Phase One H 20
Phase One H 20 The ideal solution for replacing 4" x 5" film
Phase One H 20 The ideal solution for replacing 4" x 5" film The ideal single shot direct digital imaging system for high-end advertising studios. With a Phase One® H 20 you will benefit from Phase One's unique digital image processing, which ensures true and saturated colors and crisp details superior to those of film. Also, it employs Kodak's new 4,080 x 4,080 CCD chip, which enables image captures from
High resolution digital system for studio and location use
48MB (24 bit RGB) and up to no less than 128MB (64 bit CMYK).
Image quality superior to 4" x 5" film
You can mount the Phase One H 20 on
Images captured with Phase One H 20 can easily be printed in sizes up to A2
Hasselblad, Mamiya RZ Pro II, and a wide
(16.5" x 23.4") at 300 dpi. Phase Ones patented know-how in software and
range of 4" x 5" view cameras via optional
hardware enables capture of highly detailed, crisp images and true saturated colors.
adapters.
Easy to use
The Phase One H 20 is a highly productive
The single-shot system is as easy to use as film. Using your existing strobe system or
camera, which integrates perfectly with your
ambient light, the Phase One H 20 captures any kind of objects. The entire system
current studio set-up and shooting scenarios.
has been designed for photographers rather than computer operators. The Phase One H 20 enables you to enjoy In the studio or on location
all the advantages a digital workflow provides
The choice is yours. The system works equally well with laptops as with stationary
in terms of immediate image approval, fast
computers. Choose freely between PC or Mac, palm-top, laptop or a standard studio
delivery, reduced film costs, new business
workstation. The camera is connected to the computer with one single IEEE 1394
opportunities, and increased sales.
(FireWire®) cable. Noise-free images The Phase One H 20 only uses power when actually capturing. This results in extremely low power consumption, which is important when shooting on location. Also, the CCD is exposed to very little heating, which ensures images virtually free of noise and completely eliminates the need for cooling the CCD. The Phase One Portable Solution provides you Versatile workflow
with over 6 hours operation and ample storage
The entire system is designed for ICC-based color management. You choose freely
capacity (+300 images) using a pocket size
between the supplied ICC profiles or you can supply your own.
power supply.
Phase One H 20 specifications: Imager Technology:
Full Frame CCD
Color filter:
Red, Green, and Blue
Total pixels: Effective pixels: Effective size:
Exposure time:
16 sec. to faster
Mac:
G4 (min. G3)
than 1/20,000 sec.
RAM:
256 MB
in Bayer pattern
Capture rate:
3 sec. per image
4,145 x 4,128
Burst depth:
Only limited by available hard disk and server capacity
PC:
Pentium III
RAM:
256 MB
(16.6 million)
IR filters:
Mounted on chip
36.9 x 36.9 mm
Interface:
Direct IEEE 1394
Power:
8 - 40 Volt DC
9 x 9 microns 1:1
Antiblooming:
8 f-stops
Digital image 48 bit color
architecture
(min. Mac OS 8.6)
(min. 128 MB) Operating system:
Windows 98SE/Me/2000
Data format & compression
Cameras supported
Extended LightPhase Format, TIFF-RGB,
Hasselblad 555ELD
TIFF-CMYK, JPEG, HTML
Hasselblad 553 ELX
(16 bit per color) Single exposure:
Mac OS 9.1
4,080 x 4,080
Imager ratio:
Dynamic range:
(min. 192 MB) Operating system:
(17.1 million)
Pixels size:
Color depth:
Computer Requirements
System
Hasselblad 503 CW
12 f-stops
Color Management workflows
Hasselblad 501 CM
4,080 x 4,080 pixels
RGB, embedded ICC profiles, CMYK
Mamiya RZ67 Pro II
48 bit RGB: 96 MB
Operating requirements
View cameras (via optional adapters):
64 bit CMYK: 128 MB
Temperature:
0° to 50°C
Arca Swiss, Cambo 23SF, Rollei Xact,
(32° to 122°F)
Linhof M679, Sinar 4” x 5”,
15 to 80 % RH
Linhof 4” x 5”, Arca Swiss 4” x 5”,
(non-condensing)
Toyo 4” x 5”, Horseman 4” x 5”,
24 bit RGB: 48 MB
Two exposures:
7,800 x 4,000 pixels 24 bit RGB: 89 MB
Humidity:
48 bit RGB: 178 MB 64 bit CMYK: 237 MB Image quality:
Original LightPhase
Basic sensitivity ISO range:
50 or 100
Lighting conditions Flash, tungsten, daylight, fluorescent, HMIase
Phase One Roskildevej 39 DK-2000 Frederiksberg Denmark Tel +45 3646 0111 Fax +45 3646 0222 e-mail
[email protected] www.phaseone.com
Phase One 24 Woodbine Ave. Northport, NY 11768 USA Tel (631) 757-0400 Fax (631) 757-2217 e-mail
[email protected] www.phaseone.com
Phase One and LightPhase are registered trademarks of Phase One A/S. All other brands or product names are trademarks or registered trademarks of their respective holders. © 2001 Phase One A/S. All rights reserved. The images were captured with Phase One’s LightPhase. #86653002.
Cambo 4” x 5”, Plaubel 4” x 5” Physical dimensions Height:
99 mm
Certifications
Width:
92 mm
CE
Depth:
53 mm
Weight:
450 g