For Product Info

Savant® Simple Host and Pro Remote Kit Quick Reference Guide Remote and Base

Box Contents (1) Savant Simple Host (SAV-CRU-0600) (1) Savant Pro Remote (SAV-CRU-0100) (1) Savant Pro Remote Base (SAV-CRU-0110) *(2) USB Power Supplies (025-0157-xx) – (HST-SIMPLEKIT-xx) *(2) USB Power Supplies (025-0162-xx) – (HST-SIMPLEKITI-xx) (2) 1.5 m USB A to micro USB B cables (064-0409-xx) (1) Quick Reference Guide (this document) *Note: The power supplies shipped differ depending on the model number ordered. See below: HST-SIMPLEKIT-xx - North America HST-SIMPLEKITI-xx - Contains Interchangeable blades for international use.

Specifications ENVIRONMENTS Temperature

32° to 104° (0° to 40° C)  

Humidity

10% to 90% (non-condensing)

DIMENSIONS

POWER BUTTON Press/Release -   Powers the remote On. Remote will take about 5-7 seconds before Savant Logo appears. -   With the remote powered on, the power button can toggle the last used A/V service on or off.

Height

Width

Depth

Weight

Remote

7.24 in (183.8 mm)

1.97 in (50.0 mm)

1.06 in (27.0 mm)

0.33 lb (148.6 g)

Remote Base

1.17 in (29.6 mm)

4.16 in (105.6 mm)

3.10 in (78.8 mm)

0.36 lb (163.4 g)

Simple Host

1.6 in (40.6 mm)

5.9 in (149.9 mm)

5.9 in (149.9 mm)

0.781 lb (354.3 g)

MICROPHONE The microphone for Voice Commands is positioned behind the small hole on top of remote.

Packaging

8.85 in (224.8 mm)

4.90 in (124.4 mm)

3.71 in (94.2 mm)

1.60 lb (725 g)

WARNING! This is not a reset button. Do not try to reset the remote by inserting a paperclip into this hole or damage will occur.

POWER Power Supplies

100/240V AC (60/50 Hz) to 5V DC

Power Input

5V DC 2A

Remote Battery

Rechargeable Lithium-Ion

TOUCHSCREEN DISPLAY Multi-colored LCD display with multiple pages for viewing and control of available services. -   Motion activated. -   One touch and swipe operation -   Controls for services VOLUME Increase or Decrease volume of the service selected on the touchscreen display (active service).

DISPLAY Touchscreen LCD

High Resolution Multi-Color LCD Display 2.57 in (65.3 mm) x 1.46 in (37.0 mm) – (H) x (W) 2.95 (74.9 mm) – Diagonal

Wi-Fi® (802.11 b/g/n 2.4 GHz)

Bluetooth

Bluetooth v4.0

Security

WPA™, WPA2™, WPA™ + WPA2™, WEP

REGULATORY Safety and Emissions

FCC Part 15

CE

C-Tick

CHANNEL Channel Up or Channel Down the service selected on the touchscreen display (active service). SCROLL/SELECT Standard up, down, left, and right arrows for on-screen control. Press and hold the up/down arrows to page up or page down the on-screen menus. Press the Select button to select the highlighted item.

STANDARDS Wireless

Press/Hold (5 sec.) – Powers remote Off.

UL

VOICE COMMANDS Activate services, scenes, environmental controls, and various other functions using voice commands. Press and hold the Voice Command button, wait for the on-screen prompt, and speak the commands clearly. TIP! Speak the phrase Voice Commands into the Remote to open a list of supported commands.

Remote

FCC ID: ASU-CRU0100 IC: 10052A-CRU0100

Remote Base:

Contains FCC ID: TLZ-CU277B Contains IC: 6100A-CU277B

REMOTE BASE Charging - Charges the battery when the Remote is set into its Base.

Simple Host

FCC ID: ASU-CRU0600 IC: 10052A-CRU0600

Wi-Fi - Communicates with the Host over the local Wi-Fi network.

RoHs

Compliant

MINIMUM SUPPORTED RELEASE

Reset Pinhole - Clears the network settings. To do this, press and hold the Reset button for five seconds until the Status LED blinks red rapidly.

Savant OS

Power Input – Connect included power supply.

da Vinci 8.3

Network Requirements Savant requires the use of a wireless network that is configured to make use of at least one of the supported wireless Standards listed in the Specifications Table. Connect all Savant devices to the same local area network (LAN) or subnet as the Host. Savant recommends not implementing any type of traffic or packet shaping in your network topology for the Savant devices as this may interfere with performance.

Bluetooth - Communicates with the Remote using Bluetooth v4.0.

Status LED – Indicates the status of the Remote Base. See the Status LED descriptions section on the back page for state information.

SIMPLE HOST

Network Configuration To ensure that the IP Address will not change due to a power outage, a static IP Address or DHCP reservation should be configured. Savant recommends using DHCP reservation within the router. By using this method, IP Addresses for all devices can be managed from a single UI, avoiding the need to access devices individually. Setting DHCP reservation varies from router to router. Refer to the documentation for the router to configure DHCP reservation.

POWER INPUT Connect the included power supply. RESET PINHOLE Clears the network settings. To do this, press and hold the Reset button for five seconds until the Status LED blinks red rapidly. STATUS LED Indicator of the state of the Simple Host. See the Status LED descriptions section on the back page for state information.

HST-SIMPLEKIT/SIMPLEKITI-00 | 009-1476-00 | 170315   Copyright © 2017 Savant Systems, LLC

45 Perseverance Way, Hyannis, MA 02601   Savant.com | 508.683.2500

Remote Base and Simple Host LED States The Status LED on the rear of the Simple Host and bottom of the Remote Base gives an indication of the state of that device. The table below lists all the states the devices can get into and what they mean. If the LED Status described below is not the same on both devices, or if the status described is relevant on only one device, the description in the table will indicate this. Off - No Power On Solid (Green) Remote Base - The Remote Base is connected to the local network and communicating with the Savant Host. Simple Host – The Host is provisioned and connected to the local network. On Solid (Yellow) – Device is rebooting. State of the LED will change once the boot is complete. Slow Blink (Yellow) - In Provisioning Mode and is ready to be added to the local network.

Rapid Blink (Yellow) - The locate feature was activated using SmartConnect. Slow Blink (Green) Remote Base Only - The Remote Base is provisioned and connected to the local network but not yet communicating with the Savant Host Rapid Blink (Red) - The reset button on the Remote Base or Simple Host has been held down for at least five seconds. When button is released, the rapid blink will stop and the device will reboot. Slow Blink Yellow/Green Remote Base Only – The firmware on the Remote Base is updating.

Installation The Simple Host and Remote should be placed on a flat surface such as a table, cabinet, or shelf. This surface should be dry, well ventilated, and out of direct sunlight. Plug the supplied power cord into a 120 – 240V AC 50/60Hz outlet receptacle. Once power is applied, the device will boot (25-30 seconds), the status LED will begin blinking yellow indicating it is in provisioning mode and needs to be added to the local network.

Placement of Remote Base The Remote Base incorporates the IR emitter diodes that transmit the IR signaling; NOT the Remote. The Remote Base contains (6) IR emitter diodes that cover a 360° swath around the base as well as (2) IR emitters that transmit the signaling vertically up from the top. The images to the right show this. Set the Remote Base in an area that is within the line of sight of any devices being controlled and not behind any furniture or similar object that can block the IR signaling. Since the Remote Base communicates with the Host via the Wi-Fi router, the Remote Base does not need to be within line of sight of the Host.

Connections / System Diagrams Both the Simple Host and Remote Base communicate in the Savant Pro System over the local Wi-Fi network. There are no wired connections required. The image below displays the Remote, Remote Base, and Simple Host and how they communicate with each other in a Savant Pro System.

Once the system is set up, refer to the Pro Remote REM-1000 Deployment Guide and Simple Host Deployment Guide located on the Savant Customer Community for provisioning and RacePoint Blueprint configuration information.

Additional Information: -   To provision the Simple Host and Pro Remote to the local network, the Savant SmartConnect application is required. Provisioning information for both products is available in their respective deployment guides. See Additional Documentation section below. -   The Pro Remote and Base need to be within 30 feet (9.14m) of each other to communicate. -   The Remote will automatically initiate a software install if it is left cradled overnight and no A/V services are active. For the update to initiate during the overnight hours, the software must be downloaded to the Remote (but not installed). -   Software updates can be initiated manually from the About page on the Pro Remote if software is loaded on the Remote, but not yet installed. An Update Now button will appear indicating the software is loaded on the Remote, but not installed. -   The Pro Remote Base receives firmware updates when a newer version is available from the Host. -   If the Simple Host requires a software upgrade, refer to the Pro Simple Host Deployment Guide. See Additional Documentation section below.

Additional Documentation Refer to the documents below for additional information on each product. -   Pro Simple Host Deployment Guide (009-1478-xx) -   Pro Remote REM-1000 Deployment Guide (009-1398-xx) -   Pro Remote User Guide (009-1410-xx) -   Pro 8 App User Guide (009-1399-xx) HST-SIMPLEKIT/SIMPLEKITI-00 | 009-1476-00 | 170315 Copyright © 2017 Savant Systems, LLC

2

of

4

45 Perseverance Way, Hyannis, MA 02601 Savant.com | 508.683.2500

FCC Regulations – Simple Host This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interferences that may cause undesired operation. This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: -   Reorient or relocate the receiving antenna. -   Increase the separation between the equipment and the receiver. -   Connect this equipment into an outlet on a circuit different from that to which the receiver is connected. -   Consult the dealer or experienced radio/TV technician for help.

FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GH band are restricted to indoor usage only.

Radiation Exposure Statement

This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.

IC Regulations This devices complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.   These devices may not cause interference, and 2.   These devices must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1.   L'appareil ne doit pas produire de brouillage, et 2.   L'utilisateur del'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. -   This Class B digital apparatus complies with Canadian ICES-003. -   Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. -   This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. -   Cet appareil est conforme à la norme RSS-310 d'Industrie Canada. L'opération est soumise à la condition que cet appareil ne provoque aucune interférence nuisible.

Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operate with minimum distance 20cm between the radiator and your body.

Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnementnon contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. -   This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/Canada. -   Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. La function de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada.

Caution 1.   The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems; 2.   The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall comply with the e.i.r.p. limit; and 3.   The maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non point-topoint operation as appropriate. 4.   Users should also be advised that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

Avertissement Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les restrictions susmentionnées, notamment: 1.   Les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux; 2.   Le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250-5350 MHz et 5470-5725 MHz doit se conformer à la limite de p.i.r.e.; 3.   Le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5725-5825 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas. 4.   De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 52505350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.

FCC Regulations – Remote This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.   This device may not cause harmful interference, and 2.   This device must accept any interference received, including interferences that may cause undesired operation. This equipment has been tested and found to comply with the limits for CLASS B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: -   Reorient or relocate the receiving antenna. -   Increase the separation between the equipment and the receiver. -   Connect this equipment into an outlet on a circuit different from that to which the receiver is connected. -   Consult the dealer or experienced radio/TV technician for help.

FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.

FCC and IC Identifier for Savant Remote This device electronically displays the FCC declaration of conformity logo as well as the FCC and IC identifier. This information can be found on the device by accessing: (main menu) à Settings à About.

Identificateur de la FCC et d’Lc pour Savant Remote Ce périphérique par voie électronique affiche le logo de déclaration de conformité FCC ainsi que l'identificateur de la FCC et d'IC. Cette information peut être trouvée sur le terminal en accédant à: (menu principal) à Settings (Paramètres)à About (A propos de).

IC Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.   This device may not cause interference, and 2.   This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1.   L'appareil ne doit pas produire de brouillage, et 2.   L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. -   This Class B digital apparatus complies with Canadian ICES-003. -   Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. -   This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference. -   Cet appareil est conforme à la norme RSS-310 d'Industrie Canada. L'opération est soumise à la condition que cet appareil ne provoque aucune interférence nuisible. -   This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/Canada. -   Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada.

HST-SIMPLEKIT/SIMPLEKITI-00 | 009-1476-00 | 170315 Copyright © 2017 Savant Systems, LLC

3

of

4

45 Perseverance Way, Hyannis, MA 02601 Savant.com | 508.683.2500

FCC Statement – Remote Base This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.   This device may not cause harmful interference, and 2.   This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -  

Reorient or relocate the receiving antenna.

-   Increase the separation between the equipment and receiver. -   Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -   Consult the dealer or an experienced radio/TV technician for help.

FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.

IC Statement – Remote Base This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1.   This device may not cause interference, and 2.   This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1.   L'appareil ne doit pas produire de brouillage, et 2.   L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,même si le brouillage est susceptible d'en compromettre le fonctionnement. -  

This Class B digital apparatus complies with Canadian ICES-003.

-  

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

-  

This device complies with RSS-310 of Industry Canada. Operation is subject to the condition that this device does not cause harmful interference.

-  

Cet appareil est conforme à la norme RSS-310 d'Industrie Canada. L'opération est soumise à la condition que cet appareil ne provoque aucune interférence nuisible.

Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Déclaration d'exposition aux radiations Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnementnon contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. -  

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/Canada.

-   Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées. La fonction de sélection de l'indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada.

HST-SIMPLEKIT/SIMPLEKITI-00 | 009-1476-00 | 170315 Copyright © 2017 Savant Systems, LLC

4

of

4

45 Perseverance Way, Hyannis, MA 02601 Savant.com | 508.683.2500