Fonera 2.0n Get Started

Nov 9, 2009 - and type http://fonera or http://192.168.10.1 in the address bar. Enter "admin" if a password is required. □. 1.3.3 You can now follow the wizard ...
78KB taille 122 téléchargements 702 vues
Fonera 2.0n Get Started - FON Wiki Beta

Page 1 sur 4

Fonera 2.0n Get Started From FON Wiki Beta To get started with your brand new Fonera you will need to plug it to your internet access, eventually to update it to the latest firmware and finally to register it (i.e. association of the Fonera with your FON account). If I don't register the La Fonera: You will not get the Linus or Bill status, so you don't have roaming privileges on other FON Spots. In addition the first Fonero logging in your FON Spot, will get the router assigned to his account (and get the roaming instead of you).

Contents ■ 1 Install and Update your Fonera 2.0n ■ 1.1 Connect the Fonera 2.0n to your Internet access ■ 1.2 Check that your Fonera 2.0n can access the Internet ■ 1.3 Update to the latest firmware ■ 2 Register your Fonera 2.0n

Install and Update your Fonera 2.0n Connect the Fonera 2.0n to your Internet access ■ 1.1.1 Connect the Internet port of the Fonera 2.0n to your ADSL/Cable modem or router. ■ 1.1.2 Plug the power cable, and wait about 1 minute so WAN and Wireless LEDs turn on. Fonera 2.0n Ports

Check that your Fonera 2.0n can access the Internet ■ 1.2.1 Check that the Fonera 2.0n power LED is solid. If the LED keeps blinking after a few minutes it means that the Fonera can't connect to the internet. Possible reasons: ■ With some cable modems you will have to do the following

http://wiki.fon.com/wiki/Fonera_2.0n_Get_Started

09/11/2009

Fonera 2.0n Get Started - FON Wiki Beta

Page 2 sur 4

■ In case you have only a DSL modem (not a router) and you normally have to authenticate on your computer to get Internet access (PPPoE), check out this page. ■ If the way your home network is configured requires that you set a static IP, check out this page Fonera 2.0n LEDs

Update to the latest firmware It is strongly advised to update your Fonera 2.0 to the latest firmware (software the Fonera 2.0n) as soon as you receive it, in order to get the latest bug fixes and functionalities. ■ 1.3.1 Connect to the Fonera 2.0 using one of the LAN Ethernet ports, or connecting to the private WiFi signal, named MyPlace (default WPA passphrase is written on the side of your Fonera 2.0n). Make sure you are only Fonera 2.0n Wizard connected to the Fonera (no cable connected to your router while connected through WiFi for example) ■ 1.3.2 Open your browser (Internet Explorer, Firefox (http://www.firefox.com) , Safari, etc.) and type http://fonera or http://192.168.10.1 in the address bar. Enter "admin" if a password is required.

■ 1.3.3 You can now follow the wizard to configure your Fonera. Though all settings will later be accessible from the interface. ■ 1.3.4 Go to the 'Application' menu, default password is 'admin' if you did not change it.

Go to the Applications menu

■ 1.3.5 Click on the "Firmware Upgrade" application.

Last raw on the list

http://wiki.fon.com/wiki/Fonera_2.0n_Get_Started

09/11/2009

Fonera 2.0n Get Started - FON Wiki Beta

Page 3 sur 4

■ 1.3.6 Go back to the Dashboard and click on the "upgrade" icon The upgrade process lasts 5 minutes, during this time do not disconnect the Fonera from its power supply, it might damage its firmware. ■ 1.3.7 When the process is completed the Fonera 2.0n reboots. WAN and Wireless LEDs turn ON. ■ 1.3.8 Connect again to the Fonera 2.0n and visit http://fonera or http://192.168.10.1 to check and configure the new services installed.

Upgrade

Register your Fonera 2.0n ■ 2.1 At the end of the

Enter your FON credential

Fill the registration form

configuration wizard, or on the top part of the dashboard, click on the registration button:

■ 2.2 When clicking on the register button you have to enter your FON credentials (email and password). If you are forwarded to your My FON user zone, logout from fon.com, get back to the Fonera dashboard and click on the register button again.

■ 2.3 After entering your credential, fill out all required fields on the registration form by entering your Country, Region, etc. You can use the map to drag and drop the FON Spot exactly where it is. ■ 2.4 Verify on maps.fon.com (http://maps.fon.com) if your Fonera is shown. If not please redo step 2.3 by dragging it a bit on the map and save again. Also verify if your Fonera spot is

http://wiki.fon.com/wiki/Fonera_2.0n_Get_Started

09/11/2009

Fonera 2.0n Get Started - FON Wiki Beta

Page 4 sur 4

Orange (Router on) instead of Grey (Router Off) to verify if it successfully sends its heartbeat to FON. (This is not the case if you choose NOT to share your Wifi with FON and thus also revoke your free roaming rights) Retrieved from "http://wiki.fon.com/wiki/Fonera_2.0n_Get_Started" Categories: EN | Fonera 2.0n

http://wiki.fon.com/wiki/Fonera_2.0n_Get_Started

09/11/2009