Gateway SA1 Wireless Card Replacement

The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.. Étape 2. Locate the wireless card on the right.
3MB taille 3 téléchargements 432 vues
Gateway SA1 Wireless Card Replacement

Gateway SA1 Wireless Card Replacement A guide on how to replace a burnt out or broken Wireless card.

Rédigé par: Shawn Cabral

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 1 de 4

Gateway SA1 Wireless Card Replacement

Étape 1 — Wireless Card 

The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.



Locate the wireless card on the right side of the now removed panel.

Étape 2

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 2 de 4

Gateway SA1 Wireless Card Replacement

Étape 3 

Remove the screws in the two possible locations.



After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.

Étape 4

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 3 de 4

Gateway SA1 Wireless Card Replacement

Étape 5 

Pull the card diretly outward from its socket, all while being mindful of the connected wires.



Remove the wired connections by gently pulling them diretly away from the card. Please remember where each one was connected, it will be useful for reconnecting

Étape 6



Reconnect wires to new wireless card and screw back into place.

To reassemble your device, follow these instructions in reverse order. Ce document a été généré pour la dernière fois le 2017-09-25 05:06:04 AM.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 4 de 4