2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
96 05 19 REMOVING AND INSTALLING DOOR CONTACT SWITCH - AS OF MY 2003 (ALL MODELS) PRELIMINARY WORK Preliminary work
1. Remove door lock. Refer to 57 17 19 Removing and installing door lock - as of MY 2003 (All Models) . REMOVING DOOR CONTACT SWITCH Installation Location:
Microsoft Wednesday, September 16, 2009 5:32:18 5:32:13 PM
Page 1
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 1: Overview of door contact switch Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 2
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 2: Removing holder and plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Unscrew fastening screw -arrow 1- and pull the holder and plug upwards -arrow- . See Fig. 2.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 3
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 3: Removing plug and releasing lead Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Pull the plug out of the holder -arrow A- . See Fig. 3. 3. Disengage lead from the holder -arrow B- and remove upwards -arrow C- . See Fig. 3.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 4
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 4: Removing door contact switch Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Lever out fastening clip with a suitable screwdriver -arrow A- and remove the clip and the door contact switch -arrow B- . See Fig. 4. INSTALLING DOOR CONTACT SWITCH
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 5
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 5: Installing door contact switch Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Install door contact switch in the locking bores -arrow A- and fasten it to the door lock with the fastening clip -arrow B- . See Fig. 5.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 6
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 6: Inserting plug and securing lead Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Press plug into the holder -arrow A- until it clicks into place. See Fig. 6. 3. Insert electrical wire -arrow B- and lay it in the guide -arrow C- . See Fig. 6.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 7
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 7: Installing holder and plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Insert the holder and plug into the door lock -arrow- and tighten with the fastening screw -1- . See Fig. 7. SUBSEQUENT WORK Subsequent work
1. Install door lock. Refer to 57 17 19 Removing and installing door lock - as of MY 2003 (All Models) .
96 06 19 REMOVING AND INSTALLING CONTACT SWITCH FOR ENGINE COMPARTMENT LIGHT - AS OF MY 2003 (ALL MODELS) PRELIMINARY WORK Remove lock support. Refer to 50 38 19 Removing and installing lock carrier - as of MY 2003 (All Models) . REMOVING CONTACT SWITCH FOR ENGINE COMPARTMENT LIGHT Installation Location:
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 8
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 8: Overview of contact switch for engine compartment light Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 9
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 9: Removing contact switch Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Unlock contact switch -arrow A- . See Fig. 9. 2. Move contact switch -arrow B- and remove it -arrow C- . See Fig. 9. INSTALLING CONTACT SWITCH FOR ENGINE COMPARTMENT LIGHT
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 10
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 10: Installing contact switch Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert contact switch into the bores -arrow A- . See Fig. 10. 2. Move contact switch -arrow B- until the locking lug -C- is felt to engage. See Fig. 10. SUBSEQUENT WORK Install lock support. Refer to 50 38 19 Removing and installing lock carrier - as of MY 2003 (All Models) .
96 07 19 REMOVING AND INSTALLING CONTACT SWITCH FOR GLOVE COMPARTMENT LIGHT - AS OF MY 2003 (ALL MODELS) PRELIMINARY WORK Remove glove compartment. Refer to 68 15 19 Removing and installing glove compartment - as of MY 2003 (All Models) . REMOVING CONTACT SWITCH FOR GLOVE COMPARTMENT LIGHT Installation Location:
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 11
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 11: Overview of contact switch for glove compartment light Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 12
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 12: Removing connector from contact switch Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Release connector -Arrow A- and remove from contact switch -Arrow B- . See Fig. 12.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 13
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 13: Unlocking contact switch Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Unlock contact switch -Arrows A- . See Fig. 13. 3. Press contact switch inwards -Arrow B- until the guide pin -1- pops out of the bore. See Fig. 13. INSTALLING CONTACT SWITCH FOR GLOVE COMPARTMENT LIGHT
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 14
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 14: Positioning contact switch Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert contact switch into the bore -Arrow A- and screw it into the bracket -Arrow B- until the locking tabs are felt to engage. See Fig. 14.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 15
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 15: Pushing connector into contact switch Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Push connector into contact switch -Arrow A- until it is felt to engage -Arrow B- . See Fig. 15. SUBSEQUENT WORK Install glove compartment. Refer to 68 15 19 Removing and installing glove compartment - as of MY 2003 (All Models) .
96 15 19 REMOVING AND INSTALLING BULB FOR FLOOR LIGHT - AS OF MY 2003 (ALL MODELS) BULB TABLE
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 16
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 16: Bulb location overview Courtesy of PORSCHE OF NORTH AMERICA, INC. -E- - Front floor light. See Fig. 16. -I- - Rear floor light. See Fig. 16. REMOVING BULB FOR FLOOR LIGHT 1. Switch off ignition and remove ignition key.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 17
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 17: Levering out front footwell light Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a plastic spatula or screwdriver to lever out the light.
Fig. 18: Levering out rear footwell light Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 18
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 19: Disconnecting rear footwell light Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Pull out light, press connector together -arrows a- and remove it. See Fig. 19.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 19
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 20: Levering off sheetmetal cover from locking elements Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Use a screwdriver to carefully lever off the sheetmetal cover from the four locking elements.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 20
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 21: Pulling bulb out of holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 5. Pull bulb out of holder. INSTALLING BULB FOR FLOOR LIGHT
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 21
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 22: Inserting bulb into holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert bulb into holder.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 22
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 23: Positioning sheetmetal cover and pressing into place Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Position sheetmetal cover and press into place. Ensure that all four locking elements engage properly and the sheetmetal cover is not deformed.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 23
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 24: Inserting plug connection Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Push in connector until it is felt to engage. 4. Insert light into the opening and press into place. Ensure light is fitted properly.
96 16 19 REMOVING AND INSTALLING DOOR WARNING LIGHT - AS OF MY 2003 (ALL MODELS) INFORMATION
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 24
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 25: Overview of lightbulb locactions Courtesy of PORSCHE OF NORTH AMERICA, INC. H - Front door warning light K - Rear door warning light M - Door warning light, luggage compartment lid REMOVING DOOR WARNING LIGHT Removing front door warning light
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 25
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
1. Switch off ignition and remove ignition key.
Fig. 26: Removing front door warning light Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a plastic spatula or screwdriver to pry out the light -H- in the door. See Fig. 26.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 26
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 27: Disconnecting light Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Pull out light, press connector together -arrows a- and remove it. See Fig. 27. Removing door warning light, luggage compartment lid
1. Switch off ignition and remove ignition key.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 27
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 28: Removing door warning light, luggage compartment lid Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a plastic spatula or screwdriver to lever out the light -L- in the luggage compartment lid. See Fig. 28.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 28
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 29: Disconnecting light Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Pull out light, press connector together -arrows a- and remove it. See Fig. 29. Removing bulb for door warning light
1. Remove door warning light. --> 961619 Removing and installing door warning light - "Removing".
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 29
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 30: Levering off sheetmetal cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a screwdriver to carefully lever off the sheetmetal cover from the four locking elements.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 30
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 31: Pulling bulb out of holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Pull bulb out of holder. INSTALLING BULB FOR DOOR WARNING LIGHT
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 31
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 32: Inserting bulb into holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert bulb into holder.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 32
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 33: Positioning sheetmetal cover and pressing into place Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Position sheetmetal cover and press into place. Ensure that all four locking elements engage properly and the sheetmetal cover is not deformed. Installing door warning light
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 33
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 34: Inserting light Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Push in plug connection until it is felt to engage. 2. Insert light into the opening and press into place. Ensure light is fitted properly.
96 22 19 REMOVING AND INSTALLING BULB FOR INTERIOR LIGHT - AS OF MY 2003 (ALL MODELS) INFORMATION
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 34
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 35: Overview of lightbulb locactions Courtesy of PORSCHE OF NORTH AMERICA, INC. B - Interior light in the roof console G - Interior light in front door J - Interior light in rear door REMOVING BULB FOR INTERIOR LIGHT Removing bulb for interior light in roof console
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 35
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
1. Switch off ignition and remove ignition key.
Fig. 36: Levering out light cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a plastic spatula or screwdriver to pry out the light cover.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 36
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 37: Pulling out middle bulb Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Pull out middle bulb. Removing bulb for interior light in door
1. Switch off ignition and remove ignition key.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 37
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 38: Removing light Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Pull out light -G- . See Fig. 38.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 38
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 39: Disconnecting light Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Press on plug -a- and remove it. See Fig. 39.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 39
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 40: Levering sheetmetal cover off Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Use a screwdriver to carefully lever the sheetmetal cover off the four locking elements.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 40
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 41: Pulling bulb out of holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 5. Pull bulb out of holder. INSTALLING BULB FOR INTERIOR LIGHT Installing bulb for interior light in roof console
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 41
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 42: Inserting bulb Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert bulb fully into holder.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 42
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 43: Installing light cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Position cover for lights and press into place. Ensure cover is fitted properly. Installing bulb for interior light in door
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 43
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 44: Inserting bulb into holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert bulb into holder.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 44
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 45: Positioning sheetmetal cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Position sheetmetal cover and press into place. Ensure all four locking elements engage properly and the sheetmetal cover is not deformed.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 45
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 46: Inserting plug connection Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Push in plug until it is felt to engage. 4. Insert light into opening and press into place. Ensure light is fitted properly.
96 41 19 REMOVING AND INSTALLING BULB FOR LUGGAGE COMPARTMENT LIGHT - AS OF MY 2003 (ALL MODELS)
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 46
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 47: Overview of lightbulb locactions Courtesy of PORSCHE OF NORTH AMERICA, INC. L - Luggage compartment light, rear lid N - Luggage compartment light, luggage compartment REMOVING BULB FOR LUGGAGE COMPARTMENT LIGHT Removing bulb for luggage compartment light, luggage compartment
1. Switch off ignition and remove ignition key. Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 47
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 48: Removing light cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a plastic spatula or screwdriver to lever out the light cover -N- . See Fig. 48. 3. Pull off electric plug.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 48
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 49: Opening and pivoting up cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Open cover on the plug side using a screwdriver and pivot up. 5. Remove bulb from holder. Removing bulb for luggage compartment light, rear lid
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 49
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 50: Removing light Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Pull out light -L- . See Fig. 50.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 50
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 51: Disconnecting light Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Press on plug -arrows a- and remove it. See Fig. 51.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 51
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 52: Levering sheetmetal cover off Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Use a screwdriver to carefully lever the sheetmetal cover off the four locking elements.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 52
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 53: Pulling bulb out of holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Pull bulb out of holder. INSTALLING BULB FOR LUGGAGE COMPARTMENT LIGHT Installing bulb for luggage compartment light, luggage compartment
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 53
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 54: Inserting bulb and closing cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert bulb and close cover.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 54
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 55: Connecting plug connection Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Push on electrical plug connection until it is felt to engage. 3. Clip light unit into headliner. Installing bulb for luggage compartment light, rear lid
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 55
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 56: Inserting bulb into holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert bulb into holder.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 56
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 57: Positioning sheetmetal cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Position sheetmetal cover and press into place. Ensure all four locking elements engage properly and the sheetmetal cover is not deformed.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 57
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 58: Inserting plug connection Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Push in plug until it is felt to engage. 4. Insert light into opening and press into place. Ensure light is fitted properly.
96 43 19 REMOVING AND INSTALLING BULB FOR ENGINE COMPARTMENT LIGHT - AS OF MY 2003 (ALL MODELS) INFORMATION
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 58
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 59: Overview of lightbulb locactions Courtesy of PORSCHE OF NORTH AMERICA, INC. D - Engine compartment light REMOVING BULB FOR ENGINE COMPARTMENT LIGHT 1. Switch off ignition and remove ignition key.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 59
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 60: Removing light cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a plastic spatula or screwdriver to lever out the light cover for the engine compartment light -D- . See Fig. 60.
Microsoft Wednesday, September 16, 2009 5:32:13 PM
Page 60
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 61: Pulling off plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Pull out light, press on plug -a- and remove it. See Fig. 61.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 61
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 62: Levering sheetmetal cover off Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Use a screwdriver to carefully lever the sheetmetal cover off the four locking elements.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 62
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 63: Pulling bulb out of holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 5. Pull bulb out of holder. INSTALLING BULB FOR ENGINE COMPARTMENT LIGHT
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 63
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 64: Inserting bulb fully into holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert bulb fully into holder.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 64
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 65: Positioning sheetmetal cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Position sheetmetal cover and press into place. Ensure all four locking elements engage properly and the sheetmetal cover is not deformed.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 65
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 66: Connecting plug connection Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Push in plug until it is felt to engage. 4. Insert light into opening and press into place. Ensure light is fitted properly.
96 47 19 REMOVING AND INSTALLING BULB FOR READING LIGHT - AS OF MY 2003 (ALL MODELS) INFORMATION
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 66
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 67: Overview of lightbulb locactions Courtesy of PORSCHE OF NORTH AMERICA, INC. A - Reading light, roof console O - Reading light, back seat area REMOVING BULB FOR READING LIGHT Removing bulb for reading light in roof console
1. Switch off ignition and remove ignition key. Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 67
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 68: Levering out light cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a plastic spatula or screwdriver to pry out the light cover.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 68
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 69: Removing bulb on left/right Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Remove the defective bulb on the left or right. Removing bulb for reading light in back seat area
1. Switch off ignition and remove ignition key.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 69
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 70: Levering out light cover and pulling off plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a plastic spatula or screwdriver to pry out the light cover. 3. Press the electric plug in and pull off the plug.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 70
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 71: Removing light unit, taking off the cover and removing bulb Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Remove the light unit and take off the cover. 5. Remove the bulb from the holder. INSTALLING BULB FOR READING LIGHT Installing bulb for reading light in roof console
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 71
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 72: Installing bulb Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert the new bulb in the holder.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 72
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 73: Positioning the cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Position the bulb cover and press until the cover clicks into place. Installing bulb for reading light in back seat area
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 73
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 74: Inserting bulb and positioning the cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert the new bulb in the holder. 2. Position the cover and press into place.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 74
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 75: Connecting plug connection and installing light unit Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Connect the electric plug connection until the plug clicks into place. 4. Push the light unit in as far as it will go.
96 59 19 REMOVING AND INSTALLING BULB FOR GLOVE COMPARTMENT LIGHT - AS OF MY 2003 (ALL MODELS) INFORMATION
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 75
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 76: Overview of lightbulb locactions Courtesy of PORSCHE OF NORTH AMERICA, INC. C - Front glove compartment light F - Glove compartment light, center console REMOVING BULB FOR GLOVE COMPARTMENT LIGHT 1. Switch off ignition and remove ignition key.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 76
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 77: Levering out the light Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Use a plastic spatula or screwdriver to pry out the light.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 77
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 78: Removing plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Pull out light, press on plug -arrows a- and remove it. See Fig. 78.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 78
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 79: Levering sheetmetal cover off Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Use a screwdriver to carefully lever the sheetmetal cover off the four locking elements.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 79
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 80: Pulling bulb out of holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 5. Pull bulb out of holder. INSTALLING BULB FOR GLOVE COMPARTMENT LIGHT
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 80
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 81: Inserting bulb into holder Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert bulb into holder.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 81
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 82: Positioning sheetmetal cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Position sheetmetal cover and press into place. Ensure all four locking elements engage properly and the sheetmetal cover is not deformed.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 82
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 83: Connecting plug connection Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Push in plug until it is felt to engage. 4. Insert light into opening and press into place. Ensure light is fitted properly.
96 62 01 RADIO REMOTE CONTROL IN HAND-HELD TRANSMITTER DOES NOT FUNCTION - AS OF MY 2003 (ALL MODELS) INVESTIGATE CAUSES The radio remote control function is unavailable under the following circumstances: Empty battery in hand-held transmitter
Battery replacement restores the full functionality without additional measures. The same applies in the case of an empty vehicle battery.
Radio transmitter outside lock-in range
1. If the transmitter is operated less than 32 times without reaching the associated receiver - e. g. vehicle out of range or vehicle battery disconnected. - Re-synchronization is carried out according to the following procedure: Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 83
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
- 1. If the status is "Radio transmitter within range", re-synchronization occurs automatically. 2. If the transmitter is operated more than 32 but less than 256 times without reaching the associated receiver e. g. vehicle out of range or vehicle battery disconnected - the vehicle will not recognize the radio transmitter the next time it is operated! - Re-synchronization is carried out according to the following procedure: - 1. Operate the radio remote control twice within 15 seconds. 3. If the transmitter is operated more than 256 times without reaching the associated receiver - e. g. vehicle out of range or vehicle battery disconnected - the vehicle will not recognize the radio transmitter the next time it is operated! - Re-synchronization is carried out according to the following procedure: - 1. Switch on ignition with key and valid transmitter. - 2. The lock-in range has now been reset to zero (as is the case with every recognized transmitter operation). Atmospheric interference or interfering transmitters
The possibility of temporary interference by interference sources, and thus lack of function, cannot be ruled out due to the many small users operating on the radio frequencies permissible for the automotive application. The Cayenne model can be unlocked with the vehicle key via the door lock. The immobilizer and the anti-theft warning system are deactivated after activating the ignition (terminal 15). If the ignition is not activated within 15 seconds, the anti-theft warning system is triggered. Energy-saving mode active
In contrast to the 996, the radio receiver is not deactivated in the case of the Cayenne. In the case of a Cayenne with the Entry and Drive option, the proximity sensors in the outer door handles are switched off for closed-circuit current reasons.
After 30 hours, the proximity sensors on the front passenger's and rear doors are switched off. After 90 hours, the proximity sensor on the driver's door is switched off.
Keyless access is only possible in this case by actuating the outer door handle twice. Fault in hand-held transmitter or vehicle
If the LED on the hand-held transmitter stays dark when the transmitter is operated, this is an indication of either an empty battery or a faulty hand-held transmitter.
96 62 55 REPLACING REMOTE CONTROL - AS OF MY 2003 (ALL MODELS) Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 84
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
REPLACING REMOTE CONTROL Removing key bit
Fig. 84: Removing roll pin Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Release the key of the remote control and carefully jam a crosshead screwdriver -A- between remote control and key so that the key does not engage in its end position. See Fig. 84. 2. Place a tool, e. g. a 10-mm open-ended/ring wrench -B- , between the key bit and the working surface. See Fig. 84. 3. Drive out the roll pin -C- - spring steel (max. diameter 1.5 mm) - with a tool such as a mandrel. See Fig. 84. Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 85
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 85: Pulling out roll pin with pliers Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Fully pull out the roll pin with a pair of pliers.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 86
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 86: Pulling out key bit Courtesy of PORSCHE OF NORTH AMERICA, INC. 5. Pull out key bit -arrow- from the remote control. See Fig. 86. Installing key bit
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 87
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 87: Installation position of key bit Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Use a new remote control and insert the key bit -arrow- at the correct installation position (groove). See Fig. 87.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 88
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 88: Installing new roll pin Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Insert a new roll pin for securing the key bit using the pliers and center the spring steel (max. diameter 1.5 mm) using a tool such as a mandrel. Roll pin must not rub on the remote control housing. See Fig. 88. SUBSEQUENT WORK Subsequent work for replacing remote control
Teaching remote control. --> 9662AN Teaching remote control - "Teaching"
96 62 AN TEACHING HAND-HELD TRANSMITTER - AS OF MY 2003 (ALL MODELS) PROCEDURE FOR TEACHING HAND-HELD TRANSMITTER NOTE:
The immobilizer system consists of four components - Kessy control unit/immobilizer control unit, electrical steering lock, DME control module and vehicle hand-held transmitter. If it is necessary to replace one of these components because of a defect, the new component can be adapted to the existing system. To do this, at least two of the components of the vehicle immobilizer system must still be present. In addition, the Porsche System Tester and the immobilizer
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 89
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
NOTE:
code from IPAS are required. You can get the codes from IPAS or from your importer by specifying the vehicle identification number. Follow the instructions for the Porsche System Tester. Only new hand-held transmitters or those already adapted to the immobilizer system on the vehicle can be taught. Hand-held transmitters that are already adapted are overwritten, and so all hand-held transmitters that will later be used on the vehicle must be taught. Teaching of keys is protected over a time period. Once this time has elapsed, teaching is aborted.
1. Ignition off. Connect the Porsche System Tester to the vehicle and start the System Tester. Select vehicle type. 2. Switch on warning indicator light; this will activate CAN and ensure that the KESSY control unit is identified. 3. Select KESSY control unit >>. 4. Select the Teaching function menu >>. 5. Select the Teach keys menu >>. 6. Enter immobilizer code >> and confirm by pressing F7. 7. Insert key 1. 8. Enter the number of keys to be taught (1-8), then press >> and confirm by pressing F7. Turn key No. 1 (already inserted in ignition lock) to position ON (ignition) - ignition is switched on if teaching is correct. NOTE:
In the case of keys with the Keyless function, after teaching, press a button on the radio remote control to activate this function.
Turn key No. 1 to OFF and remove from ignition lock. Insert key No. 2 in ignition lock and turn to position ON (ignition), then press >> - ignition is switched on if teaching is correct. Repeat procedure with all keys to be taught (having entered number). Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 90
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
9. Read out and erase fault memory. 10. Start the engine with all the taught keys/hand-held transmitters in turn.
96 63 19 REMOVING AND INSTALLING TILT SENSOR CONTROL UNIT - AS OF MY 2003 (ALL MODELS) PRELIMINARY WORK Preliminary work
1. Remove the side-panel lining at rear right. Refer to 70 03 19 Removing and installing rear luggage compartment side-trim panel - as of MY 2003 (All Models) . REMOVING TILT SENSOR CONTROL UNIT NOTE:
The tilt sensor is integrated into the tilt control unit and cannot be separately replaced.
Installation Location:
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 91
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 89: Overview of tilt sensor control unit Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Switch off ignition and remove ignition key.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 92
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 90: Removing tilt sensor Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Undo the two fastening screws -arrows A- and remove tilt sensor. See Fig. 90.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 93
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 91: Pulling off plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Press detent on plug -arrow a- and pull off plug. See Fig. 91. INSTALLING TILT SENSOR CONTROL UNIT
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 94
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 92: Inserting plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Push in electric plug of control unit until it is felt to engage.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 95
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 93: Install and screw down control unit. Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Position control unit on support and screw it down with fastening screws -arrows B- . See Fig. 93. SUBSEQUENT WORK Subsequent work
1. Install the side-panel lining at rear right. Refer to 70 03 19 Removing and installing rear luggage compartment side-trim panel - as of MY 2003 (All Models) .
96 65 19 REMOVING AND INSTALLING THE ALARM SIREN - AS OF MY 2003 (ALL MODELS) PRELIMINARY WORK Preliminary work
1. Release the relay carrier in the plenum chamber E-box and lay it aside. Refer to 97 90 19 Removing and installing relay carrier, plenum chamber E-box - as of MY 2003 (All Models) . REMOVING THE ALARM SIREN Installation Location: Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 96
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 94: Overview of alarm siren Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 97
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 95: Removing horn Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Unscrew fastening screw -arrow 1- and pull the horn aside and upwards -arrow- . See Fig. 95.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 98
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 96: Removing plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Release the plug -arrows A- and pull it off -arrow B- . See Fig. 96. INSTALLING THE ALARM SIREN
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 99
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 97: Inserting the plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Connect the plug to the horn -arrow A- until the lock -B- clicks into place. See Fig. 97.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 100
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 98: Securing horn Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Tightly screw the horn to the holder using the fastening screw -1- . --> Tightening torque: 17 ftlb. See Fig. 98. SUBSEQUENT WORK Subsequent work
1. Install the relay carrier in the plenum chamber E-box. Refer to 97 90 19 Removing and installing relay carrier, plenum chamber E-box - as of MY 2003 (All Models) .
96 66 19 REMOVING AND INSTALLING KESSY/IMMOBILIZER CONTROL UNIT - AS OF MY 2003 (ALL MODELS) IMPORTANT INFORMATION NOTE:
If the Kessy control unit is replaced, it must be programmed using the Porsche System Tester. This will ensure that the control unit is taught for the relevant vehicle, country version and equipment. If possible, before the control unit is removed and replaced, a read-out of the vehicle data should be obtained from the Porsche System Tester. Symbol for the Tab key = -->|
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 101
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Follow the instructions for the Porsche System Tester.
The following versions are listed in the Kessy/immobilizer Coding menu:
Versions
NOTE:
Version Kessy with Tiptronic Kessy with manual transmission Immobilizer with Tiptronic Immobilizer with manual transmission NOTE:
If not coded, select the vehicle-dependent, required version and code with F8.
OBTAINING READ-OUT AND SAVING VEHICLE DATA FROM CONTROL UNIT NOTE:
In order to guarantee the function of the control unit after teaching, the coding value in the old control unit must be read out or determined again. This value must be written into the new control unit after teaching.
1. Connect the Porsche System Tester to the vehicle and start the System Tester. Switch on ignition. Press >> to continue. 2. Select vehicle type using the cursor keys. 3. Using the -->| key, move from the vehicle type to the list of control units. 4. Select Kessy/immobilizer control unit with the cursor keys and press the >> key. 5. Select Control unit replacement with the cursor keys and press the >> key. 6. Select Read out values (vehicle data) with the cursor keys and press the >> key. 7. The note "Coding read complete" will appear on the screen of the Porsche System Tester. 8. After replacement of the Kessy/immobilizer control unit, the data that was read out is installed in the "Teach Kessy/immobilizer" menu (see point 6). PRELIMINARY WORK Preliminary work
1. Remove cover under instrument panel on left. Refer to 70 22 19 Removing and installing cover under Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 102
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
dashboard - as of MY 2003 (All Models) . REMOVING KESSY/IMMOBILIZER CONTROL UNIT NOTE:
The control unit is located beside the hot air unit.
Installation Location:
Fig. 99: Overview of Kessy/immobilizer control unit Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 103
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 100: Removing control unit Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Push the two locking tabs apart -arrows A- . Pull the control unit to the right and downwards -arrow B- . See Fig. 100.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 104
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 101: Removing plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Press and pull off plug -arrow A- . Open lock -arrow B- on plug -arrow C- and remove plug. See Fig. 101. 3. Remove control module. INSTALLING KESSY/IMMOBILIZER CONTROL UNIT
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 105
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 102: Inserting plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Push on plug -arrow C- and lock it -arrow B- . See Fig. 102. 2. Connect plug -arrow A- until it clicks into place. See Fig. 102.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 106
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 103: Installing control unit Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Insert control unit into the upper mounting point -arrow B- and engage in holder -arrows A- . See Fig. 103. SUBSEQUENT WORK Subsequent work
1. Install cover under left instrument panel. Refer to 70 22 19 Removing and installing cover under dashboard - as of MY 2003 (All Models) . PROGRAMMING NEW KESSY/IMMOBILIZER CONTROL UNIT Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 107
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
NOTE:
All original keys are required for teaching. If a new Kessy control unit is to be installed in a vehicle, the immobilizer code specified in IPAS must be entered. You can get the codes from IPAS or from your importer by specifying the vehicle identification number. During programming, it is essential to guarantee the power supply for the Porsche System Tester. A battery charger with a current rating of at least 40A must be connected to the vehicle battery. Symbol for the Tab key = -->|. The Porsche System Tester instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. A discrepancy may arise with later software versions (16.0 or higher). The procedure described here has been structured in general terms; different text or additions may appear in the Porsche System Tester. In order to guarantee the function of the control unit after teaching, the coding value in the old control unit must be read out or determined again. This value must be written into the new control unit after teaching. --> 966619 Removing and installing Kessy/immobilizer control unit - "reading out".
1. Ignition off. 2. Replace control unit. --> 966619 Removing and installing Kessy/immobilizer control unit - "Removing". 3. Ignition remains off, connect the Porsche System Tester (PST) to the vehicle and start the System Tester. 4. Select Special functions using the cursor keys. 5. Select Kessy Cayenne using the cursor keys. NOTE:
The brake pedal must be operated during the control unit search. The reason for this is that the CAN remains active. If the brake pedal is not pressed, the Kessy control unit will not be recognized.
6. The message "System learned" appears in the instrument cluster. 7. Switch to the Special functions menu and go to Kessy Cayenne. 8. Select Teach Kessy/immobilizer in the Control unit replacement menu and press >> to continue. NOTE:
Follow the instructions on the Tester.
9. Insert key, then press >> --> Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 108
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
10. Enter new immobilizer code with >> and confirm by pressing F7. 11. The version is displayed. If the data could not be read out when replacing the control unit - see --> 966619 Removing and installing Kessy/immobilizer control unit - "Removing"- then select the version and code with F8 - see --> 966619 Removing and installing Kessy/immobilizer control unit - "Information". 12. Teach Kessy, then press >>. 13. Teach keys, then press >>. The number of keys to be taught must be specified. NOTE:
All keys that exist for this vehicle must be specified here.
14. Follow the instructions on the Tester. 15. Read out the fault memory for all faulty control units, then erase fault memory. NOTE:
Before the engine can be started, a wait time of 5 minutes must be observed only once.
16. Start engine with all keys, one after the other. REPLACING KESSY/IMMOBILIZER CONTROL UNIT NOTE:
If the Kessy control unit from a different vehicle is being used, proceed as follows. As a check, the immobilizer code of the vehicle in which the control unit is being installed (NEW) and of the vehicle from which the control unit has been removed (OLD) are required. You can get the necessary codes from IPAS or from your importer by specifying the vehicle identification number. During DME programming, it is essential to guarantee the power supply for the Porsche System Tester. A battery charger with a current rating of at least 40A must be connected to the vehicle battery. Symbol for the Tab key = -->|. The Porsche System Tester instructions take precedence and in the event of a discrepancy these are the instructions that must be followed. A discrepancy may arise with later software versions (16.0 or higher). The procedure described here has been structured in general terms; different text or additions may appear in the Porsche System Tester.
1. Ignition off. 2. Replace control unit. --> 966619 Removing and installing Kessy/immobilizer control unit - "Removing" 3. Ignition remains off, connect the Porsche System Tester (PST) to the vehicle and start the System Tester. Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 109
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
4. Select Special functions using the cursor keys. 5. Select Kessy Cayenne using the cursor keys. NOTE:
The brake pedal must be operated during the control unit search. The reason for this is that the CAN remains active. If the brake pedal is not pressed, the Kessy control unit will not be recognized.
6. The message "System learned" appears in the instrument cluster. 7. Switch to the Special functions menu and go to Kessy Cayenne. 8. Select Teach Kessy/immobilizer in the Control unit replacement menu and press >> to continue. NOTE:
Follow the instructions on the Tester.
9. Insert key, then press >>. 10. Enter old immobilizer code using >> and confirm by pressing F7. 11. Enter new immobilizer code with >> and confirm by pressing F7. 12. The version is displayed. If the data could not be read out when replacing the control unit - see --> 966619 Removing and installing Kessy/immobilizer control unit - "reading out"- then select the version and code with F8 - see --> 966619 Removing and installing Kessy/immobilizer control unit - "Information". 13. Teach Kessy, then press >>. 14. Teach keys, then press >>. The number of keys to be taught must be specified. NOTE:
All keys that exist for this vehicle must be specified here.
15. Follow the instructions on the Tester. 16. Read out the fault memory for all faulty control units, then erase fault memory. NOTE:
Before the engine can be started, a wait time of 5 minutes must be observed only once.
17. Start engine with all learned keys, one after the other.
96 67 19 REMOVING AND INSTALLING KESSY ANTENNA - AS OF MY 2003 (ALL MODELS) Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 110
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
PRELIMINARY WORK Preliminary work, antenna A
1. Remove cover for center console. Refer to 68 19 19 Removing and installing cover for center console - as of MY 2003 (All Models) . Preliminary work, antenna B
1. Open luggage compartment lid and remove luggage-compartment trim (loadspace cover). Refer to 70 06 19 Removing and installing luggage compartment trim (loadspace cover) - as of MY 2003 (All Models) . Subsequent work, antenna C
1. Remove rear spoiler. Refer to 63 55 19 Removing and installing rear spoiler - as of MY 2003 (All Models) . INFORMATION Component information
Installation Location:
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 111
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 104: Overview of KESSY antenna Courtesy of PORSCHE OF NORTH AMERICA, INC. A - KESSY antenna, center console B - KESSY antenna, luggage compartment C - KESSY antenna, rear impact member REMOVING ANTENNAE Removing front antenna, center console (A)
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 112
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 105: Removing antenna Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Unscrew fastening screw -arrow 1- . See Fig. 105. 2. Disengage antenna on center console and remove to the front. 3. Release connector -arrows a- and remove from antenna. See Fig. 105. Removing rear antenna, center console (A)
NOTE:
For vehicles with rear seat heating, remove the shelf together with the regulators for rear seat heating. Refer to 74 26 19 Removing and installing
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 113
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
regulator for rear seat heating - as of MY 2003 (All Models) . For vehicles with air-conditioning, remove the control unit for the airconditioning system. Refer to 88 48 19 Removing and installing control unit for auxiliary air conditioner - as of MY 2003 (All Models) .
Fig. 106: Pulling out and removing shelf or cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Pull out shelf or cover -arrow A- . See Fig. 106. 2. Pull out cup holder, lift at rear edge -arrows B- and remove completely over the stop -arrow C- . See Fig. 106.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 114
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 107: Removing antenna Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Unscrew fastening screw -arrow 1- . See Fig. 107. 4. Disengage antenna on center console, slide forwards and remove. 5. Release connector -arrows a- and remove from antenna. See Fig. 107. Removing KESSY antenna, luggage compartment (B)
NOTE:
The KESSY antenna is located under the floor carpet trim, centrally in the area of the backrest for the rear seat.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 115
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
For vehicles with the 4-zone air conditioning system, the antenna is located further forward. See main illustration. The reason for this is the rear air guide. The antennae are accessible from the luggage-compartment. The antennae are stuck to the floor with double-sided adhesive tape.
1. Lift central carpet, run a plastic spatula between body floor and antenna and detach antenna by lifting from the adhesive.
Fig. 108: Unplugging and removing connector Courtesy of PORSCHE OF NORTH AMERICA, INC. NOTE: Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 116
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Variant -A- shows the installation position and accessibility for the 4-zone air-conditioning system. See Fig. 109. Variant -B- shows the installation position and accessibility for the 2-zone air-conditioning system. See Fig. 109.
Fig. 109: Variations, KESSY antenna, luggage compartment (B) Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Pull antenna forward, release electric plug -arrows a- and remove from antenna. See Fig. 108. Removing KESSY antenna on rear impact member (C)
NOTE:
The antennae are inserted in the foam part of the rear bumper.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 117
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 110: Removing antennae Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Lift antennae out of the foam part. 2. Release connector -arrows a- and remove from antenna. See Fig. 110. INSTALLING ANTENNAE Installing front antenna, center console (A)
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 118
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 111: Installing antenna Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Push connector onto antenna until locking mechanism is felt to engage. 2. Insert antenna in center console and engage. 3. Screw in and tighten fastening screw -arrow 1- . --> Tightening torque: 4 ftlb. See Fig. 111. Installing rear antenna, center console (A)
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 119
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 112: Installing antenna Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Push connector on antenna until lock is felt to engage. 2. Insert antenna in center console and engage. 3. Screw in and tighten fastening screw -arrow 1- . --> Tightening torque: 4 ftlb. See Fig. 112. 4. Insert the cup holder until the locking tab is felt to engage. 5. Push in shelf until it is felt to engage. NOTE: Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 120
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
For vehicles with seat heating, install the oddments tray together with the regulators for rear seat heating. Refer to 74 26 19 Removing and installing regulator for rear seat heating - as of MY 2003 (All Models) . For vehicles with air-conditioning, install the control unit for the airconditioning system. Refer to 88 48 19 Removing and installing control unit for auxiliary air conditioner - as of MY 2003 (All Models) .
Installing KESSY antenna, luggage compartment (B)
1. Remove adhesive residue. 2. Stick double-sided adhesive tape on bottom of antenna.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 121
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 113: Installing antenna Courtesy of PORSCHE OF NORTH AMERICA, INC. NOTE:
Variant -A- shows the installation position and accessibility for the 4-zone air-conditioning system. See Fig. 114. Variant -B- shows the installation position and accessibility for the 2-zone air-conditioning system. See Fig. 114.
Fig. 114: Installing KESSY antenna, luggage compartment Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Push antenna under carpet and push on connector so that lock is felt to engage. Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 122
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
4. Pull off adhesive film, position antenna and press into place. 5. Install luggage compartment trim (loadspace cover). Refer to 70 06 19 Removing and installing luggage compartment trim (loadspace cover) - as of MY 2003 (All Models) . Installing KESSY antenna on rear impact member (C)
Fig. 115: Inserting and pushing in antenna Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Push connector on antenna until lock is felt to engage. 2. Insert antennae in foam part. Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 123
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
SUBSEQUENT WORK Subsequent work, antenna A
1. Fit cover for center console. Refer to 68 19 19 Removing and installing cover for center console - as of MY 2003 (All Models) . Subsequent work, antenna B
1. Install luggage compartment trim (loadspace cover). Refer to 70 06 19 Removing and installing luggage compartment trim (loadspace cover) - as of MY 2003 (All Models) . Subsequent work, antenna C
1. Install rear spoiler. Refer to 63 55 19 Removing and installing rear spoiler - as of MY 2003 (All Models) .
96 79 19 REMOVING AND INSTALLING CONTROL UNIT FOR GARAGE DOOR OPENER - AS OF MY 2003 (ALL MODELS) REMOVING CONTROL UNIT FOR GARAGE DOOR OPENER 1. Remove ignition key.
Microsoft Wednesday, September 16, 2009 5:32:14 PM
Page 124
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 116: Removing cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Remove cover for interior light. From side of windscreen, grasp center of bulb cover and pull down. Unclip light unit cover and undo both fastening screws. 3. Open the glasses compartment and undo both fastening screws.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 125
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 117: Removing plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 4. Detach roof console around sliding roof switch on roof liner and allow it to hang down to the front. 5. Compress lock -arrows a- on electric plug for garage door opener control unit and pull off plug. See Fig. 117. 6. Unscrew both fastening screws. INSTALLING CONTROL UNIT FOR GARAGE DOOR OPENER
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 126
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 118: Inserting the plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Push electric plug onto control unit until it is felt to engage. 2. Position control unit on the PCB and secure with the two fastening screws. NOTE:
Observe the line routing, danger of pinching!
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 127
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 119: Install cover Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Fold up roof console, clip it in the roof liner and screw down using the four fastening screws. Close the glasses compartment and clip in the light unit cover. TEACHING CONTROL UNIT FOR GARAGE DOOR OPENER WARNING: Danger of accidents if persons, animals or objects lie in the swinging range of the controlled mechanism during operation of the garage door opener. --> Ensure that there are no persons, animals or objects in the swinging range of the controlled mechanism during operation of the garage door opener. Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 128
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
--> Observe the safety instructions for the original hand-held transmitter. To operate the particular device (e. g. garage door, gate to property, alarm system):
Fig. 120: Overview of keypad Courtesy of PORSCHE OF NORTH AMERICA, INC. - press the appropriate key on the keypad -A- . The LED -B- lights up during signal transmission. See Fig. 120. Operating instructions: Always use the garage door opener in the direction of travel. Otherwise range limitations cannot be ruled out. Before selling the vehicle, erase the programmed garage door opener signals on the keypad -A- . See Fig. 120. Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 129
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
To determine whether the original hand-held transmitter has a fixed or variable code, please read the instructions for the original hand-held transmitter. In the case of a standard fixed code, the LED in the roof console is permanently lit during the transmission process. No further steps are necessary for the operation of compatible systems. If the system that is set is not activated by the garage door opener control unit, this may be because the original hand-held transmitter is programmed with a variable code. --> 967919 Removing and installing garage door opener control unit - "Coding". ASSIGNING GARAGE DOOR OPENER SIGNALS TO KEYS Garage door opener with fixed code system
1. Observe the operating instructions for the original hand-held transmitter (e. g. for the garage door opener).
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 130
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 121: Overview of keypad Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Press the two outer keys -A- I and III in the roof console. Do not release these keys again until the LED -Bstarts to flash after approx. 20 seconds. See Fig. 121.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 131
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 122: Sending signal using original hand-held transmitter Courtesy of PORSCHE OF NORTH AMERICA, INC. NOTE:
This operation erases the standard codes set in the factory. Do not repeat this operation if additional hand-held transmitters are to be taught.
3. Hold the original hand-held transmitter for the unit that is to be taught at a constant distance of 5-20 cm from the roof console and observe the LED in the roof console -B- . See Fig. 122. NOTE:
The distance required between the hand-held transmitter and the garage door opener control unit depends on the system used. A number of attempts may be necessary. Each setting tried must be maintained for at least 15 seconds before trying out another position.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 132
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
4. At the same time, press the key on the hand-held transmitter and the desired key on the roof console I, II or III. Hold keys down until step 5 has been completed. 5. The LED in the roof console first flashes slowly and then rapidly. As soon as the LED flashes rapidly, release both keys. The rapidly flashing LED -B- confirms that the new frequency signal has been programmed successfully. See Fig. 122. 6. To assign garage door opener signals to further keys, repeat steps 3 to 4. Garage door opener with variable code system
Fig. 123: Overview of keypad Courtesy of PORSCHE OF NORTH AMERICA, INC. Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 133
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Using the following steps, it is possible to check whether the garage door drive (or other system) is programmed with a variable code. Check operating instructions for the garage door drive (or other system) for specification of a variable code. The hand-held transmitter appears to program the garage door opener control unit but fails to actuate the garage door (or other system). Press the programmed key -A- in the roof console and hold it down. In the case of a variable code system, the LED -B- flashes rapidly for a short time and then remains constantly on for two seconds. This pattern is repeated for up to 20 seconds. See Fig. 123. If the garage door opener control unit has been programmed to a variable code system, it will still have to be synchronized with this system on completion of programming before it will work correctly. Variable code synchronization The vehicle must be in range of the radio remote controlled garage door drive (or other system). 1. Locate the Setup button at the top part of the motor on the garage door drive. The exact position and color can vary depending on the manufacturer of the garage door opener (see operating instructions for the garage door drive, Chapter - Teaching additional hand-held transmitter). 2. Press the Setup button at the top of the motor on the garage door drive (this then normally activates a Setup LED display). NOTE:
After step 2, it takes on average 30 seconds to initiate step 3.
3. Press the programmed key -A- in the roof console and then release it. Press the same key a second time and release again to complete the setup procedure (for some garage door openers it may be necessary to repeat this procedure a third time to complete the adjustment). See Fig. 123. 4. To assign garage door opener signals to further keys, repeat steps 1 to 3. Re-programming individual keys for the garage door opener control unit
If another radio remote controlled system is to be programmed to an already assigned transmitter channel, perform the following steps. The existing programming of the particular transmitter channel will be lost.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 134
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 124: Sending signal using original hand-held transmitter Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Press and hold down the desired key -A- I, II, or III until step 4 has been performed. See Fig. 124. 2. When the LED -B- starts to flash slowly (after 20 seconds), hold the hand-held transmitter at a distance of 520 cm in front of the keys -A- in the roof console. See Fig. 124. NOTE:
Observe the LED and maintain the required distance between the handheld transmitter and garage door opener control unit for at least 15 seconds. A number of attempts may be necessary as different hand-held transmitters require different distances.
3. Press and hold down the programmed key on the hand-held transmitter. Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 135
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
4. The LED -B- in the roof console first flashes slowly and then more rapidly. As soon as the LED begins to flash more rapidly, release both keys. See Fig. 124. Erasing programmed keys for the garage door opener control unit
The keys can only be re-programmed individually but cannot be erased individually. To erase the existing programming of all three transmitter channels, proceed as follows: 1. Press the two outer keys I and III in the roof console and hold for 20 seconds until the indicator lamp begins to flash. 2. Release the keys. The integrated garage door opener control unit is now in setup mode (learning mode) and can be reprogrammed at any time. --> 967919 Removing and installing garage door opener control unit - "Coding". NOTE:
As a precautionary measure, it is advisable to erase the programming of the garage door opener control unit before selling the vehicle.
Coding country coding
NOTE:
The Euro Home Link (RoW variant) must be coded for various countries because of diverse national frequency registrations and modulations.
Press keys I and III on the Home Link to set regional codes (country codes for Europe) and keep them pressed for approx. 30 seconds until the LED goes out (the LED flashes after 20 seconds and goes out after another 10 seconds). 1. Release the keys. 2. Press keys I and III on the Home Link again and press key II briefly after approx. 1 second. 3. The number of flashes indicates the country code (continue to hold down the outer keys I and III). One flash Two flashes Three flashes Four flashes
Rest of Europe (e. g. Germany) France U. K. Italy
4. The country code can now be incremented by pressing the II key. Each time you press the II key, another country is set. After 4 flashes, it returns to one flash, e. g. for Germany. 5. Release all keys once you have set the country coding. 6. Press keys I and III for approx. 20 seconds to get into Training mode (the LED flashes slowly after about 20 Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 136
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
seconds). 7. Original hand-held transmitters can now be taught. --> 967919 Removing and installing garage door opener control unit - "Coding". Frequencies: Rest of Europe France U. K. Italy
27, 40, 433 MHz 27, 30, 40, 433 MHz 27, 40, 418, 433 MHz 27, 30, 40, 433 MHz
France and Italy have different channel rasters. OBTAINING DIAGNOSTIC INFORMATION If after carefully observing the operating instructions and following the procedures described, teaching of the garage door opener control unit is not possible, further information can be obtained from a hotline facility. A basic requirement is to obtain the diagnostic information beforehand as follows. Software version 1. Press key I or III (not both) and hold for 50 seconds. The LED stops flashing and goes out completely. Continue to hold the key down. A few seconds later the LED flashes several times. The number of flashes corresponds to the software version. Four flashes
Version 4.0
Regional code status 2. Press key II on the roof console and hold for approx 50 seconds until the LED goes out and remains out. Continue to hold key II down. After a few seconds the LED flashes several times. The number of flashes indicates the programmed region. One flash Two flashes Three flashes Four flashes
Rest of Europe France U. K. Italy
Information 3. Provide the following additional information about the vehicle and the original hand-held transmitter: - Dealer, make, model and model year of the vehicle. Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 137
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
- Make, model, age and operating frequency of the original hand-held transmitter. Hotline Internet: www.homelink.com Telephone: (0) 800 0466 354 65 Faxback: +49 (0) 6838 907 283 3333
96 85 19 REMOVING AND INSTALLING SENSOR FOR PASSENGER COMPARTMENT MONITORING - AS OF MY 2003 (ALL MODELS) REMOVING SENSOR FOR PASSENGER COMPARTMENT MONITORING 1. Remove ignition key.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 138
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 125: Releasing roof console Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Remove cover for interior light. From side of windscreen, grasp center of bulb cover and pull down. Unclip light unit cover and undo both fastening screws. 3. Open the glasses compartment and undo both fastening screws. 4. Detach roof console around sliding roof switch on roof liner and allow it to hang down to the front.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 139
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 126: Disconnecting electrical plug connection Courtesy of PORSCHE OF NORTH AMERICA, INC. 5. Press electrical plug -4- on the compartment sensor -arrow a- and unplug. See Fig. 126.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 140
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 127: Releasing the sensor Courtesy of PORSCHE OF NORTH AMERICA, INC. 6. Release sensor -arrows A- and remove from roof console -arrows B- . See Fig. 127. INSTALLING SENSOR FOR PASSENGER COMPARTMENT MONITORING
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 141
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 128: Installing the sensor Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Insert sensor into roof console frame -arrows A- until the locking lugs -arrows B- are felt to engage. Ensure it is seated properly. See Fig. 128.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 142
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 129: Connecting electrical plug Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Connect the electrical plug -arrow 4- until it clicks audibly into place. See Fig. 129.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 143
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 130: Installing roof console Courtesy of PORSCHE OF NORTH AMERICA, INC. 3. Fold up roof console, clip it in the roof liner and screw down using the four fastening screws. Close the glasses compartment and clip in the light unit cover. NOTE:
After replacing the passenger compartment sensor, read out the fault memory from the central control unit for the comfort system (rear control unit) and then erase it.
96 89 19 REMOVING AND INSTALLING LIGHT-EMITTING DIODE FOR ALARM SYSTEM - AS OF MY 2003 (ALL MODELS) Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 144
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
PRELIMINARY WORK Remove door trim panel. Refer to 70 59 19 Removing and installing front door trim panel - as of MY 2003 (All Models) . REMOVING LIGHT-EMITTING DIODE FOR ALARM SYSTEM Installation Location:
Fig. 131: Overview of light-emitting diode for alarm system Courtesy of PORSCHE OF NORTH AMERICA, INC.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 145
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 132: Removing light-emitting diode Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Release light-emitting diode -Arrows A- and pull it down and off -Arrow B- . See Fig. 132.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 146
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 133: Unplugging light-emitting diode Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Release -Arrow A- and pull off -Arrow B- plug. See Fig. 133. INSTALLING LIGHT-EMITTING DIODE FOR ALARM SYSTEM
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 147
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 134: Inserting light-emitting diode Courtesy of PORSCHE OF NORTH AMERICA, INC. 1. Plug in the light-emitting diode connector -Arrow A- until the locking tab -Arrow B- is felt to engage. See Fig. 134.
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 148
© 2005 Mitchell Repair Information Company, LLC.
2006 Porsche Cayenne 2003-2008 ACCESSORIES & EQUIPMENT Lights, Lamps, Switches Interior, Theft Protection
Fig. 135: Installing light-emitting diode Courtesy of PORSCHE OF NORTH AMERICA, INC. 2. Press light-emitting diode into the housing -Arrow A- until the locking tabs are felt to engage -Arrows B- . See Fig. 135. SUBSEQUENT WORK Install door trim panel. Refer to 70 59 19 Removing and installing front door trim panel - as of MY 2003 (All Models) .
Microsoft Wednesday, September 16, 2009 5:32:15 PM
Page 149
© 2005 Mitchell Repair Information Company, LLC.
