FCC statement This device complies with Part 15 of the FCC Rules
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses ...
FCC statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Warning: Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC. Changes or modifications to product not expressly approved by Logitech, Inc could void your right to use or operate your product by the FCC. Radiation Exposure Statement: The wireless product complies with FCC and IC radiation exposure limits for portable devices. IC statement: CAN ICES‐003 (A) / NMB‐003 Class (A) This device complies with Industry Canada licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cordless (Radio Transmitter) products: RSS‐247 (2.4 GHz transmitters or transceivers): This Category I radio communication device complies with RSS‐247 of Industry Canada. Déclaration IC: CAN ICES‐003 (A) / NMB‐003 Class (A) Ce dispositif est conforme à la norme/aux normes CNR exemptes de licence du Ministère canadien de l'Industrie. Son utilisation est soumise aux deux conditions suivantes: (1) le dispositif concerné ne doit pas causer d'interférences et (2) il doit accepter toute interférence reçue, y compris les interférences risquant d'engendrer un fonctionnement indésirable. Produits sans fil (émetteur radioélectrique): CNR‐247 (émetteurs ou récepteurs 2,4 GHz): Ce dispositif à communication radioélectrique de catégorie I est conforme à la norme CNR‐210 et du ministère canadien de l'Industrie. Déclaration sur la radioexposition Ce produit sans fil est conforme aux limitations prévues par la FCC er I’IC en matiére d’exposition aux radiations des dispositifs portables.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and. (2) This device must accept any interference received, including interference that may
Firstech, LLC. | 2. QUICK START CARD. 1 WAY 4 BUTTON REMOTES. If you have an alarm and optional LED(s) installed, it will flash once a second if armed.
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and. (2) this device must accept any inte
NOTE:The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could ...
This device complies with Part 15 of the FCC Rules. Operation ... to this unit not expressly approved by the party responsible for compliance could void the user's.
This device complies with Part 15 of the FCC Rules / Industry Canada ... If this equipment does cause harmful interference to .... 5.1The Module physical map. 6.
This device complies with Part 15 of the FCC Rules. ... Caution: Any changes or modifications not expressly approved by the party responsible for compliance.
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits ... compliance could void the user's authority to operate the equipment. This device ...
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
FCC/IC Notices. This device complies with Part 15 of FCC. Rules and RSSÐGen of IC Rules. Operation is suEMect to the following two conditions: (1) this device may notcauseäinterference, and. (2) this device must accept any interference, including
1. This device may not cause harmful interference, and 2. This device must accept any ... instructions, may cause harmful interference to radio communications.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that
This device complies with Industry Canada licence-exempt RSS standard(s). Operation ... (e.i.r.p.) is not more than that necessary for successful communication.
Changes or modifications not expressly approved by the party responsible for compliance could void the ... user's manual in accordance FCC & IC requirements.
EN - Compliance with the FCC rules (Part 15) and with RSS-210 rules. This device complies with Industry Canada's licence-exempt RSS-210s, and with Part 15 ...
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouil
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will n
exposure compliance. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. The portable device is designed ...
undesired operation of the device."2.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to ...
compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following ...