEY2
KEY3
KEY4
BKGD TRANS
MAIN PGM
BKGD TRANS
SUB PGM
Features and Specs are subject to change
BKGD B KEY 2 UTIL3 (PST)
UTIL2 (PGM) KEY 4
PRELIMINARY
4
Sony Multi Program 2
As of May 25, 2006
Current Multi Program Outputs KEY 2 KEY 3 BKGD A
KEY 1
One ME circuitry BKGD A BKGD B
BKGD TRANS
KEY1
KEY2
KEY3
KEY4 BKGD B KEY 2
UTIL-2 PGM 1
BKGD A BKGD B
PGM 2
PGM 3
KEY 4
KEY 2 KEY 3 BKGD A BKGD B KEY 1
KEY 2
PGM 4 BKGD A BKGD B
Features and Specs are subject to change
KEY 4
PRELIMINARY
5
Sony Multi Program 2
As of May 25, 2006
Multi Program 2 Outputs One ME circuitry
KEY 2 KEY 3 BKGD A
KEY 1
MAIN BKGD A BKGD B
BKGD TRANS
KEY1
KEY2
KEY3
KEY4 BKGD B
SUB UTIL-2 UTIL-3
BKGD TRANS
MAIN PGM 1
KEY 1
BKGD A BKGD B
PGM 2
SUB PGM 3
KEY 2
KEY 4 KEY 2 KEY 3
UTIL3 (PST)
UTIL2 (PGM) KEY 2
PGM 4 UTIL3 (PST)
UTIL2 (PGM) KEY 4
Features and Specs are subject to change
PRELIMINARY
6
Sony Multi Program 2
Revised Info
As of May 25, 2006
Operation Example
This function is used for the following operations. (Please see the drawings later)
Set and Forget Operation
Home and Away Operation
Usually, the program picture uses Picture-in-picture effect is prepared on one ME row. During the On-Air, the re-entry of the ME program is selected on another ME row. This consumes ME row. By using Multi Program 2, one ME is split to Main bank and Sub bank. The program using Picture-in-picture can be prepared on Sub bank and you can hide the ME row behind the Main bank. You can select the prepared picture of Sub bank on the Main bank. This does not consume the ME row.
In the case of live shooting of sports games such as Baseball, there are cases two different programs are made for Home team and Away team. The main scene of Batter is common for two programs. By using Multi Program 2, you can make different shots for Home team and Away team. The transition can be linked between two programs.
Studio Monitor Feed Operation
When a monitor is placed behind a news caster in a studio, you can select inputs and make program for the monitor without sacrificing an entire ME row.
Features and Specs are subject to change
PRELIMINARY
7
Sony Multi Program 2
As of May 25, 2006
Main and Sub Delegation on the panel BLACK
1
30
SHIFT
M/E 1
M/E 2
M/E 3
XPT HOLD
KEY3
BLACK
1
30
SHIFT
M/E 1
M/E 2
M/E 3
XPT HOLD
KEY4
BLAC
CAM1
CG3V
SHFT
SHIFT
M/E1 ME1M
MAIN ENBL
MCRO SUB ASGN
BLACK
1
30
SHIFT
M/E 1
M/E 2
M/E 3
XPT HOLD
MCRO AUTO ATTCH RUN ENBL
BLACK
1
30
SHIFT
M/E 1
M/E 2
M/E 3
XPT HOLD
UTIL
MCRO
PRE MCRO
POST MCRO
Only MAIN or SUB button is turned on, only Main or SUB ME bank can be operated. When both MAIN and SUB buttons are turned on, both Main and SUB ME bank can be controlled simultaneously. PRE MACRO and POST MACRO can be assigned to PREFS button of Menu. Features and Specs are subject to change
PRELIMINARY
8
Sony Multi Program 2
Revised Info
As of May 25, 2006
Set and Forget Operation Example Set / Prepared Picture
Eagles Stadium Set on M/E1 (Standard) or M/E2-Sub(MP2)
M/E1 M/E2
Trans on M/E2(Standard) or M/E1-Main(MP2)
M/E1-Main
M/E2-Sub Re-Entry
M/E1 Re-Entry
Consume 2 rows
Can forget set row
Standard Mode
Multi Program 2 Mode
Features and Specs are subject to change
PRELIMINARY
9
Sony Multi Program 2
As of May 25, 2006
Home and Away Operation Example CAM1 Goal
CAM1 CAM2 CAM3 CAM4 ME1M
MAIN
CAM1
SUB
CAM3
CAM3 Home Team CAM1 Goal
PGM Out for Home Team CH
Team A
CAM1 CAM2 CAM3 CAM4 ME1S
MAIN
CAM1
SUB
CAM4
CAM4 Away Team
PGM Out for Away Team CH
Team B CAM1 CAM2 CAM3 CAM4 ME1M
MAIN
SUB
When both MAIN and SUB buttons are turned on, if you move the fader, both pictures of Team A and Team B are becoming bigger simultaneously. If you change the crosspoint button of CAM1 to CAM2, the background picture is changed to CAM1 to CAM2 for both Team A CH and Team B CH. 10 Features and Specs are subject to change
PRELIMINARY
Sony Multi Program 2
Revised Info
As of May 25, 2006
Home and Away Operation Example CAM1 CAM2 CAM3 CAM4
Create Main ME ME1M
CAM1
MAIN
CAM2
SUB
CAM3
CAM4
E 3-4 P
PGM Output of Main ME Eagles Win ! PGM for Eagles Channel Features and Specs are subject to change
PRELIMINARY
11
Sony Multi Program 2
Revised Info
As of May 25, 2006
Home and Away Operation Example CAM1 CAM2 CAM3 CAM4
Create Sub ME ME1S
CAM1
MAIN
SUB
CAM2
CAM3
CAM4
E 3-4 P
PGM Output of Sub ME Panthers Loose ! PGM for Panthers Channel Features and Specs are subject to change
PRELIMINARY
12
Sony Multi Program 2
Revised Info
As of May 25, 2006
Home and Away Operation Example Transition Execute Main ME and Sub ME simultaneously
CAM1 CAM2 CAM3 CAM4 ME1M
CAM1
MAIN
CAM2
E 3-4 P
SUB
CAM3
CAM4
E 3-4 P
Eagles Win !
Panthers Loose !
PGM for Eagles Channel
PGM for Panthers Channel
Features and Specs are subject to change
PRELIMINARY
13
Sony Multi Program 2
Revised Info
As of May 25, 2006
Studio Monitor Feed Operation Example
Glenn Hill
M/E1 Sub
M/E1 Main Select M/E1-Main
Make program on M/E1-Main Features and Specs are subject to change
Select M/E1-SUB
Select source for monitor on M/E1-Sub PRELIMINARY
14
Sony Multi Program 2
Revised Info
As of May 25, 2006
ME Configuration Set ME Configuration Mode can be set for each ME
Features and Specs are subject to change
PRELIMINARY
15
Sony Multi Program 2
As of May 25, 2006
Panel Configuration Main and Sub assign can be done for each ME row on the control panel
Features and Specs are subject to change
PRELIMINARY
16
Sony Multi Program 2
Revised Info
As of May 25, 2006
ME split to be double MVS-8000ASF can be used as simple 4ME row system. But please note there are some limitations. Re-entry from the same ME delays 1H.
MVS-8000ASF
M/E1 Main
1H Delay
With V5.3, the internal re-entry between Main and Sub of the same ME is not supported. The external cable connections are required.
No Re-entry with V5.3
M/E1 Sub No 1H Delay
M/E2 Main M/E2 Sub
1H Delay
Features and Specs are subject to change
No Re-entry with V5.3 PRELIMINARY
17
Sony Multi Program 2
As of May 25, 2006
Panel Configuration This configuration is OK.
Main and Sub bank of ME should be on the same panel
M/E1 Main
M/E3 Main
M/E1 Sub
M/E3 Sub
M/E2 Main
M/E4 Main
M/E2 Sub
M/E4 Sub
Can share 4ME switcher processor
Features and Specs are subject to change
PRELIMINARY
18
Sony Multi Program 2
As of May 25, 2006
Control Panel Configuration This configuration is not recommended.
Keyframe and DME sharing are a little bit confusing
M/E1 Main
M/E1 Sub
M/E2 Main
M/E2 Sub
M/E3 Main
M/E3 Sub
P/P Main
P/P Sub
Features and Specs are subject to change
PRELIMINARY
19
Sony Multi Program 2
Revised Info
As of May 25, 2006
Menu Display for Main and Sub bank
When Multi Program 2 is set for ME1, The keyer assignment is indicated.
Features and Specs are subject to change
PRELIMINARY
20
Sony Multi Program 2
Revised Info
As of May 25, 2006
Menu Display for Main and Sub bank
If the menu is different for Main and Sub, The indication for Main or Sub appears.
Features and Specs are subject to change
PRELIMINARY
21
Sony Multi Program 2
As of May 25, 2006
Main/Sub Delegation on Control Panel Main button, Sub button
Main bank, Sub bank or both banks can be delegated If a standard mode row exists on the panel, Pre Macro and Post Macro button can be used. PRE MACRO and POST MACRO can be assigned on PREFS button on the menu panel Button
Device Control
Multi Program 2
PRE MCRO / POST MCRO
-
Main / Sub
PTN LIMIT / LIMIT SET / KF
Play / Stop / Cue
Main / Sub / -
NORM / NORM/REV / REV
Play / Stop / Cue
Main / Sub / -
PRE MCRO / POST MCRO
PTN LIMIT / LIMIT SET / KF
NORM / NORM/REV / REV Features and Specs are subject to change
PRELIMINARY
22
Sony Multi Program 2
As of May 25, 2006
Main/Sub Delegation on Trans Module Key On/Off statuses are displayed no relation with Delegation of Main/Sub Key control operations are possible no relation with Delegation of Main/Sub ON 1
ON 2
ON 3
ON 4
Operations are possible relation with Delegation of Main/Sub Features and Specs are subject to change
PRELIMINARY
23
Sony Multi Program 2
As of May 25, 2006
Main/Sub Delegation The following “Yes” buttons or displays can be used for Main or Sub by delegation of Main and Sub. Button, Display
Portion
Cross point Button
DELEGATION
Key 1 Bus
No
Key 2 Bus
No
Back Ground A Bus / Util-2 Bus
Yes
Back Ground B Bus / Util-3 Bus
Yes
Source Name Display
Yes
M/E Bank Display
Yes
Key Bus XPT HOLD Button
No
Back Ground Bus XPT HOLD Button
Yes
Key Bus Selection Button (KEY3,KEY4 Button)
No
UTIL Button
No
SHIFT Button
No
Macro Button
No
Features and Specs are subject to change
PRELIMINARY
24
Sony Multi Program 2
As of May 25, 2006
Main/Sub Delegation Portion
Transition Portion
Button, Display
DELEGATION
Next Trans Selection button [BKGD]
Yes
Next Trans Selection button [KEY1] to [KEY4]
Yes
Next Trans Selection button [KEY PRIOR]
No
Next Trans Selection button [ALL]
No
Transition Type Selection Button
Yes
Transition Execution : Fader, Trans Rate Display, Transition Indicator, CUT button, AUTO TRANS Button
Yes
Wipe Direction Button
Yes
Transition Preview Button
No
Pattern Limit Button [PTN LIMIT], [LIMIT SET]
Yes
Key Status Display, Key Priority Display
Yes
Key Status On/Off Display
No
[PRIO SET] Button
No
Key Delegation Button
No
Key Transition Type Selection Button
No
Key Transition Execution Portion
No
Key Source Name Display, Key Snapshot Button
No
Key Snapshot Setting Button Features and Specs are subject to change
No PRELIMINARY
25
Sony Multi Program 2
As of May 25, 2006
Main/Sub Delegation Portion
Flexi-Pad
Button, Display
DELEGATION
Mode Selection Button
No
Bank Selection Button
No
Memory Recall Portion
Yes
UNDO Button
Yes
XPT HOLD Status Display
Yes
Number Display
Yes
Features and Specs are subject to change
PRELIMINARY
26
Sony Multi Program 2
As of May 25, 2006
ME Bank Display When Multi Program 2 is selected, at the M/E bank display on the control panel, the following letters are shown. Multi Program 2 Both Main and Sub selection
Standard, Multi Program, DSK
Only Main
Only Sub
M/E 1
ME1M
ME1S
ME1M
M/E1
M/E 2
ME2M
ME2S
ME2M
M/E2
M/E 3
ME3M
ME3S
ME3M
M/E3
P/P
PP M
PP S
PP M
P/P
Features and Specs are subject to change
PRELIMINARY
27
Sony Multi Program 2
As of May 25, 2006
Xpt Assignment Default Setting of Xpt assignment for Re-entry signals. Sub Program Out (OUT6) is added. When you push SHIFT Button and Main Re-entry signal, you can select Sub re-entry signal. Video Signal
Main No.
V5.00
V5.30
1
BLAC
BLAC
121
M/E1 OUT1
M/E1 OUT1
122
M/E2 OUT1
M/E2 OUT1
123
M/E3 OUT1
M/E3 OUT1
124
P/P OUT1
P/P OUT1
125
M/E1 OUT1
M/E1 OUT6
126
M/E2 OUT1
M/E2 OUT6
127
M/E3 OUT1
M/E3 OUT6
128
P/P OUT1
P/P OUT6
Features and Specs are subject to change
PRELIMINARY
28
Sony Multi Program 2
As of May 25, 2006
UTIL Bus Selection The UTIL 2 bus selection can be inhibited on the Setup Menu (UTIL-2 bus selection : UTIL Button + BKGD-B bus cross point button) on Multi Program 2 mode. When the ME control panel row is assigned as Sub bank and if you select the background source as UTIL-2, this operation will affect the Wipe Edge Fill of the PGM of Main. In order to prevent the miss operation, this can be inhibited. As an expansion of Multi Program, if you will not use the transition between UTIL-2 and UTIL-3 and would like to use UTIL-2 bus and UTIL-3 bus as 2 different program, UTIL-2 bus should be selected. Multi Program 2 Mode Standard Mode Main
Sub
BKGD A
UTIL-1
UITL-1
UITL-1
BKGD B
UTIL-2
Inhibit or UITL-2
Inhibit or UTIL-2
Features and Specs are subject to change
PRELIMINARY
29
Sony Multi Program 2
Revised Info
As of May 25, 2006
UTIL Bus Selection Operation for UTIL-2 can be inhibited.
Features and Specs are subject to change
PRELIMINARY
30
Sony Multi Program 2
Revised Info
As of May 25, 2006
Side Flags Side Flags can be added for both Main bank and Sub bank. To select a feed for Side Flags, the UTIL-1 bus is used. The feed to Side Flags is same for Main bank and Sub bank.
Features and Specs are subject to change
PRELIMINARY
31
Sony Multi Program 2
Revised Info
As of May 25, 2006
Output Signals from ME The following signals are generated on ME on Multi Program 2 Mode (1) PGM1 Out (Main Program Out) (2) PGM2 Out (Sub Program Out) (3) PGM3 Out (4) PGM4 Out (5) PGM1 Preview Out (Main Preview Out) (6) PGM2 Preview Out (Sub Preview Out) (7) Key Preview1 Out (8) Key Preview2 Out (9) Main Clean (10)Sub Clean (11)No Output Features and Specs are subject to change
PRELIMINARY
32
Sony Multi Program 2
Revised Info
As of May 25, 2006
ME Output Assignment Each ME has 6 Outputs. Each ME out signals can be assigned to OUT1 to OUT6. No. OUT1
Assignable Signal PGM1 Out (Fixed)
OUT2 OTU3 OUT4
PGM1 Out, PGM2 Out, PGM3 Out, PGM4 Out, PGM1 Preview Out, PGM2 Preview Out, Key Preview1 Out, Key Preview2 Out, Main Clean, Sub Clean, No Output
OUT5 OUT6
PGM2 Out (Fixed)
Features and Specs are subject to change
PRELIMINARY
33
Sony Multi Program 2
Revised Info
As of May 25, 2006
ME Output Assignment Menu Example
Features and Specs are subject to change
PRELIMINARY
34
Sony Multi Program 2
As of May 25, 2006
ME Output Default Signal The following signals are set as default. No.
Standard Mode
Multi Program 2
OUT1
PGM
PGM1 (Main Program Out)
OUT2
PVW
PGM1 Preview (Main Preview Out)
OTU3
CLEAN
PGM3
OUT4
K-PVW
Key Preview1 Out
OUT5
N/A
PGM4
OUT6
N/A
PGM2(Sub Program Out)
Features and Specs are subject to change
PRELIMINARY
35
Sony Multi Program 2
As of May 25, 2006
ME Program Configuration The following signals can be set as Back Ground The keyer can be enabled and disabled as follows. Back Ground
Main Clean, Sub Clean, BKGD A, BKGD B, UTIL-2, UTIL-3
Key
KEY1(*1), KEY2, KEY3, KEY4
The default setting is as follows, (*1) KEY1 is disabled when Sub Clean, UTIL-2 or UTIL-3 is selected as BKGD. No.
BKGD
KEY1
KEY2
KEY3
KEY4
PGM1
Main Clean
Enable
Enable
Disable
Disable
PGM2
Sub Clean
Disable (*1)
Disable
Enable
Enable
PGM3
Main Clean
Enable
Enable
Disable
Disable
PGM4
Sub Clean
Disable (*1)
Disable
Enable
Enable
Features and Specs are subject to change
PRELIMINARY
36
Sony Multi Program 2
Revised Info
As of May 25, 2006
ME Program Configuration Menu Example
Features and Specs are subject to change
PRELIMINARY
37
Sony Multi Program 2
As of May 25, 2006
Key Preview Config The following back ground signal and key signal can be assigned.
Item
Multi Program
Multi Program 2
Back Ground Signal
Clean, UTIL-2
Main Clean, Sub Clean
Selectable Keyer
KEY1 to KEY4
KEY1 for only Main, KEY2 to KEY4 for Main and Sub
Features and Specs are subject to change
PRELIMINARY
38
Sony Multi Program 2
Revised Info
As of May 25, 2006
Key Preview Config Menu Example
Features and Specs are subject to change
PRELIMINARY
39
Sony Multi Program 2
Revised Info
As of May 25, 2006
Re-entry between Main and Sub Internal Re-entry between Main bank and Sub bank is NOT possible for the same ME with V5.3 Software. For the re-entry, the external cable connection is required. Re-entry between Main bank and Sub bank for different ME has no delay.(ex. ME1 Main -> ME2 Main : No delay) Up to 4 ME rows can be re-entry-ed as well as current spec. When Snapshot/Keyframe is recalled, the selection is automatically inhibited if more than 4 ME rows are used for the effect.
Features and Specs are subject to change
PRELIMINARY
40
Sony Multi Program 2
As of May 25, 2006
Next Transition As the Next Transition, Key Priority can not be selected due to hardware configuration. Key 1 can not be selected as the Next Transition of Sub Bank. Transition Rate can be set independently for Main bank and Sub bank.
Features and Specs are subject to change
Multi Program 2 Standard Main
Sub
Key Priority
Yes
No
No
BKGD
Yes
Yes
Yes
KEY1
Yes
Yes
No
KEY2, KEY3, KEY4
Yes
Yes
Yes
PRELIMINARY
41
Sony Multi Program 2
As of May 25, 2006
Transition Parameter Bus Toggle Mode Can be set independently for Main bank and Sub bank Transition Preview Is inhibited due to hardware configuration on Multi Program 2 mode Preset Color Mix Set Up Parameter Stroke Mode and One Time Enable can be set independently for Main bank and Sub bank
Features and Specs are subject to change
PRELIMINARY
42
Sony Multi Program 2
As of May 25, 2006
Wipe Pattern The following wipe patterns can be used.
Multi Program 2 Standard
Wipe Pattern for BKGD Transition
Wipe Pattern for KEY Transition
Pattern Mix
Main
Sub
Yes, every patterns
Yes, every patterns
Standard wipe patterns only
Yes, every patterns for Common Wipe Standard wipe for Local transition
Standard wipe patterns only
Standard wipe patterns only
Yes
Yes
No
Features and Specs are subject to change
PRELIMINARY
43
Sony Multi Program 2
Revised Info
As of May 25, 2006
Wipe Pattern Example
Sub
Main
Features and Specs are subject to change
PRELIMINARY
44
Sony Multi Program 2
As of May 25, 2006
Wipe Modifier The following modifiers for wipe can be adjusted Function
Standard
Multi Program 2 Main
Sub
Matte, Util-2
Matte, Util-2(*1)
Flat Color
Fill Matte
Flat Color, Mix Color
Flat Color, Mix Color
Flat Color
Layout of Multi Pattern (BKGD)
H position, H/V Invert
H position, H/V Invert
4 selections
Layout of Multi Pattern (Key Common Transition)
H position, H/V Invert
4 selections
4 selections
Yes
Yes
No
H/V, Fringe
H/V, Fringe
No
Spring
Yes
Yes
No
Spiral
Yes
Yes
No
Edge Border Fill
Pairing Modulation
(*1) The UTIL-2 is common for Sub BKGD UTIL-2 and Wipe Edge Border Fill. If the Sub BKGD UTIL-2 is changed on Sub bank, the Wipe Edge Border Fill of Main bank is changed. Features and Specs are subject to change
PRELIMINARY
45
Sony Multi Program 2
Revised Info
As of May 25, 2006
Wipe Modifier Example (Edge)
Sub
Main
Features and Specs are subject to change
PRELIMINARY
46
Sony Multi Program 2
Revised Info
As of May 25, 2006
Wipe Modifier Example (Modify)
Sub
Main
Features and Specs are subject to change
PRELIMINARY
47
Sony Multi Program 2
As of May 25, 2006
DME Wipe For DME Wipe, please note the followings Items
Multi Program 2
Standard
Main
Sub
In case of MVS-IF(not SDI-IF), 1CH DME Wipe can be selected on Main and Sub each. In other cases, DME Wipe can be selected on one of Main or Sub.
DME Wipe Selection
Can be used at one transition per M/E
Back Ground picture for Flip/Tumble etc.
Source selected on Util-2
Main Wipe Border Color(Flat Color, Color Mix)
Sub Wipe Border Color(Flat Color)
Inhibit of DME Wipe
No
No
Inhibit can be set as Setup
Features and Specs are subject to change
PRELIMINARY
48
Sony Multi Program 2
As of May 25, 2006
DME Wipe For DME Wipe, please note the followings due to hardware configuration. DME Wipe MVS-
I/ F
SDI I/F
Standard
Multi Program 2 Main
Sub
Yes
Yes
1ch
Yes
2ch, 3ch
Yes
Only Main or Only Sub
1ch
Yes
Only Main or Only Sub
2ch, 3ch
Yes
Only Main or Only Sub
Inhibit DME Wipe on Sub bank
When Snapshot including DME Wipe is recalled for Sub bank, 2 field picture delay occurs due to system configuration. Thus the Snapshot should be recalled before On the Air. Recall can be inhibited on the Set Up menu.
Features and Specs are subject to change
PRELIMINARY
49
Sony Multi Program 2
Revised Info
As of May 25, 2006
DME Wipe Sub Inhibit
Features and Specs are subject to change
PRELIMINARY
50
Sony Multi Program 2
Revised Info
As of May 25, 2006
Keyer Assignment Four keyers are common resources for Main and Sub. Key1 is assigned only for Main. Key2,3 and 4 are assigned for Main or/and Sub. The default setting is KEY1, KEY2 : Main, KEY3, KEY4 : Sub The keyer assignment can be memorized in Snapshot and Keyframe. The operator can change the keyer assignment dynamically by using Snapshot and Keyframe. The keyer assignment can be set and confirmed on the Key Assign Menu (See next page) Show Key can be used independently for Main and Sub
Features and Specs are subject to change
PRELIMINARY
51
Sony Multi Program 2
Revised Info
As of May 25, 2006
Key Assign Menu Example
Features and Specs are subject to change
PRELIMINARY
52
Sony Multi Program 2
As of May 25, 2006
Video Process The Video Process can be adjusted for the following buses. The UTIL-3 bus is adjustable on Multi Program 2 mode.
Standard
M/E-1, M/E-2, M/E-3, PGM/PST
Multi Program 2
BKGD A/B Bus
BKGD A/B Bus
KEY 1/2/3 4 Fill Bus
KEY 1/2/3/4 Fill Bus
UTIL-1 and 2 Bus
UTIL-1/2/ 3 Bus
Features and Specs are subject to change
PRELIMINARY
53
Sony Multi Program 2
Revised Info
As of May 25, 2006
Fade To Black, Default Recall Fade To Black FTB is only one per one switcher processor Default Recall Default Recall can be done independently for Main and Sub bank. Default Recall is not effective for Keyer Assignment and PGM Config. As for the common resources of both Main and Sub, one operation on Main(Sub) will affect Sub(Main). The following functions can be done the Default Recall for Main and Sub. Wipe DME Wipe Video Process Default Recall for Sub region is not supported by V5.3 Features and Specs are subject to change
PRELIMINARY
54
Sony Multi Program 2
Revised Info
As of May 25, 2006
Snapshot and Keyframe Store and Recall Main region and Sub region are extended on Multi Program 2 mode M/E1-Main, M/E1-Sub, M/E2-Main, M/E2-Sub, M/E3-Main, M/E3-Sub, P/P-Main, P/P-Sub The Main region and Sub region can be selected on the region selection buttons at 10Key module The ME Configuration can be recalled by Snapshot and Keyframe and you can enable this capability. Store and Recall for Snapshot and Keyframe can be done independently for Main region and Sub region.
Features and Specs are subject to change
PRELIMINARY
55
Sony Multi Program 2
Revised Info
As of May 25, 2006
Regions for Snapshot and Keyframe
Features and Specs are subject to change
PRELIMINARY
56
Sony Multi Program 2
Revised Info
As of May 25, 2006
Regions for Snapshot and Keyframe
Instead of 10-Key Region, You can select region on this menu. ME1 Main and ME1 Sub can be turned on or off. This selection is effective for Keyframe/Snapshot/Shotbox Features and Specs are subject to change
PRELIMINARY
57
Sony Multi Program 2
Revised Info
As of May 25, 2006
Snapshot and Keyframe for ME Config The ME Configuration can be recalled by Snapshot and Keyframe and you can inhibit this capability.
When this button is turned on, you can recall ME Config by Snapshot and Keyframe Features and Specs are subject to change
PRELIMINARY
58
Sony Multi Program 2
As of May 25, 2006
Bus Override The Bus Override function is effective for the following buses.
M/E Main BKGD A/B Bus, M/E Sub UTIL-2, UTIL-3 bus P/P Main PGM/PST bus, P/P Sub UTIL-2, UTIL-3 bus Item
Standard
Multi Program 2
BKGD Bus
BKGD A/B
BKGD A/B BKGD UTIL-2/UTIL-3
Key Bus
KEY 1 to 4
KEY 1 to 4
Utility Bus
UTIL-1, UTIL-2
UTIL-1
Key Disable
Each Keyer
Each Keyer
Effect Dissolve Duration
BKGD A/B
Common for Main and Sub
Auto Transition
M/E Auto Trans
Independent for Main and Sub
GPI Output
Switcher GPI OUT Port 1 to 8
Switcher GPI OUT Port
XPT Hold
Features and Specs are subject to change
to 8
PRELIMINARY
59
Sony Multi Program 2
Revised Info
As of May 25, 2006
Snapshot Register The snapshots for Main bank and Sub bank are stored independently. Snapshot include DME Wipe for Sub bank is not supported by V5.3. Wipe Snapshot, DME Wipe Snapshot Wipe Snapshot and DME Wipe Snapshot can be stored independently for Main and Sub. But these are not supported for Sub bank by V5.3. Also on FlexiPad, Sub region is not supported by V5.3. Master Snapshot The snapshot data for M/E can be stored as Main Only, Sub Only or Both Main and Sub. V5.3 Support Status
Snapshot Wipe Snapshot DME Wipe Snaphot
: Main=OK, Sub=OK(DME Wipe No) : Main=OK, Sub=Not Supported : Main=OK, Sub=Not Supported
Features and Specs are subject to change
PRELIMINARY
60
Sony Multi Program 2
Revised Info
As of May 25, 2006
Snapshot Register Example V5.30
Features and Specs are subject to change
PRELIMINARY
61
Sony Multi Program 2
As of May 25, 2006
Snapshot Operation Main and Sub region on the 10-key module
Main and Sub region on the Flexi-pad
The operational region depends on Panel Config and Main/Sub Delegation button.
Region
Display
Remarks
M/E1(to 3) Main
ME1M, (ME2M, ME3M)
Replacement of M/E1(to 3) buttons
M/E1(to 3) Sub
ME1S, (ME2S, ME3S)
Addition
P/P Main
P/PM
Replacement of P/P button
P/P Sub
P/PS
Addition Operational Region
Region Selection Button
Standard
Multi Program 2
M/E1(to 3)
M/E1(to 3)
M/E1(to 3) Main
M/E1(to 3) Main
M/E1(to3)
M/E1(to 3) Main
M/E1(to 3) Sub
NA
M/E 1(to 3) Sub
Features and Specs are subject to change
PRELIMINARY
62
Sony Multi Program 2
Revised Info
As of May 25, 2006
Keyframe Operation The display of Timeline is the M/E basis. Main and Sub region are displayed independently. Run, Recall, Store and Edit of Keyframe can be operated on Main and Sub region separately. Main region and Sub region are managed as normal regions like ME1(standard) or DME1.
Features and Specs are subject to change
PRELIMINARY
63
Sony Multi Program 2
Revised Info
As of May 25, 2006
Timeline Menu Example
Keyframe for Main region and Sub region can be created/executed independently.
Features and Specs are subject to change
PRELIMINARY
64
Sony Multi Program 2
Revised Info
As of May 25, 2006
Keyframe Register Keyframe Recall, Store, Edit The effect region can be selected as Main bank and Sub bank separately as usual. The effect can be stored and edited as Main bank and Sub bank separately.
Features and Specs are subject to change
PRELIMINARY
65
Sony Multi Program 2
As of May 25, 2006
Keyer Assignment on Keyframe The following keyer assignment data are memorized in every keyframes but recalled only at the first keyframe. These are not changed during keyframe run.
M/E Config PGM Config M/E Output Assign
Features and Specs are subject to change
PRELIMINARY
66
Sony Multi Program 2
As of May 25, 2006
Master Timeline and Shotbox Master Timeline The timeline data for M/E can be stored as Main Only, Sub Only or Both Main and Sub. Shotbox The shotbox data for M/E can be stored as Main Only, Sub Only or Both Main and Sub.
Features and Specs are subject to change
PRELIMINARY
67
Sony Multi Program 2
Revised Info
As of May 25, 2006
Copy, Swap Operation M/E Copy, M/E Swap Copy and Swap are done for M/E basis as well as Standard Mode. The operation between Main and Sub is not available. The copy/swap between M/E rows that has different M/E Config is not recommended. The Copy and Swap will be done in the following groups.
Group 1 : Standard Mode Wipe Data Group 1 : Multi Program 2 Main Wipe Data Group 1 : Multi Program 2 Sub Wipe Data Group 2 : Key Wipe Data Group 3 : BKGD DME Wipe Data Group 3 : Key DME Wipe Data
Copy and Swap for Matte and Color Matte are available. Copy and Swap for Sub region are not supported by V5.3 Features and Specs are subject to change
PRELIMINARY
68
Sony Multi Program 2
As of May 25, 2006
Macro Event The following event can be used as Macro on Multi Program 2 Mode Operation Portion Crosspoint Button Module
Event Selection of BKGD A bus and BKGD B bus Auto Trans and Cut
Standard type, Compact type Transition Module
Set of Next Transition Selection of Transition type On/Off of Pattern Limit Take
Simple type
Selection of Transition type On/Off of Pattern Limit Recall of Snapshot
Flexi-Pad Module
Standard type, Simple type
10-Key Module Features and Specs are subject to change
Recall of Wipe Snapshot Recall of DME Wipe Snapshot Recall of Effect Recall of Snapshot
PRELIMINARY
69
Sony Multi Program 2
As of May 25, 2006
Macro Attachment On the Multi Program 2, if Both mode(Main and Sub) is set, the Macro can be attached on the following buttons(or fader) Block
Button or Fader Crosspoint Button on BKGD A bus
PGM/PST or M/E Crosspoint Button on BKGD B bus [PTN LIMIT] button [NORM], [NORM/REV], [REV] button [MIX], [NAM], [SUPER MIX], [PST COLOR MIX], [WIPE], [DME] button Transition Module
[AUTO TRANS] button [CUT] button Fader Lever [BKGD] button [KEY1], [KEY2], [KEY3], [KEY4] button
Features and Specs are subject to change
PRELIMINARY
70
Sony Multi Program 2
As of May 25, 2006
Internal Bus Link The following internal buses can be linked. Standard Mode
Multi Program 2 Mode
M/E-1,2,3 Program
M/E-1,2,3 Main Program
M/E-1,2,3 Utility 2
M/E-1,2,3 Sub Program
M/E-1,2,3 Preset
M/E-1,2,3 Main Preset -
M/E-1,2,3 Sub Preset
P/P Program
P/P Main Program
P/P Utility 2
P/P Sub Program
P/P Preset
P/P Main Preset -
Features and Specs are subject to change
P/P Sub Preset
PRELIMINARY
71
Sony Multi Program 2
Revised Info
As of May 25, 2006
GPI Link and ME Link GPI Link
When the operation of Crosspoint selection, Cut or Auto Transition is done, the trigger can be issued from GPI OUT port. On the Multi Program 2 mode, the GPI Link can be set independently for Main and Sub.
ME Link
The following operation can be linked independently for Main and Sub. Execution of Transition (Auto Transition, Cut, Fader operation) Selection of Next Transition Selection of Transition Type ME Link for Sub region is not supported by V5.3
External Bus Link
The following external buses can be assigned as Master Bus. M/E-1,2,3 Util-3 bus P/P Util-3 bus
Features and Specs are subject to change
PRELIMINARY
72
Sony Multi Program 2
As of May 25, 2006
Matrix Size Setting As a Matrix Size, the Standard(136x138) should be selected to use UTIL-3 buses (4 buses). Destination No Standard
Multi Program 2
70
M/E-1 Dme Key
M/E-1 Utility 3
85
M/E-2 Dme Key
M/E-2 Utility 3
100
M/E-3 Dme Key
M/E-3 Utility 3
115
P/P Dme Key
P/P Utility 3
Features and Specs are subject to change
PRELIMINARY
73
Sony Multi Program 2
As of May 25, 2006
GPI Action As for GPI Action, there are some differences between Standard mode and Multi Program 2 mode. Also there are differences for Snapshot and Keyframe
SS ? Recall Effect ? Recall Effect ? Recall & Run KF Run KF Stop KF Rewind KF Rev Run
GPIs above are available for DCU and SCU. Only Main is available for Switcher processor GPI. Features and Specs are subject to change
Standard
Cut
Multi Program 2
Remarks
Main Cut Replace
Auto Trans
Main Auto Trans
-
Sub Cut Additional
-
Sub Auto Trans
PRELIMINARY
74
Sony Multi Program 2
As of May 25, 2006
Editor Interface Via Editor A port and Editor B port, the ME1 to ME3 Main and PP Main can be controlled from Editor. Please note ME1 to ME3 Sub and PP Sub are not controlled from Editor.
Features and Specs are subject to change
PRELIMINARY
75
Sony Multi Program 2
As of May 25, 2006
FTB Module, DSK/FTB Module The following signals are selected on the module. Button
Selected Signals Un-Shift ([SHIFT] Off)
Shift ([SHIFT] On)
PST
Preset
Preset
M/E-1 to 3
M/E 1 to 3 Main Preview
M/E 1 to 3 Sub Preview
P/P
P/P Main Preview
P/P Sub Preview
M/E 1 to 3 Sub
M/E 1 to 3 Sub Preview
M/E 1 to 3 Main Preview
P/P Sub
P/P Sub Preview
P/P Main Preview
M/E 1 to 3 K
M/E 1 to 3 K-PVW1
M/E 1 to 3 K-PVW2
P/P K
P/P K-PVW1
P/P K-PVW2
M/E 1 to 3 K2
M/E 1 to 3 K-PVW2
M/E 1 to 3 K-PVW1
P/P K2
P/P K-PVW2
P/P K-PVW1
DME V
DME Monitor Video
DME Monitor Video
DME K
DME Monitor Key
DME Monitor Key
SHIFT
Un-Shift ([SHIFT] Off)
Shift ([SIHFT] On)
AUTO
AUTO
AUTO
Features and Specs are subject to change
PRELIMINARY
76
Sony Multi Program 2
Revised Info
As of May 25, 2006
Not Supported Functions by V5.3 (1) The following functions will not be supported for Sub bank by V5.3. (For Main bank, these are supported)
(a) Default Recall(Menu, CLR WORK BUFFER button) (b) Copy, Swap (c) Wipe Snapshot (d) DME Wipe Snapshot (e) ME Link
Snapshot Wipe Snapshot DME Wipe Snaphot
: Main=OK, Sub=OK(DME Wipe No) : Main=OK, Sub=Not Supported : Main=OK, Sub=Not Supported
(2) Internal Re-entry between Main and Sub
This is not supported with V5.3. For re-entry between Main and Sub of the same ME row, the external cables are required.
Features and Specs are subject to change
PRELIMINARY
77
As of May 25, 2006
Thank you very much
78
