NanoTeK 2 Component Clear Laque

NanoTeK Clear Laque is a 2 component clear paint that is based on chemical nano technology. It is a transparent permanent lacquer without any pigmentation with remarkable finish, weather resistance, excellent mechanical properties and excellent UV protection. NanoTeK Clear Laque protects aluminum or other light metal components, steel, stainless steel, plastic & polymeric materials & wood from corrosion dirt adhesion through its water and oil repellant (hydro- and oleophobic) features. The resulting effect, similar to the one found in nature on the Lotus flower, reduces any kind of stains by up to 90% or makes them removable with a wet towel without the need of scrubbing or using additional cleaning products. Surfaces can be kept clean with only using water; chemical cleaners are a thing of the past which makes NanoTeK Clear Laque the most environmental friendly solution for all your needs. Nano-technology covers the surface of the material with a Tri - Layer of selforganizing molecules which are smaller than the wave length of visible light. The optical appearance of the surface is not affected by the ultra thin layer of the NanoTeK Clear Laque. Application and technical Info Consumption 20 ml/m² depending on consistency of the surface material and application method. Cleaning The surface must be clean and dry, free of grease and tensides (soap or cleaner residues) and free of silicone or Teflon. Application Apply on soft cloth and rub onto surface in circular motion with little pressure. Please allow at least one hour for full effect to set in. Excessive coating material can be removed 10-15 minutes after coating by polishing with a soft cloth.

Product is suited for the following surfaces NanoTeK Clear Laque is suited for Glass Fibre constructions, ABS, Hardwoods, Aluminum, Stainless-Steel, Brass, Copper, Magnesium and Ceramics/Porcelain. Surfaces already coated with conventional coatings may be “freshened-up” and sealed with a long lasting protective coat. In general, NanoTeK Clear Laque is recommended for use in all areas where the materials or the surfaces to be treated are exposed to aggressive external influences.

Storage At room temperature at least 6 months within unopened original container. Protect from moisture, direct sunlight, heat and frost. Application temperature Ideally room temperature, must be above +5 degrees Celsius

Important notice: This technical information was put together based on the current state of technology and experience. Due to the large variety of surfaces and applications individual testing by the user is necessary and recommended to ensure desired results. For any further information, please do not hesitate to contact your NanoTeK consultant. Future versions of this document will replace all information supplied here. Article Nr.:2CL-001 NanoTeK 2 Component Laque