Kodak S100 EF Flash Capacitor Replacement

Remove the two 6.2mm Phillips screws on both sides of camera's back cover.. Étape 2. Turn camera so the bottom is facing up and the front is facing away.
NAN taille 0 téléchargements 48 vues
Kodak S100 EF Flash Capacitor Replacement

Kodak S100 EF Flash Capacitor Replacement This will guide in replacing the capacitor inside the Kodak S100 EF

Rédigé par: Michelle

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 1 de 5

Kodak S100 EF Flash Capacitor Replacement

INTRODUCTION Back Cover Teardown guide must be used first to get inside the camera. Later, soldering guides will be used.

OUTILS: Phillips #00 Screwdriver (1) Soldering Workstation (1)

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 2 de 5

Kodak S100 EF Flash Capacitor Replacement

Étape 1 — Back Cover



Remove the two 6.2mm Phillips screws on both sides of camera's back cover.

Étape 2

 Turn camera so the bottom is facing up and the front is facing away.

© iFixit — CC BY-NC-SA

fr.iFixit.com



Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.



Back cover is now unscrewed an can be removed.

Page 3 de 5

Kodak S100 EF Flash Capacitor Replacement

Étape 3

 Have the back of the camera facing up. 

Unscrew the 6.2mm Phillips screw next to the viewfinder.



The back cover is now unscrewed. Lift up and pull the cover off evenly.

Étape 4 — Flash Capacitor

 The capacitor is located at the bottom center of the camera.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 4 de 5

Kodak S100 EF Flash Capacitor Replacement

Étape 5 

Desolder the two connections at the top of the flash capacitor.

 If unfamiliar with soldering, refer to the guide How To Solder and Desolder Connections

To reassemble your device, follow these instructions in reverse order. Ce document a été généré pour la dernière fois le 2017-10-18 04:32:40 PM.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 5 de 5