GSM TELEPHONE SGH-G600
GSM TELEPHONE
CONTENTS 1.
Safety Precautions
2.
Specification
3.
Product Function
4.
Array course control
5.
Exploded View and Part List
6.
MAIN Electrical Parts List
7.
Block Diagrams
8.
PCB Diagrams
9.
Flow Chart of Troubleshooting
10.
Reference data
11.
Disassembly and Assembly Instructions
GSPN (Global Service Partner Network) Country North America Latin America CIS Europe China Asia Mideast & Africa
Web Site service.samsungportal.com latin.samsungportal.com cis.samsungportal.com europe.samsungportal.com china.samsungportal.com asia.samsungportal.com mea.samsungportal.com
This Service Manual is a property of Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable International and/or domestic law.
ⓒ Samsung Electronics Co.,Ltd. 2007. 08 Rev.1.0
1. Safety Precautions 1-1. Repair Precaution ― Repair in Shield Box, during detailed tuning.
Take specially care of tuning or test, because the
specification of cellular phone is sensitive for surrounding interference(RF noise). ― Be careful to use a kind of magnetic object or tool, because performance of parts is damaged by the influence of magnetic force. ― Surely use a standard screwdriver when you disassemble this product, otherwise screw will be worn away. ― Use a thicken twisted wire when you measure level.
A thicken twisted wire has low resistance,
therefore error of measurement is few. ― Repair after separate Test Pack and Set because for short danger (for example an overcurrent and furious flames of parts etc) when you repair board in condition of connecting Test Pack and tuning on. ― Take specially care of soldering, because Land of PCB is small and weak in heat. ― Surely tune on/off while using AC power plug, because a repair of battery charger is dangerous when tuning ON/OFF PBA and Connector after disassembling charger. ― Don't use as you pleases after change other material than replacement registered on SEC System. Otherwise engineer in charge isn't charged with problem that you don't keep this rules.
1-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Safety Precautions
1-2. ESD(Electrostatically Sensitive Devices) Precaution Several semiconductor may be damaged easily by static electricity. Such parts are called by ESD (Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below. You can prevent from ESD damage by static electricity. ― Remove static electricity remained your body before you touch semiconductor or parts with semiconductor. There are ways that you touch an earthed place or wear static electricity prevention string on wrist. ― Use earthed soldering steel when you connect or disconnect ESD. ― Use soldering removing tool to break static electricity. , otherwise ESD will be damaged by static electricity. ― Don't unpack until you set up ESD on product. Because most of ESD are packed by box and aluminum plate to have conductive power,they are prevented from static electricity. ― You must maintain electric contact between ESD and place due to be set up until ESD is connected completely to the proper place or a circuit board.
1-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
2. Specification 2-1. GSM General Specification
G SM850 Pha se 1
G SM900 Pha se 1
EG SM 9 00 Pha se 2
DCS1800
PCS1900
Fr eq. Band[MHz] Uplin k/Down link
82 4~849 86 9~894
89 0~915 93 5~960
88 0~915 92 5~960
171 0~1785 180 5~1880
185 0~1910 193 0~1990
ARF CN ra nge
12 8~251
1 ~124
0~124 & 97 5~1023
51 2~885
51 2~810
T x/Rx spacing
4 5MHz
4 5MHz
4 5MHz
9 5MHz
8 0MHz
Mo d. Bit r ate/ Bit Period
270 .833kb ps 3. 692us
270 .833kb ps 3. 692us
270 .833kb ps 3. 692us
270 .833kb ps 3. 692us
270 .833kb ps 3. 692us
Ti me Slo t Pe rio d/Fr am e Per iod
57 6.9us 4.6 15ms
57 6.9us 4.6 15ms
57 6.9us 4.6 15ms
57 6.9us 4.6 15ms
57 6.9us 4.6 15ms
Modula tion
0. 3G MSK
0. 3G MSK
0. 3G MSK
0. 3G MSK
0. 3G MSK
MS Power
33d Bm~5dBm 33d Bm~5dBm 33d Bm~5dBm 30d Bm~0dBm 30d Bm~0dBm
Powe r Class
5pcl ~ 19pcl
5pcl ~ 19pcl
5pcl ~ 19pcl
0pcl ~ 15pcl
0pcl ~ 15pcl
Se nsitivity
-102 dBm
-102 dBm
-102 dBm
-100 dBm
-100 dBm
TDMA Mu x
8
8
8
8
8
Cell Radiu s
35Km
35Km
35Km
2Km
-
2-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Specification
2-2. GSM TX power class TX Power
GSM850
GSM900
5
33±2 dBm
33±2 dBm
6
31±2 dBm
31±2 dBm
7
29±2 dBm
29±2 dBm
8
27±2 dBm
27±2 dBm
9
25±2 dBm
25±2 dBm
10
23±2 dBm
23±2 dBm
control level
11
12
13
14
15
16
21±2 dBm
19±2 dBm
17±2 dBm
15±2 dBm
13±2 dBm
11±3 dBm
TX Power
DCS1800
PCS1900
0
30±3 dBm
30±3 dBm
1
28±3 dBm
28±3 dBm
2
26±3 dBm
26±3 dBm
3
24±3 dBm
24±3 dBm
4
22±3 dBm
22±3 dBm
5
20±3 dBm
20±3 dBm
6
18±3 dBm
18±3 dBm
7
16±3 dBm
16±3 dBm
8
14±3 dBm
14±3 dBm
9
12±4 dBm
12±4 dBm
10
10±4 dBm
10±4 dBm
11
8±4dBm
8±4dBm
12
6±4 dBm
6±4 dBm
13
4±4 dBm
4±4 dBm
control level
21±2 dBm
19±2 dBm
17±2 dBm
15±2 dBm
13±2 dBm
11±3 dBm
17
9±3dBm
9±3dBm
18
7±3 dBm
7±3 dBm
14
2±5 dBm
2±5 dBm
19
5±3 dBm
5±3 dBm
15
0±5 dBm
0±5 dBm
2-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
3. Product Function Main Function ― DC-Jack TA (700mA) ― MMS (Multimedia Message Service) ― J2ME JAVA (MIDP 2.0/CLDC 1.1) ― EMS (Enhanced Message Service) ― 64 Poly S/W MIDI ― Bluetooth 2.0 EDR ― FM Radio Support ― USB v1.2 High Speed Support ― MicroSD Card Support ― Active backlight control ― Quad band(850/900/1800/1900MHz) ― GPRS Class 10
3-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Product Function
3-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
4. Array course control 4-1. Software Adjustments
1. 2. 3. 4.
JIG Box(GH68-03306A): Download, Trace, Calibration, etc RF test cable(GH39-00283A): RF test Test cable(GH39-00838A): JIG to phone Serial cable: PC to JIG
4-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Array course control
4-2. Software Downloading 4-2-1. Downloading Binary Files • 2 binary files for downloading G600 – G600.cla – G600.tfs 4-2-2. Pre-requsite for Downloading • Downloader Program • SGH-G600 Mobile Phone • JIG BOX • Download JIG • Test Cable • Serial Cable • Binary files 4-2-3. S/W Downloader Program 1. Load the binary download program by executing
4-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Array course control
2. Select the Port, Baud Rate and Mode.
3. Select the binary files what you want to download
4-3
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Array course control
4. Press the "Start" button and connect the Handset 5. When downloading is complete, automatically the small window was showed up..
4-4
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Array course control
4-5
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
5. Exploded View and Parts List 5-1. Cellular phone Exploded View
QFR04
QFR01 QCK01
QVO01 QCR57 QFU01
QKP01
QMW01
QMI03
QME01 QMI01
QBR03 QMP01
QKP02 QVK01 QCA01
QAN02
QLC01 QME03
QME02
QSH01 QMI04
QSP01
QSD01
QPC01
QRE01
QCR05
QIF01
QRF01
QFL01
QSC13 QBA01 QCR05 QSC05
QBA00
5-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Exploded View and Parts List
5-2. Cellular phone Parts list Design LOC
Description
SEC CODE
QAN02
INTENNA-SGHG600
GH42-01290A
QBA00
PMO COVER-BATTERY
GH72-42760B
QBA01
INNER BATTERY PACK-880MAH , BL
GH43-02795A
QBR03
ASSY BRACKET-KEY
GH98-05613A
QCA01
CAMERA MODULE-5M
GH59-04643A
QCK01
PMO KEY-CAMERA
GH72-42790B
QCR05
SCREW-MACHINE
6001-001478
QCR05
SCREW-MACHINE
6001-001478
QCR57
SCREW-MACHINE
6001-002001
QFL01
ASSY CASE-SLIDE LOWER
GH98-05484B
QKP01
ASSY KEYPAD-MAIN(EU/E_BLK)
GH98-05489B
QKP02
ASSY KEYPAD-SUB(EU/E_BLK)
GH98-05488B
QLC01
MEA-LCD MODULE KIT
GH97-08026A
QME02
KEY FPCB-SUB KEY FPCB 10KEY
GH59-04700A
QME03
ASSY ETC-FLASH FPCB
GH59-04698A
QMP01
PBA MAIN-SGHG600
GH92-03873A
QPC01
MEA-FPCBKIT
GH97-08027A
QRF01
PMO COVER-RF
GH72-44462B
QSC05
RMO RUBBER-LOWER SCREW CAP
GH73-10563B
QSC13
RMO RUBBER-REAR SCREW CAP
GH73-10741B
QSH01
ICT COVER-SHIELD CAN
GH70-02732A
QSP01
UNIT-SGHG600,SPK MODULE
GH59-04704A
QVK01
KEY FPCB-VOLUME KEY
GH59-04706A
QVO01
PMO KEY-VOLUME
GH72-42793B
QME01
KEY FPCB-MAIN KEY FPCB 12 KEY
GH59-04699A
QMI01
AS-MIC SVC
GH81-06075A
QMI03
AS-SGHG600 MIC RUBBER
GH81-06836A
ASSY CASE-SLIDE UPPER
GH98-05483B
ASSY COVER-MAIN WINDOW
GH98-05487B
ASSY CASE-FRONT
GH98-05485B
ASSY DECO-FRONT
GH98-06134B
ASSY CASE-REAR
GH98-05486B
QIF01
PMO COVER-IF
GH72-42772B
QMI04
RMO RUBBER-PMIC
GH73-10901A
QSD01
PMO COVER-SD
GH72-42764B
QFU01 QMW01 QFR01 QFR04 QRE01
5-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Exploded View and Parts List
Description
SEC CODE
IC-MEMORY CARD CONNECTOR-ADAPTOR BAG PE BAG ZIPPER SCREW-MACHINE MICROPHONE-ASSY-WEP210 CBF INTERFACE-MIC CABLE(S20P,B CBF INTERFACE-DLC APCBS10BBE(S BATTERY-70MAH CORE PACK ADAPTOR-ATADS10UBE,BLK,UK S/W CD-SGH-G600 SAMSUNG PC STU KEY FPCB-SIDE KEY EARPHONE-EARPHONE,3 PLUG,BLK,E ASSY ETC-CONVERSION PLUG LABEL(P)-UNIT SEAL LABEL(P)-IMEI MANUAL-SFC LEAFLET LABEL(R)-WATER SOAK MANUAL USERS-EU ENGLISH LABEL(R)-MAIN(EU) MANUAL USERS-EU ENGLISH BOX-UNIT(UK) CUSHION-CASE(UK) PMO DECO-UPPER TOP PMO COVER-DC JACK PMO-VOL KEY V2 PMO CASE-EARPIECE RMO-EAR RUBBER 1 RMO-EAR RUBBER 4 RMO-RUBBER MIC RMO-RUBBER SCREW RMO RUBBER-CHIP MPR-CONN REMOVLA TAPE MPR-TAPE MAIN KEY SOLDERING MPR-INSU TAPE TOUCH CONN MPR-SPONGE BATT MPR-SPONGE MIC TAPE-SPK CONN TAPE-SLIDE CONN 2 TAPE ELEC TAPE ELEC TAPE INSU-SUB FPCB TAPE INSU TAPE-ABSORBER CHIP VINYL-BOHO WINDOW MAIN END SPONGE TAPE ELEC PBA MAIN-IN HOUSE ELA UNIT-WEP210, EBONY GRAY(EU ASSY CASE-UPPER ASSY CASE-LOWER
1109-001363 3719-001319 6902-000634 6902-000683 6001-001478 GH30-00312A GH39-00913A GH39-00922A GH43-02683A GH44-01756A GH46-00490A GH59-03784A GH59-04418A GH59-04444A GH68-00518B GH68-01335D GH68-04822A GH68-09361A GH68-15425A GH68-15559A GH68-15785A GH69-05703G GH69-05706A GH72-35348C GH72-35353C GH72-35354A GH72-35513C GH73-08109A GH73-08112A GH73-08425A GH73-08831A GH73-10900A GH74-04200A GH74-22250A GH74-27252A GH74-27787A GH74-27788A GH74-33771A GH74-33773A GH74-33928A GH74-33929A GH74-34636A GH74-34638A GH74-34639A GH74-34806A GH74-34853A GH74-34894A GH92-03339A GH96-02761A GH98-02765D GH98-02766C
5-3
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Exploded View and Parts List
5-4
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
6. Electrical Parts List Design LOC
Description
SEC CODE
STATUS
ANT101 ANT102 BAT400 BTC600 C100 C101 C101 C102 C102 C103 C103 C104 C104 C105 C105 C106 C106 C107 C107 C108 C108 C109 C109 C110 C110 C111 C111 C112 C112 C113 C114 C114 C115 C116 C117 C117 C118 C119 C119 C120 C120 C121 C122 C123 C123 C124 C125 C126 C127 C128 C129 C130 C131 C132 C133 C134
ANTENNA-CHIP ANTENNA-CHIP BATTERY-LI(2ND) HEADER-BATTERY C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-TA,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP
4202-001254 4202-001255 4302-001181 3711-006217 2203-000233 2203-005281 2203-006824 2203-001385 2203-006194 2203-002982 2203-005281 2203-002982 2203-005281 2203-005281 2203-005729 2203-005446 2203-006647 2203-000278 2203-006647 2203-000812 2203-006824 2203-005736 2203-006647 2203-005729 2203-005736 2203-005446 2203-006194 2203-000254 2203-005736 2404-001496 2203-000812 2203-006838 2203-001385 2203-000628 2203-005281 2203-005288 2203-002668 2203-005288 2203-006439 2203-000330 2203-006305 2203-002709 2203-006305 2203-000233 2203-006260 2203-006562 2203-006562 2203-006048 2203-006994 2203-005482 2203-002709 2203-006838 2203-000438 2203-006423 2203-006423 2203-000438
SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SNA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
6-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Electrical Parts List
Design LOC
Description
SEC CODE
STATUS
C135 C136 C137 C138 C139 C140 C200 C201 C202 C203 C204 C205 C206 C207 C208 C209 C210 C211 C212 C213 C214 C215 C216 C217 C218 C219 C220 C300 C301 C302 C303 C304 C305 C306 C307 C308 C309 C310 C312 C313 C314 C315 C316 C317 C318 C319 C320 C321 C322 C323 C324 C325 C326 C327 C400 C401
C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP
2203-000438 2203-002668 2203-006838 2203-006423 2203-000278 2203-006842 2203-005482 2203-000812 2203-005482 2203-005482 2203-005482 2203-005482 2203-005482 2203-006423 2203-005482 2203-000254 2203-005482 2203-005682 2203-006423 2203-006423 2203-006399 2203-006423 2203-006423 2203-006399 2203-006562 2203-000425 2203-000425 2203-006423 2203-006423 2203-006423 2203-006423 2203-006423 2203-006423 2203-006423 2203-006423 2203-006423 2203-006562 2203-006562 2203-006048 2203-006048 2203-006048 2203-006048 2203-006423 2203-006423 2203-006423 2203-006423 2203-006423 2203-006324 2203-006208 2203-006048 2203-006260 2203-006121 2203-000330 2203-000330 2203-006257 2203-006208
SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
6-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Electrical Parts List
Design LOC
Description
SEC CODE
STATUS
C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C412 C413 C414 C418 C419 C420 C421 C422 C423 C424 C425 C426 C427 C501 C502 C504 C505 C506 C507 C508 C509 C510 C511 C512 C514 C515 C516 C517 C519 C520 C521 C523 C524 C525 C526 C527 C600 C601 C602 C603 C604 C605 C609 C610 C612 C614
C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP
2203-006257 2203-006257 2203-006208 2203-006257 2203-006208 2203-006257 2203-006257 2203-000233 2203-000425 2203-006348 2203-006562 2203-000425 2203-005482 2203-006257 2203-006324 2203-005482 2203-006208 2203-006562 2203-006201 2203-006361 2203-006474 2203-006562 2203-006562 2203-005482 2203-005482 2203-006399 2203-006399 2203-005993 2203-006399 2203-005993 2203-006399 2203-006562 2203-006562 2203-005482 2203-005482 2203-005482 2203-000386 2203-000386 2203-005482 2203-001259 2203-005482 2203-006562 2203-006260 2203-006260 2203-006260 2203-006260 2203-000425 2203-001437 2203-001259 2203-000995 2203-001437 2203-000425 2203-006423 2203-006896 2203-005061 2203-005482
SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
6-3
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Electrical Parts List
Design LOC
Description
SEC CODE
STATUS
C615 C617 C618 C619 C620 C702 C704 C705 C706 C707 C708 C709 C710 C711 C712 C713 C714 C715 C717 C718 C719 C720 C721 C722 C723 C724 C725 C726 C728 C729 C730 C731 C732 CD700 CN100 CON101 D101 D600 D601 D602 D603 D604 D605 D700 D701 D702 D703 D704 D705 F100 F101 F101 F600 HDC700 HDC701 IFC600
C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP C-CER,CHIP CONNECTOR-CARD EDGE CONNECTOR-COAXIAL JACK-DC POWER DIODE-ZENER DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DUPLEXER-FEM FILTER-LC FILTER-LC FILTER-EMI SMD HEADER-BOARD TO BOARD HEADER-BOARD TO BOARD SOCKET-INTERFACE
2203-000254 2203-006423 2203-000233 2203-000995 2203-000679 2203-000386 2203-006562 2203-006562 2203-006399 2203-000812 2203-005682 2203-005682 2203-005682 2203-005682 2203-005682 2203-005682 2203-005682 2203-006562 2203-005682 2203-005682 2203-005682 2203-005682 2203-005682 2203-005682 2203-005682 2203-005682 2203-005682 2203-005682 2203-000812 2203-005682 2203-005682 2203-005682 2203-005682 3709-001464 3705-001358 3722-002433 0403-001547 0406-001208 0406-001208 0406-001231 0406-001231 0406-001231 0406-001203 0406-001208 0406-001208 0406-001223 0406-001223 0406-001223 0406-001223 2911-000076 2909-001279 2909-001283 2901-001408 3711-006326 3711-006593 3710-002523
SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
6-4
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Electrical Parts List
Design LOC
Description
SEC CODE
STATUS
L100 L101 L101 L102 L102 L103 L103 L104 L104 L105 L106 L107 L108 L110 L111 L112 L113 L115 L116 L117 L300 L301 L401 L500 L501 L503 L505 L506 L601 L602 L603 L605 L606 OSC100 OSC101 OSC300 OSC400 PAM500 PM400 Q100 QCR05 QCR05 QCR05 QCR57 R100 R101 R101 R102 R102 R103 R104 R104 R105 R105 R106 R106
ICT-ON-BOARD CLIP INDUCTOR-SMD ICT-ON-BOARD CLIP INDUCTOR-SMD ICT-ON-BOARD CLIP INDUCTOR-SMD ICT-ON-BOARD CLIP INDUCTOR-SMD ICT-ON-BOARD CLIP ICT-ON-BOARD CLIP INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD BEAD-SMD BEAD-SMD INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD INDUCTOR-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD BEAD-SMD INDUCTOR-SMD INDUCTOR-SMD CRYSTAL-SMD CRYSTAL-SMD CRYSTAL-SMD CRYSTAL-SMD IC-AUDIO AMP IC-POWER SUPERVISOR FET-SILICON SCREW-MACHINE SCREW-MACHINE SCREW-MACHINE SCREW-MACHINE R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP
GH70-02367A 2703-002901 GH70-02367A 2703-003095 GH70-02367A 2703-002795 GH70-02367A 2703-002649 GH70-02367A GH70-02367A 2703-002208 2703-002281 2703-002314 2703-002558 2703-002558 2703-002608 2703-002608 3301-001534 3301-001659 2703-002198 2703-002866 2703-001231 2703-002861 3301-001729 3301-001729 3301-001438 3301-001438 3301-001812 3301-001812 3301-001812 3301-001812 2703-002910 2703-001673 2801-004426 2801-004568 2801-004285 2801-004339 1201-002492 1203-004382 0505-002088 6001-001478 6001-001478 6001-001478 6001-002001 2007-000140 2007-000566 2007-008056 2007-000143 2007-009108 2007-008516 2007-000162 2007-008516 2007-000162 2007-008516 2007-007489 2007-008516
SA SNA SA SA SA SNA SA SNA SA SA SA SA SA SA SA SA SA SA SA SA SA SNA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
6-5
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Electrical Parts List
Design LOC
Description
SEC CODE
STATUS
R107 R108 R109 R110 R111 R112 R113 R115 R116 R117 R118 R119 R120 R121 R122 R123 R203 R204 R205 R206 R207 R208 R209 R210 R211 R212 R305 R307 R308 R311 R313 R316 R317 R318 R319 R322 R323 R324 R325 R326 R400 R402 R403 R408 R410 R411 R412 R413 R414 R415 R416 R417 R501 R502 R503 R504
R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP BEAD-SMD R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP
2007-001316 2007-008056 2007-000141 2007-008420 2007-008420 2007-003015 2007-008516 2007-000148 2007-008544 2007-008544 2007-000566 2007-000163 2007-003015 2007-000148 2007-000566 2007-000171 2007-000148 2007-000758 2007-009314 2007-008419 2007-008055 2007-000148 2007-001319 2007-001319 2007-008055 2007-000148 2007-008045 2007-003013 2007-003013 2007-008478 2007-001290 2007-001290 2007-009084 2007-009084 2007-008055 2007-007316 2007-000170 2007-000162 2007-007009 2007-001156 2007-007573 2007-008354 3301-001659 2007-000171 2007-001333 2007-007311 2007-000141 2007-000162 2007-002796 2007-000162 2007-000758 2007-000162 2007-008542 2007-008420 2007-008420 2007-000157
SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
6-6
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Electrical Parts List
Design LOC
Description
SEC CODE
STATUS
R507 R508 R509 R510 R511 R512 R513 R514 R515 R600 R601 R602 R603 R604 R606 R607 R608 R609 R610 R611 R612 R700 R701 R703 R704 R705 R706 R707 R708 R709 R712 R713 SIM400 TA101 TA300 TA400 TA401 TA500 TA501 TA502 TA503 TA504 TA505 TA506 TA507 TA600 TA601 U100 U101 U101 U102 U103 U104 U300 U301 U302
R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP BEAD-SMD R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP R-CHIP CONNECTOR-CARD EDGE C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP C-TA,CHIP IC-POWER AMP IC-POSI.FIXED REG. IC-DATA COMM./GEN. IC-TRANSCEIVER IC-CMOS LOGIC IC-TRANSCEIVER IC-POSI.FIXED REG. IC-DC/DC CONVERTER IC-ANALOG MULTIPLEX
2007-007528 2007-000171 2007-007528 2007-000148 2007-007528 2007-007528 2007-002796 2007-000140 2007-002796 2007-009170 2007-007107 2007-009112 2007-007741 2007-007334 2007-001333 2007-007741 2007-008800 2007-000162 2007-000162 3301-001917 2007-000148 2007-009112 2007-000159 2007-000159 2007-000159 2007-000159 2007-000157 2007-000165 2007-000166 2007-008055 2007-000143 2007-000143 3709-001447 2404-001381 2404-001381 2404-001381 2404-001225 2404-001396 2404-001396 2404-001430 2404-001226 2404-001414 2404-001225 2404-001414 2404-001225 2404-001381 2404-001381 1201-002423 1203-003688 1205-002748 1205-003093 0801-003012 1205-002942 1203-003737 1203-004548 1001-001472
SA SA SA SA SA SA SA SA SA SA SA SNA SA SA SA SA SA SA SA SA SA SNA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
6-7
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Electrical Parts List
Design LOC
Description
SEC CODE
STATUS
U401 U402 U500 U501 U503 U504 U600 U601 U700 UCD300 UCD500 UCP200 UME200 UPL200 UPL700 V601 VR101 VR102 VR103 VR104 VR105 VR106 VR107 VR110 VR600 ZD101 ZD600 ZD601 ZD602 ZD603 ZD604 ZD605
IC-POSI.FIXED REG. IC-POSI.FIXED REG. IC-POSI.FIXED REG. IC-ANALOG MULTIPLEX IC-ANALOG MULTIPLEX IC-ANALOG MULTIPLEX IC-ANALOG SWITCH IC-DEMODULATOR IC-POSI.FIXED REG. IC ASIC-SGHG600 IC-CODEC IC-COMM. CONTROLLER IC-MCP IC-CMOS LOGIC FET-SILICON VARISTOR VARISTOR VARISTOR VARISTOR VARISTOR VARISTOR VARISTOR VARISTOR VARISTOR THERMISTOR-NTC DIODE-SCHOTTKY DIODE-ZENER DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS DIODE-TVS
1203-003737 1203-003737 1203-003737 1001-001447 1001-001349 1001-001447 1001-001394 1204-002688 1203-003815 GH13-00059A 1205-003214 1205-003082 1108-000112 0801-003022 0505-002111 1405-001183 1405-001082 1405-001082 1405-001093 1405-001082 1405-001082 1405-001082 1405-001093 1405-001167 1404-001221 0404-001172 0403-001547 0406-001254 0406-001267 0406-001267 0406-001223 0406-001223
SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA
6-8
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
7. Block Diagrams 7-1. RF Solution Block Diagram
7-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Block Diagrams
7-2. BT Solution Block Diagram
7-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Block Diagrams
7-3. Base Band Solution Block Diagram MIC BB INTERFACE Serial Data Interface
RECEIVER SPEAKER
Ext. SPEAKER VIBRATOR
PCF5213EL1
Battery Type Battery Voltage
I/O Interface
Battery Temperature
A/D Interface
D1VDD D2VDD
MELODY IC (64 Poly)
D3VDD RF INTERFACE AVDD
SYSTEM CLOCK (26MHz)
AFC
VINT IOVDD
MV319DNQ
RAMP VDD_RX_TX VCC_SYN
1G OneNAND MEMORY
MIC_BIAS Li-Ion Battery (Slim,Standard)
CPVDD
PMU
SIMEN
KEY_BOARD
GPO
LCD
Charging Circuit
RTC_CLOCK (32.768KHz)
VCHG SIM CARD VSAVE
7-3
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
8. PCB Diagrams Top
8-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
PCB Diagrams
Bottom
8-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
9. Flow Chart of Troubleshooting 9-1. Power On ' Power On ' does not work Yes
Check the Battery Voltage
No Change the Battery
is more than 3.7V
Yes No Check the PMU related to VISA
C418(VISA) = 2.6V?
Yes
Check the Clock at
No Resolder OSC400
R409=32KHZ
Yes
C400(+VDD_IO_LOW) & C402(+VDD_IO_HIGH) = "H"?
No Check the related circuit
Yes
C425(+VDD_GSM_CORE)
No Check the +VDD_GSM_CORE circuit
= 1.2V?
Yes
Check the initial operation
Yes END
9-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-2. Initial
Initial Failure Yes
No
UCP200 pin C11 (RSTON) ="H"?
Check the circuit related to reset
Yes
No
UCP200 pin F1(RSTEXTn) ="H"?
change UCP200
OK?
Yes Check the 16bit data signal & memory CE Yes END
9-3
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-4
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-3. Charging Part
Abnormal charging part Yes
No
Check the PM400 pin 38
Check the circuit related to V_EXT_CHARGE
> 5.0V
Yes
No
PM400 pin 34(AUX_ON)
Check the circuit related to AUX_ON signal
= "L"?
Yes
No
Check the PM400 pin 36
Resolder or replace PM400
≒ 1.25V
Yes END
9-5
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-6
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-4. Sim Part
Phone can't access SIM Card
Yes
No SIM400 pin 1,5 = "H"?
Resolder or replace PM400
Yes
No
After Power ON, Check SIMCLK Signal on
Check the Clock
pin3 of SIM400 in a few second
Yes
No After SIM card insert, Replace PBA
SIM400 pin 2 = "H(SIM_RST)"?
Yes
Check the SIM Card
Yes
END
9-7
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-8
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-5. Microphone Part
Microphone does not work
Yes No Check the connection
Replace the MIC FPCB
from MIC FPCB
Yes
Check the circuit
No Resolder the U503, C519, C521, R509, R512
from UCP200 to MIC FPCB
Yes END
9-9
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-10
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-6. Speaker Part(Melody)
Speaker does not work
No
PAM500 pin15,17 ≒ 1.8V?
Resolder PAM500
(When PAM500 operate)
Yes No Is Speaker working?
Change the Speaker
Yes END
9-11
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-12
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-7. Key Data Input
Check Initial Operation
Yes
When one of the keys is
No Check the Dome sheet & Key Pad
pushed, is it displayed on LCD?
Yes
When one of the keys is
No Replace the Key PBA
pushed, KBIO signal is OK?
Yes
END
9-13
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-8. Back Light (for Color Main LCD)
Backlight does not work Yes
No Is LCD Contrast set on high
Set LCD Contrast on high level
level in the Menu?
Yes
No Change the Slide FPCB or LCD
Check the Slide FPCB
Yes
END
9-14
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-9. Key Back Light
Main Key LED does not work Yes No Check the key FPCB connector on PBA
Reconnect the key FPCB
Yes
IS key FPCB ok?
Change key FPCB
END
9-15
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-10. Camera part
"Camera" function does not work Yes
No
Check the Camera
Reconnect the camera module
connector on PBA
Yes
Is there another problem?
Yes
Replace the camera module
END
9-16
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-11. Radio part
Radio does not work Yes No Resolder R613
R613 ≥ 2.8V
and Check PMU part
Yes
No
R610, R612, C614, C615 ≥ 2.8V
Resolder R610, R612, C614, C615 and check U601
Yes No
L605 ≥ 2V
Check or Replace U601
Yes No
C618, C619, C620, L606 is OK? (When U601 operate)
Resolder C618, C619, C620, L606
Yes
Check UCP200 signal related to U601
Yes END
9-17
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-18
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-12. GSM Receiver
RX ON Cell Power : -60dBm
Yes No
F100 Pin11 ≥ -65dBm
Resolder CN100,C102,L109
Yes No
F100 3,4 ≥ -68dBm
No Check F100 pin10,pin14 = L
Check ANT Switch control circuit
Yes Resolder F100
Yes No U102 pin 24 ≥ -70dBm pin 25 ≥ -70dBm
Resolder C104, C105, L111
Yes
U102 pin 4,5,6,7 ≥ 0.2Vp_p
No
U102pin 11,12,16, 29,32,33,36 ≥2.8V pin10≥1.8V
No
Check & Resolder C122,C126,C128 And PMU Part
Yes
Yes
Resolder U102 Check UCP200
END
9-19
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-13. GSM Transmitter
TX ON (5Level)
Yes Yes
F100 Pin11 ≥ 30dBm
Resolder CN100,C102,L109
No Yes
F100 pin17 ≥ 30dBm
Check F100 pin14 = H (2.6V), Pin10 = L
No Check ANT Switch control circuit
Yes
No
Change or Resolder F100 Yes
U100 pin12 ≥ 30dBm
Resolder or Change C120, C121, L114
No Yes
U100 pin7 ≥ -4dBm
Check U100 pin 2,3,5,6,8, +Vbatt pin4OK?
Yes Resolder or Change U100
No
Check VBAT or PAM control signal
No
Yes U102 pin 4,5,6,7 ≥ 0.2Vp_p
U102pin 11,12,16, 29,32,33,36 ≥2.8V pin10≥1.8V
No
No
Yes
Check UCP200
END
9-20
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Check U102, C122,C126,C128
Resolder U102
Flow Chart of Troubleshooting
9-14. GSM850 Receiver
RX ON Cell Power : -60dBm
Yes No
F100 Pin11 ≥ -65dBm
Resolder CN100,C102,L109
Yes No
F100 1,2 ≥ -68dBm
No Check F100 pin10,pin14 = L
Check ANT Switch control circuit
Yes Resolder F100
Yes No U102 pin 26 ≥ -70dBm pin 25 ≥ -70dBm
Resolder C100, C103, L110
Yes
U102 pin 4,5,6,7 ≥ 0.2Vp_p
No
U102pin 11,12,16, 29,32,33,36 ≥2.8V pin10≥1.8V
No
Check & Resolder C122,C126,C128 And PMU Part
Yes
Yes
Resolder U102 Check UCP200
END
9-21
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-15. GSM850 Transmitter
TX ON (5Level)
Yes Yes
F100 Pin11 ≥ 30dBm
Resolder CN100,C102,L109
No Yes
F100 pin17 ≥ 30dBm
Check F100 pin14 = H (2.6V), Pin10 = L
No Check ANT Switch control circuit
Yes
No
Change or Resolder F100 Yes
U100 pin12 ≥ 30dBm
Resolder or Change C120, C121, L114
No Yes
U100 pin7 ≥ -4dBm
Check U100 pin 2,3,5,6,8, +Vbatt pin4OK?
Yes Resolder or Change U100
No
Check VBAT or PAM control signal
No
Yes U102 pin 4,5,6,7 ≥ 0.2Vp_p
U102pin 11,12,16, 29,32,33,36 ≥2.8V pin10≥1.8V
No
No
Yes
Check UCP200
END
9-22
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Check U102, C122,C126,C128
Resolder U102
Flow Chart of Troubleshooting
9-16. DCS Receiver
RX ON Cell Power : -60dBm
Yes No
F100 Pin11 ≥ -65dBm
Resolder CN100,C102,L109
Yes No
F100 5,6 ≥ -68dBm
No Check F100 pin10,pin14 = L
Check ANT Switch control circuit
Yes Resolder F100
Yes No U102 pin 22 ≥ -70dBm pin 23 ≥ -70dBm
Resolder C106, C108, L112
Yes
U102 pin 4,5,6,7 ≥ 0.2Vp_p
No
U102pin 11,12,16, 29,32,33,36 ≥2.8V pin10≥1.8V
No
Check & Resolder C122,C126,C128 And PMU Part
Yes
Yes
Resolder U102 Check UCP200
END
9-23
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-17. DCS Transmitter
TX ON (5Level)
Yes Yes
F100 Pin11 ≥ 25dBm
Resolder CN100,C102,L109
No Yes
F100 pin15 ≥ 25dBm
Check F100 pin14 = L (2.6V), Pin10 = H
No Check ANT Switch control circuit
Yes
No
Change or Resolder F100 Yes
U100 pin18 ≥ 25dBm
Resolder or Change C116, C117, C118
No Yes
U100 pin1 ≥ -4dBm
Check U100 pin 2,3,5,6,8, +Vbatt pin4OK?
Yes Resolder or Change U100
No
Check VBAT or PAM control signal
No
Yes U102 pin 4,5,6,7 ≥ 0.2Vp_p
U102pin 11,12,16, 29,32,33,36 ≥2.8V pin10≥1.8V
No
No
Yes
Check UCP200
END
9-24
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Check U102, C122,C126,C128
Resolder U102
Flow Chart of Troubleshooting
9-18. PCS Receiver
RX ON Cell Power : -60dBm
Yes No
F100 Pin11 ≥ -65dBm
Resolder CN100,C102,L109
Yes No
F100 7,8 ≥ -68dBm
No Check F100 pin10,pin14 = L
Check ANT Switch control circuit
Yes Resolder F100
Yes No U102 pin 20 ≥ -70dBm pin 21 ≥ -70dBm
Resolder C113, C119, L113
Yes
U102 pin 4,5,6,7 ≥ 0.2Vp_p
No
U102pin 11,12,16, 29,32,33,36 ≥2.8V pin10≥1.8V
No
Check & Resolder C122,C126,C128 And PMU Part
Yes
Yes
Resolder U102 Check UCP200
END
9-25
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-19. PCS Transmitter
TX ON (5Level)
Yes Yes
F100 Pin11 ≥ 25dBm
Resolder CN100,C102,L109
No Yes
F100 pin15 ≥ 25dBm
Check F100 pin14 = L (2.6V), Pin10 = H
No Check ANT Switch control circuit
Yes
No
Change or Resolder F100 Yes
U100 pin18 ≥ 25dBm
Resolder or Change C116, C117, C118
No Yes
U100 pin1 ≥ -4dBm
Check U100 pin 2,3,5,6,8, +Vbatt pin4OK?
Yes Resolder or Change U100
No
Check VBAT or PAM control signal
No
Yes U102 pin 4,5,6,7 ≥ 0.2Vp_p
U102pin 11,12,16, 29,32,33,36 ≥2.8V pin10≥1.8V
No
No
Yes
Check UCP200
END
9-26
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Check U102, C122,C126,C128
Resolder U102
Flow Chart of Troubleshooting
9-27
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-20. Bluetooth part
Bluetooth does not work Yes No Resolder or replace
F500 pin 2 ≥ -4dB
C137, L117, ANT102
Yes
No
C132, C133 (+position), is ≥ 1.8V
Resolder C132, C133 and check the PMU part
Yes No Resolder C130,C131,C135,C136 check or Replace U503
C130,C131,C135,C136 is ≥ 1.5V
Yes
No
TP_BT_POEWR ≥1.8V Pin A5 ≥ 1.7V(32kHz)
check TP_BT_POEWR check or Replace U503
Yes
Check UCP200
Yes END
9-28
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-29
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Flow Chart of Troubleshooting
9-30
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
10. Reference data Reference Abbreviate ― AAC: Advanced Audio Coding. ― AVC : Advanced Video Coding. ― BER : Bit Error Rate ― BPSK: Binary Phase Shift Keying ― CA : Conditional Access ― CDM : Code Division Multiplexing ― C/I : Carrier to Interference ― DMB : Digital Multimedia Broadcasting ― EN : European Standard ― ES : Elementary Stream ― ETSI: European Telecommunications Standards Institute ― MPEG: Moving Picture Experts Group ― PN : Pseudo-random Noise ― PS : Pilot Symbol ― QPSK: Quadrature Phase Shift Keying ― RS : Reed-Solomon ― SI : Service Information ― TDM : Time Division Multiplexing ― TS : Transport Stream
10-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Reference data
10-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
11. Disassembly and Assembly Instructions 11-1. Disassembly Instructions 1
2
1) Unscrew 6points from the rear case
1) Disjoint from low side to up side of rear case.
2) Open the IF COVER
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
3
1) Remove the volume key and camera key. 2) Disconnect the 3X4 key connecter.
1) Be careful not to make scratch and molding damage!
11-1
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
4
5
1) Lift B'd up and Disconnect the slide
1) Disjoint the key bracket from front case.
FPCB connecter.
1) Be careful not to make scratch and molding damage! 2) Be careful not to make the FPCB damage!
1) Be careful not to make scratch and molding damage!
7
6
1) Slide up and Remove the keypad .
1) Unscrew 6 points from the front case.
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
11-2
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
8
9 1) Remove the screw rubbers.
1) Disjoint the front case as below picture.
1) Be careful not to make scratch and molding damage! 2) Be careful not to make the FPCB damage!
1) Be careful not to make scratch and molding damage!
10
11 1) Unscrew 4 points from the lower case.
1) Remove the tape between FPCB and lower.
1) Be careful not to make scratch and molding damage! 2) Be careful not to make the FPCB damage!
1) Be careful not to make scratch and molding damage!
11-3
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
12
13
1) After disjoint the hooker of the lower
1) Disjoint the hooker of the LCD as below the picture.
side, disassemble the LOWER case as below the picture.
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
2) Be careful not to make the FPCB damage!
2) Be careful not to make the camera FPCB damage!
14
1) Disassemble the upper case as below the picture.
1) Be careful not to make scratch and molding damage!
11-4
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
11-2. Assembly Instructions
1
1) Insert the camera FPCB into connector.
2
1) Be careful not to make scratch and molding damage! 2) Be careful not to make the camera FPCB damage!
3
1) Insert the slide FPCB into connector.
1) Be careful not to make scratch and molding damage! 2) Be careful not to make the FPCB damage! 3) Be careful make right side of FPCB.
1) Insert sub key FPCB into connector.
4
1) Attach tape to the slide connector. 2) Attach tape to FPCB. (Guide line)
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
11-5
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
5
1) Insert the speaker module and flash kit.
1) Be careful not to make scratch and molding damage!
7
6
1) Attach tape to the connector.
1) Be careful not to make the FPCB damage!
1) Put the Speaker and Camera to the Upper
8
case
1) Joint the lower hooks.
2) Joint the LCD hooks 3) Insert the sub key into guide holes.
1) Be careful not to make scratch and molding damage! 2) Be careful not to disconnect the speaker
1) Be careful not to make scratch and molding damage!
11-6
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
9
10 1) Fold slide FPCB together
1) Screw 4 points on Lower assy'.
2) Attach slide to the lower guide holes.
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage!
2) TORQE
2) Be careful not to make the FPCB damage!
11
(1.1 ± 0.1 Kgf·Cm)
1) Insert the 2 points screw rubbers
12
1) Insert the FPCB into front FPCB hole. 2) Inset front holes into lower hooks.
into the lower case
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage! 2) Be careful not to make the FPCB damage!
11-7
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
13
14 1) Let a key pad on front ass'y.
1) Screw 4 points on front ass'y.
1) Be careful not to make scratch and molding damage!. 2) TORQE (1.1 ± 0.1 Kgf·Cm)
1) Be careful not to make scratch and molding damage!
15
16
1) Lock 3X4 bracket to front ass'y.
1) Insert the slide connect to slide FPCB
2) Let a mic rubber on mic.
horizontally.
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage! 2) Be careful not to make the FPCB damage!
11-8
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
17
18
1) Attach the volume key FPCB and camera key
1) Put the volume key and camera key to the
FPCB to the front ass'y, right side slightly.
front ass'y, right side slightly.
2) Insert 3X4 key FPCB into B'd connector
1) Be careful not to make scratch and molding damage!.
1) Be careful not to make scratch and molding damage!
20
19
1) Screw 6 points.
1) Assemble the rear case.
1) Be careful not to make scratch and molding damage!
1) Be careful not to make scratch and molding damage! 2) TORQE (1.1 ± 0.1 Kgf·Cm).
11-9
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
11-10
SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization
