Service Manual
DEH-2000R/X1N/EW
ORDER NO.
CRT2312
HIGH POWER CD PLAYER WITH RDS TUNER
DEH-2000R DEH-2030R DEH-2020R
X1N/EW
X1N/EW X1N/GR
- See the separate manual CX-916(CRT2300) for the CD mechanism description, disassembly and circuit description. - The CD mechanism employed in this model is one of S8 series.
CONTENTS 1. 2. 3. 4. 5. 6.
SAFETY INFORMATION ............................................2 EXPLODED VIEWS AND PARTS LIST .......................3 SCHEMATIC DIAGRAM ...........................................14 PCB CONNECTION DIAGRAM ................................38 ELECTRICAL PARTS LIST ........................................48 ADJUSTMENT..........................................................56
7. GENERAL INFORMATION .......................................60 7.1 PARTS .................................................................60 7.1.1 IC................................................................60 7.1.2 DISPLAY ....................................................67 7.2 DIAGNOSIS ........................................................68 7.2.1 DISASSEMBLY .........................................68 7.2.2 TEST MODE ..............................................69 7.3 BLOCK DIAGRAM ..............................................73 8. OPERATIONS AND SPECIFICATIONS.....................75
PIONEER ELECTRONIC CORPORATION
4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE INC. P.O.Box 1760, Long Beach, CA 90801-1760 U.S.A. PIONEER ELECTRONIC [EUROPE] N.V. Haven 1087 Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE.LTD. 253 Alexandra Road, #04-01, Singapore 159936
C PIONEER ELECTRONIC CORPORATION 1998
K-ZZD. DEC. 1998 Printed in Japan
DEH-2000R,2030R,2020R
- CD Player Service Precautions 1. For pickup unit(CXX1285) handling, please refer to"Disassembly"(CX-916 Service Manual CRT2300). During replacement, handling precautions shall be taken to prevent an electrostatic discharge(protection by a short pin).
2. During disassembly, be sure to turn the power off since an internal IC might be destroyed when a connector is plugged or unplugged. 3. Please checking the grating after changing the service pickup unit(see page 58).
1. SAFETY INFORMATION This service manual is intended for qualified service technicians; it is not meant for the casual do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely; you should not risk trying to do so and refer the repair to a qualified service technician. 1. Safety Precautions for those who Service this Unit. • When checking or adjusting the emitting power of the laser diode exercise caution in order to get safe, reliable results. Caution: 1. During repair or tests, minimum distance of 13cm from the focus lens must be kept. 2. During repair or tests, do not view laser beam for 10 seconds or longer. 2. A “CLASS 1 LASER PRODUCT” label is affixed to the bottom of the player.
3. The triangular label is attached to the mechanism unit frame.
CLASS 1 LASER PRODUCT
4. Specifications of Laser Diode Specifications of laser radiation fields to which human access is possible during service. Wavelength = 800 nanometers
2
DEH-2000R,2030R,2020R
2. EXPLODED VIEWS AND PARTS LIST 2.1 PACKING - DEH-2000R/X1N/EW 2 4
3 6
5
9
12
11
1 7
8 13
10
NOTE: - Parts marked by “*” and | can not be supplied. - Screws adjacent to ∇ mark on the product are used for disassembly.
- PACKING SECTION PARTS LIST Mark No. Description *
*
1 2 3 4 5 6 7 8-1 8-2 8-3
Part No.
Cord Assy Accessory Assy Screw Handle Bush
CDE5754 CEA2397 CBA1002 CNC5395 CNV3930
Polyethylene Bag Polyethylene Bag Owner’s Manual Owner’s Manual Owner’s Manual
E36-615 CEG-162 CRD2841 CRD2842 CRD2843
Mark No. Description * *
8-4 8-5 8-6 8-7 9 10 11 12 13
Part No.
Installation Manual Passport Warranty Card Polyethylene Bag Case Assy
CRD2844 CRY1013 CRY1087 CEG1116 CXB3520
Carton Contain Box Protector Protector
CHG3652 CHL3652 CHP2101 CHP2102
- Owner's Manual, Installation Manual Model DEH-2000R/X1N/EW
Part No. CRD2841 CRD2842 CRD2843 CRD2844
Language English, Spanish German, French Italian, Dutch English, Spanish, German, French, Italian, Dutch 3
DEH-2000R,2030R,2020R
- DEH-2030R/X1N/EW
2 4
3 6
5
9
12
11
1 7
8 13
10 - PACKING SECTION PARTS LIST Mark No. Description *
*
1 2 3 4 5 6 7 8-1 8-2 8-3
Part No.
Cord Assy Accessory Assy Screw Handle Bush
CDE5754 CEA2397 CBA1002 CNC5395 CNV3930
Polyethylene Bag Polyethylene Bag Owner’s Manual Owner’s Manual Owner’s Manual
E36-615 CEG-162 CRD2841 CRD2842 CRD2843
Mark No. Description * *
8-4 8-5 8-6 8-7 9 10 11 12 13
Installation Manual Passport Warranty Card Polyethylene Bag Case Assy
CRD2844 CRY1013 CRY1087 CEG1116 CXB3520
Carton Contain Box Protector Protector
CHG3653 CHL3653 CHP2101 CHP2102
- Owner's Manual, Installation Manual Model DEH-2030R/X1N/EW
4
Part No. CRD2841 CRD2842 CRD2843 CRD2844
Part No.
Language English, Spanish German, French Italian, Dutch English, Spanish, German, French, Italian, Dutch
DEH-2000R,2030R,2020R
- DEH-2020R/X1N/GR
2 4
3 6
5
9
12
11
1 7
8 13
10 - PACKING SECTION PARTS LIST Mark No. Description *
*
*
1 2 3 4 5 6 7 8-1 8-2 8-3
Part No.
Cord Assy Accessory Assy Screw Handle Bush
CDE5754 CEA2397 CBA1002 CNC5395 CNV3930
Polyethylene Bag Polyethylene Bag Owner’s Manual Installation Manual Passport
E36-615 CEG-162 CRB1525 CRB1526 CRY1013
Mark No. Description *
8-4 8-5 9 10 11
Warranty Card Polyethylene Bag Case Assy Carton Contain Box
12 Protector 13 Protector
Part No. CRY1087 CEG1116 CXB3520 CHG3654 CHL3654 CHP2101 CHP2102
- Owner's Manual, Installation Manual Model DEH-2020R/X1N/GR
Part No. CRB1525 CRB1526
Language German German
5
DEH-2000R,2030R,2020R
2.2 EXTERIOR - DEH-2000R/X1N/EW
6
DEH-2000R,2030R,2020R
- EXTERIOR SECTION PARTS LIST Mark No. Description 1 2 3 4 5
|
*
Part No.
Mark No. Description
Part No.
Screw Screw Screw Screw Cable
BMZ26P120FMC BSZ26P060FMC BSZ30P060FMC BSZ30P120FMC CDE6018
51 52 53 54 55
Bracket Holder Cover Panel Arm
CNC6791 CNC8042 CNM6276 CNS5188 CNV4692
6 7 8 9 10
Cord Assy Resistor ••••• Cap •••••
CDE5754 RS1/2PMF102J
56 57 58 59 60
Arm Arm Screw Detach Grille Assy Screw
CNV4728 CNV5576 IMS20P030FZK CXB3612 BPZ20P060FMC
11 12 13 14 15
Fuse(10A) Holder Cover Earth Plate Transistor(Q981,991)
CEK1136 CNC6798 CNC8367 CNC8368 2SD2396
61 62 63 64 65
Screw Button(DETACH) Button(+) Button(-) Button(SOURCE)
BPZ20P100FZK CAC5789 CAC5834 CAC5837 CAC5983
16 17 18 19 20
Spacer Insulator Insulator ••••• Tuner Amp Unit
CNM4913 CNM6006 CNM6224 CWM6089
66 67 68 69 70
Button(BAND) Button(1-6) Button(TA,PT) Button(UP,DOWN) Button()
CAC5984 CAC5840 CAC5843 CAC5846 CAC5849
21 22 23 24 25
Screw Screw Screw IC(IC551) Connector(CN551)
ASZ26P080FMC BPZ26P080FMC BSZ26P160FMC PAL005A CDE5996
71 72 73 74 75
Button(F,A) Button(EJECT) Button(EQ) Spring Cover
CAC5852 CAC5853 CAC6132 CBH2210 CNM6290
26 27 28 29 30
Antenna Cable(CN502) Clamper Pin Jack(CN431) Terminal(CN501) Connector(CN951)
CDH1254 CEF1006 CKB1028 CKF1059 CKM1299
76 77 78 79 80
Cover ••••• ••••• ••••• •••••
CNS5187
31 32 33 34 35
Connector(CN681) ••••• Connector(CN651) ••••• Holder
CKS2227
CNC7533
81 82 83 84 85
Housing Keyboard Unit LCD(LCD1801) Connector(CN1801) Holder
CNV5575 CWM6101 CAW1499 CKS3580 CNC8036
36 37 38 39 40
Holder Holder Holder Insulator Heat Sink
CNC8130 CNC8041 CNC8043 CNM5967 CNR1506
86 87 88 89 90
Sheet ••••• CD Mechanism Module Lighting Conductor Connector
CNM6026
41 42 43 44 45
FM/AM Tuner Unit Holder Chassis Unit ••••• •••••
CWE1500 CNC7532 CXB3522
91 92 93 94 95
Grille Unit Case Unit Screw ••••• Cushion
CXB3501 CXB4033 ISS26P055FUC
46 47 48 49 50
Case Assy Button Spring Spring Spring
CXB3520 CAC4836 CBH1835 CBH1996 CBH2208
CNS1472
CKS3581
CXK5200 CNV5570 CNV5571
CNM6373
7
DEH-2000R,2030R,2020R
- DEH-2030R/X1N/EW
8
DEH-2000R,2030R,2020R
- EXTERIOR SECTION PARTS LIST Mark No. Description 1 2 3 4 5
|
*
Part No.
Mark No. Description
Part No.
Screw Screw Screw Screw Cable
BMZ26P120FMC BSZ26P060FMC BSZ30P060FMC BSZ30P120FMC CDE6018
51 52 53 54 55
Bracket Holder Cover Panel Arm
CNC6791 CNC8042 CNM6276 CNS5340 CNV4692
6 7 8 9 10
Cord Assy Resistor ••••• Cap •••••
CDE5754 RS1/2PMF102J
56 57 58 59 60
Arm Arm Screw Detach Grille Assy Screw
CNV4728 CNV5576 IMS20P030FZK CXB3611 BPZ20P060FMC
11 12 13 14 15
Fuse(10A) Holder Cover Earth Plate Transistor(Q981,991)
CEK1136 CNC6798 CNC8367 CNC8368 2SD2396
61 62 63 64 65
Screw Button(DETACH) Button(+) Button(-) Button(SOURCE)
BPZ20P100FZK CAC5929 CAC5832 CAC5835 CAC5983
16 17 18 19 20
Spacer Insulator Insulator ••••• Tuner Amp Unit
CNM4913 CNM6006 CNM6224 CWM6089
66 67 68 69 70
Button(BAND) Button(1-6) Button(TA,PT) Button(UP,DOWN) Button()
CAC5984 CAC5840 CAC5843 CAC5844 CAC5847
21 22 23 24 25
Screw Screw Screw IC(IC551) Connector(CN551)
ASZ26P080FMC BPZ26P080FMC BSZ26P160FMC PAL005A CDE5996
71 72 73 74 75
Button(F,A) Button(EJECT) Button(EQ) Spring Cover
CAC5850 CAC5853 CAC6133 CBH2210 CNM6290
26 27 28 29 30
Antenna Cable(CN502) Clamper Pin Jack(CN431) Terminal(CN501) Connector(CN951)
CDH1254 CEF1006 CKB1028 CKF1059 CKM1299
76 77 78 79 80
Cover ••••• ••••• ••••• •••••
CNS5339
31 32 33 34 35
Connector(CN681) ••••• Connector(CN651) ••••• Holder
CKS2227
CNC7533
81 82 83 84 85
Housing Keyboard Unit LCD(LCD1801) Connector(CN1801) Holder
CNV5575 CWM6099 CAW1499 CKS3580 CNC8036
36 37 38 39 40
Holder Holder Holder Insulator Heat Sink
CNC8130 CNC8041 CNC8043 CNM5967 CNR1506
86 87 88 89 90
Sheet ••••• CD Mechanism Module Lighting Conductor Connector
CNM6026
41 42 43 44 45
FM/AM Tuner Unit Holder Chassis Unit ••••• •••••
CWE1500 CNC7532 CXB3523
91 92 93 94 95
Grille Unit Case Unit Screw ••••• Cushion
CXB3500 CXB4033 ISS26P055FUC
46 47 48 49 50
Case Assy Button Spring Spring Spring
CXB3520 CAC4836 CBH1835 CBH1996 CBH2208
CNS1472
CKS3581
CXK5200 CNV5570 CNV5571
CNM6373
9
DEH-2000R,2030R,2020R
- DEH-2020R/X1N/GR
10
DEH-2000R,2030R,2020R
- EXTERIOR SECTION PARTS LIST Mark No. Description 1 2 3 4 5
|
*
Part No.
Mark No. Description
Part No.
Screw Screw Screw Screw Cable
BMZ26P120FMC BSZ26P060FMC BSZ30P060FMC BSZ30P120FMC CDE6018
51 52 53 54 55
Bracket Holder Cover Panel Arm
CNC6791 CNC8042 CNM6276 CNS5188 CNV4692
6 7 8 9 10
Cord Assy Resistor ••••• Cap •••••
CDE5754 RS1/2PMF102J
56 57 58 59 60
Arm Arm Screw Detach Grille Assy Screw
CNV4728 CNV5576 IMS20P030FZK CXB3609 BPZ20P060FMC
11 12 13 14 15
Fuse(10A) Holder Cover Earth Plate Transistor(Q981,991)
CEK1136 CNC6798 CNC8367 CNC8368 2SD2396
61 62 63 64 65
Screw Button(DETACH) Button(+) Button(-) Button(SOURCE)
BPZ20P100FZK CAC5789 CAC5834 CAC5837 CAC5983
16 17 18 19 20
Spacer Insulator Insulator ••••• Tuner Amp Unit
CNM4913 CNM6006 CNM6224 CWM6087
66 67 68 69 70
Button(BAND) Button(1-6) Button(TA,PT) Button(UP,DOWN) Button()
CAC5984 CAC5840 CAC5843 CAC5846 CAC5849
21 22 23 24 25
Screw Screw Screw IC(IC551) Connector(CN551)
ASZ26P080FMC BPZ26P080FMC BSZ26P160FMC PAL005A CDE5996
71 72 73 74 75
Button(F,A) Button(EJECT) Button(EQ) Spring Cover
CAC5852 CAC5853 CAC6132 CBH2210 CNM6290
26 27 28 29 30
Antenna Cable(CN502) Clamper Pin Jack(CN431) Terminal(CN501) Connector(CN951)
CDH1254 CEF1006 CKB1028 CKF1059 CKM1299
76 77 78 79 80
Cover ••••• ••••• ••••• •••••
CNS5187
31 32 33 34 35
Connector(CN681) ••••• Connector(CN651) ••••• Holder
CKS2227
CNC7533
81 82 83 84 85
Housing Keyboard Unit LCD(LCD1801) Connector(CN1801) Holder
CNV5575 CWM6099 CAW1499 CKS3580 CNC8036
36 37 38 39 40
Holder Holder Holder Insulator Heat Sink
CNC8130 CNC8041 CNC8043 CNM5967 CNR1506
86 87 88 89 90
Sheet ••••• CD Mechanism Module Lighting Conductor Connector
CNM6026
41 42 43 44 45
FM/AM Tuner Unit Holder Chassis Unit ••••• •••••
CWE1503 CNC7532 CXB3522
91 92 93 94 95
Grille Unit Case Unit Screw Earth Plate Cushion
CXB3498 CXB4033 ISS26P055FUC CNC8369 CNM6373
46 47 48 49 50
Case Assy Button Spring Spring Spring
CXB3520 CAC4836 CBH1835 CBH1996 CBH2208
CNS1472
CKS3581
CXK5200 CNV5570 CNV5571
11
DEH-2000R,2030R,2020R
2.3 CD MECHANISM MODULE
12
DEH-2000R,2030R,2020R
- CD MECHANISM MODULE SECTION PARTS LIST Mark No. Description
*
Part No.
Mark No. Description
Part No.
Control Unit Connector(CN802) Connector(CN801) Connector(CN701) Connector(CN101)
CWX2344 CKS2192 CKS2193 CKS2773 CKS3486
46 47 48 49 50
Sheet Ball Belt Roller Arm
CNM6215 CNR1189 CNT1086 CNV4509 CNV5246
6 7 8 9 10
Screw Screw Screw(M2×3) Screw(M2×6) Screw
BMZ20P030FZK BSZ20P040FZK CBA1077 CBA1230 CBA1243
51 52 53 54 55
Arm Arm Arm Guide Guide
CNV5247 CNV5248 CNV5249 CNV5254 CNV5255
11 12 13 14 15
Screw(M2×4) Washer Washer Washer Washer
CBA1362 CBF1037 CBF1038 CBF1060 CBF1075
56 57 58 59 60
Gear Gear Guide Damper Arm
CNV5257 CNV5256 CNV5259 CNV5266 CNV5359
16 17 18 19 20
Spring Spring Spring Spring Spring
CBH2079 CBH2117 CBH2082 CBH2110 CBH2111
61 62 63 64 65
Arm Arm Guide Guide Holder
CNV5360 CNV5361 CNV5509 CNV5510 CNV5578
21 22 23 24 25
Spring Spring Spring Spring Spring
CBH2114 CBH2115 CBH2080 CBH2118 CBH2161
66 67 68 69 70
Guide Clamper Gear Motor Unit(M1) Screw Unit
CNV5751 CNV5758 CNV5813 CXB2190 CXB2191
26 27 28 29 30
Spring Spring Spring Spring Spring
CBH2163 CBH2189 CBH2249 CBH2260 CBH2262
71 72 73 74 75
Chassis Unit Gear Unit Arm Unit Motor Unit(M2) Lever Unit
CXB2192 CXB2193 CXB2194 CXB2195 CXB2553
31 32 33 34 35
Spring Spring Connector Connector Shaft
CBL1367 CBL1369 CDE5531 CDE5532 CLA3304
76 77 78 79 80
Arm Unit Motor Unit(M3) Arm Unit Bracket Unit Screw
CXB2554 CXB2562 CXB2795 CXB4071 JFZ20P025FMC
36 37 38 39 40
Screw(M2.6×6) Frame Frame Lever Arm
CBA1458 CNC7544 CNC7545 CNC7546 CNC7739
81 82 83 84 85
Screw Washer Pickup Unit(Service)(P8) Screw PCB
JGZ17P025FZK YE15FUC CXX1285 IMS26P030FMC CNX2982
41 42 43 44 45
Bracket Plate Spacer Sheet Cushion
CNC7798 CNC8090 CNM3315 CNM6170 CNM6204
1 2 3 4 5
*
86 Photo-transistor(Q1, 2)
CPT230SX-TU
13
2
1
3
4
DEH-2000R,2030R,2020R
3. SCHEMATIC DIAGRAM A
3.1 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)(DEH-2000R/X1N/EW, DEH-2030R/X1N/EW) Note: When ordering service parts, be sure to refer to “EXPLODED VIEWS AND PARTS LIST” or “ELECTRICAL PARTS LIST”.
A-a
A-b
A-a
Large size SCH diagram
4.3V 4.3V 4.3V
A
A-a
A-b
Guide page 4.3V
4.3V
B
SO ELE
4.3V
A-a
Detailed page
B
A-b
ANTENNA CABLE
C
PM4009A
D E
VD REGULATOR
D
14
A 1
2
3
4
5
6
7
8
DEH-2000R,2030R,2020R
A
A-b 4.3V 4.3V
4.3V 4.3V
URCE SELECTOR, ECTRONIC VOLUME
B
RESET
FL+ FLFR+ FRRL+ RL-
C
RR+ RR-
CEK1136
BACK UP
GND
ACC
B.REMOTE
TEL MUTE
BACK UP B.REMOTE GND
ACC
RR-
RR+
FR-
FR+
FL-
FL+
RL-
RL+
D
C
5
6
7
A
8
15
16
A-a
1
A
2 4.3V
4.3V 4.3V
SOURCE SELECTOR, ELECTRONIC VOLUME
A
4.3V
4.3V
4.3V
4.3V
4.3V
4.3V
4.3V
1
B
A-a A-b
DEH-2000R,2030R,2020R
2
B
C
D 3 4
3
4
ANTENNA CABLE
PM4009A
VD REGULATOR
C A-a A-b
5
5
6
6
7
DEH-2000R,2030R,2020R
7
8
A
B
C
D
A-a
8
17
D E
2
1
3
4
A
B
RESET
C
18
A-b 1
V
3V
4.3V
4.3V
D
2
3
4
FR-
FR+
FL-
FL+
A-a A-b
DEH-2000R,2030R,2020R
5
6 B.REMOTE
ACC
GND
BACK UP
7 RL+
FL+
FR+
RR+
7
A-a A-b
RL-
ACC
GND
FL-
B.REMOTE
FR-
RR-
6
BACK UP
TEL MUTE
CEK1136
RR-
RR+
RL-
RL+
FR-
FR+
5
DEH-2000R,2030R,2020R
8
A
B
C
D
A-b
8
19
1
2
3
4
DEH-2000R,2030R,2020R
3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)(DEH-2020R/X1N/GR) A
A-a 4.3V 4.3V 4.3V
A
4.3V
4.3V
B
SOUR ELEC
B
4.3V
ANTENNA CABLE
C
PM4009A
D E
VD REGULATOR
D
20
A 1
2
3
4
5
6
7
8
DEH-2000R,2030R,2020R
A
A-b 4.3V 4.3V
4.3V 4.3V
RCE SELECTOR, TRONIC VOLUME
B
RESET
FL+ FLFR+ FRRL+ RLRR+
C
RR-
CEK1136
BACK UP
GND
ACC
B.REMOTE
TEL MUTE
BACK UP B.REMOTE GND
ACC
RR-
RR+
FR-
FR+
FL-
FL+
RL-
RL+
D
C
5
6
7
A
8
21
22
1
A-a
A
2 4.3V
4.3V 4.3V
SOURCE SELECTOR, ELECTRONIC VOLUME
A
4.3V
4.3V
4.3V
4.3V
4.3V
4.3V
4.3V
1
B
A-a A-b
DEH-2000R,2030R,2020R
2
B
C
D 3 4
3
4
ANTENNA CABLE
PM4009A
VD REGULATOR
C A-a A-b
5
5
6
6
7
DEH-2000R,2030R,2020R
7
8
A
B
C
D
A-a
8
23
D E
24
1
4.3V
A-b
2
E
RESET
A
B
C
D
3
4 FR-
3
FR+
2
FL-
FL+
1
4.3V
4.3V
4.3V
A-a A-b
DEH-2000R,2030R,2020R
4
5
6 B.REMOTE
ACC
GND
BACK UP
7 GND
RL-
FL-
RL+
FL+
FR+
RR+
7
A-a A-b
ACC
B.REMOTE
FR-
RR-
6
BACK UP
TEL MUTE
CEK1136
RR-
RR+
RL-
RL+
FR-
FR+
5
DEH-2000R,2030R,2020R
8
A
B
C
D
A-b
8
25
2
1
3
4
DEH-2000R,2030R,2020R
3.3 FM/AM TUNER UNIT(DEH-2000R/X1N/EW, DEH-2030R/X1N/EW)
A
A
B Voltage of IC Terminals Mark None F0 F65 F125 A0 A74 A125
Band – FM FM FM AM AM AM
Input Level – 0dBf 65dBf 125dBf 0dBµ 74dBµ 125dBµ
KV1410(23)
KV1410(23)
B
C
D
26 1
2
3
4
5
6
7
8
DEH-2000R,2030R,2020R
KV1410(23)
A
B
C
D
27 5
6
7
8
2
1
3
4
DEH-2000R,2030R,2020R
3.4 FM/AM TUNER UNIT(DEH-2020R/X1N/GR)
A
A
B Voltage of IC Terminals Mark None F0 F65 F125
Band – FM FM FM
Input Level – 0dBf 65dBf 125dBf
KV1410(23)
KV1410(23)
B
C
D
28 1
2
3
4
5
6
7
8
DEH-2000R,2030R,2020R
KV1410(23)
A
B
C
D
29 5
6
7
8
2
1
3
4
3
4
DEH-2000R,2030R,2020R
3.5 KEYBOARD UNIT A
KEYBOARD UNIT
A
CN651
C
B
IL1801-1805 DEH-2000R/X1N/EW CEL1549 DEH-2030R/X1N/EW CEL1508 DEH-2020R/X1N/GR
C
D
30
C 1
2
5
7
6
8
DEH-2000R,2030R,2020R
A
B
PD6294A C
D
5
6
7
C 8
31
2
1
3
4
DEH-2000R,2030R,2020R
3.6 CD MECHANISM MODULE A
D
CONTROL UNIT
PICKUP UNIT(SERVICE)
B
C
E
PHOTO UNIT
D
32
D E
1
2
3
4
5
6
7
8
DEH-2000R,2030R,2020R
A
SWITCHES: CONTROL UNIT S801 : HOME SWITCH.....ON-OFF S802 : CLAMP SWITCH....ON-OFF The underlined indicates the switch position.
B
A
CN681
C
D
5
6
7
D
8
33
DEH-2000R,2030R,2020R Note:1. The encircled numbers denote measuring pointes in the circuit diagram. 2. Reference voltage REFO:2.5V
- Waveforms 1 RFI 0.5V/div. 0.5µs/div. Normal mode: play
1 CH1: RFI 1V/div. 0.5ms/div. 2 CH2: MIRR 5V/div. Test mode: Tracking open
1 CH1: RFI 1V/div. 0.5ms/div. 2 CH2: MIRR 5V/div. Normal mode: The defect part passes 800µm
REFO →
REFO →
REFO →
REFO →
REFO →
3 CH1: FD 0.5V/div. 0.2s/div. 4 CH2: FO+ 2V/div. Test mode: No disc, Focus close
3 CH1: FD 0.5V/div. 0.2s/div. 5 CH2: FOK 2V/div. Normal mode: Focus close
6 CH1: FE 0.5V/div. 1ms/div. 7 CH2: XSI 2V/div. Normal mode: Focus close
REFO → REFO →
REFO →
REFO →
REFO →
REFO →
8 CH1: TE 0.5V/div. 0.5ms/div. 9 CH2: TD 0.5V/div. Test mode: 32 tracks jump (REV)
8 CH1: TE 0.5V/div. 0.5ms/div. 9 CH2: TD 0.5V/div. Test mode: Single jump (REV)
GND →
8 CH1: TE 0.5V/div. 5ms/div. 9 CH2: TD 0.5V/div. Test mode: 100 tracks jump (REV)
REFO →
REFO →
REFO →
REFO →
REFO →
REFO →
6 CH1: FE 0.1V/div. 3 CH2: FD 0.2V/div. Normal mode: Play
20ms/div.
3 CH1: FD 0.5V/div. 0.5s/div. 0 CH2: MD 1V/div. Normal mode: Focus close (12cm)
3 CH1: FD 0.5V/div. 0.5s/div. 0 CH2: MD 1V/div. Normal mode: Focus close (8cm)
REFO →
REFO →
REFO →
REFO →
REFO →
REFO →
34
DEH-2000R,2030R,2020R
8 CH1: TE 0.2V/div. 9 CH2: TD 0.2V/div. Normal mode: play
20ms/div.
REFO →
8 CH1: TE 0.5V/div. 5ms/div. ! CH2: SD 0.5V/div. TEST mode: 100 Tracks jump(FWD)
0 MD
0.5V/div.
0.1s/div.
Normal mode: Play (12cm)
REFO → REFO →
REFO →
REFO →
0 MD 1V/div. Normal mode: Long Search (12cm)
10ms/div.
@ EFM
1V/div.
5µs/div.
Normal mode: play
8 CH1: TE 1V/div. 2ms/div. # CH2: TEC 1V/div. Test mode: Focus close Tracking open
REFO → REFO →
REFO → REFO → GND →
8 CH1: TE 0.5V/div. 0.2s/div. 6 CH2: FE 0.5V/div. Normal mode: AGC after focus close
$ PLCK
2V/div.
0.5µs/div.
Normal mode: play
% SCKO
2V/div.
1µs/div.
Normal mode: play
REFO →
REFO →
^ Dout
2V/div.
Normal mode: play
10µs/div.
REFO →
REFO →
GND →
GND →
& LRCK
2V/div.
Normal mode: play
20µs/div.
* VD
5V/div.
50ms/div.
Normal mode: No disc
GND → REFO →
REFO →
GND →
GND →
35
DEH-2000R,2030R,2020R
( CH1: R OUT 1V/div. 0.2ms/div. ) CH2: L OUT 1V/div. Normal mode: Play (1kHz 0dB)
6 CH1: FE 0.2V/div. 1ms/div. 3 CH2: FD 0.5V/div. Normal mode: During AGC
8 CH1: TE 0.2V/div. 1ms/div. 9 CH2: TD 0.5V/div. Normal mode: During AGC
REFO → REFO →
REFO →
REFO →
REFO →
REFO →
1 CH1: RFI 1V/div. 0.5ms/div. ⁄ CH2: HOLD 5V/div. Normal mode: The defect part passes 800µm(B.D)
3 CH1: FD 1V/div. 0.5ms/div. ⁄ CH2: HOLD 5V/div. Normal mode: The defect part passes 800µm(B.D)
9 CH1: TD 0.1V/div. 0.5ms/div. ⁄ CH2: HOLD 5V/div. Normal mode: The defect part passes 800µm(B.D)
REFO →
REFO →
REFO →
REFO →
REFO → REFO →
36
DEH-2000R,2030R,2020R
37
2
1
3
4
3
4
DEH-2000R,2030R,2020R
4. PCB CONNECTION DIAGRAM 4.1 TUNER AMP UNIT NOTE FOR PCB DIAGRAMS 1. The parts mounted on this PCB include all necessary parts for several destination. For further information for respective destinations, be sure to check with the schematic diagram. 2. Viewpoint of PCB diagrams
Connector
A TUNER AMP UNIT
CORD ASSY
A
Capacitor
SIDE A B P.C.Board
Chip Part
SIDE B
D
CN701
C
D
38
A 1
2
5
7
6
8
DEH-2000R,2030R,2020R
A
SIDE A
IP BUS IN
SUB WOOFER/ REAR PREOUT L ch
R ch
ANTENNA CABLE
B
B
C
D
C
CN1801
5
6
7
A 8
39
1
2
3
4
2
3
4
DEH-2000R,2030R,2020R
A
TUNER AMP UNIT
A
B
C
D
40
A 1
5
6
7
8
DEH-2000R,2030R,2020R
SIDE B A
B
C
D
5
6
7
A 8
41
2
1
3
4
DEH-2000R,2030R,2020R
4.2 FM/AM TUNER UNIT
SIDE A
A
A
B
FM/AM TUNER UNIT
C
B
D
42
B 1
2
3
4
1
2
3
4
DEH-2000R,2030R,2020R
SIDE B A
B
FM/AM TUNER UNIT
C
B
D
1
2
3
B 4
43
44
C
1
2
SOURCE
DISPLAY
1
2
3
4
5
6
TA,PGM
B PTY,CLOCK BAND
←
AUDIO
FUNC
2
VOL DOWN
←
EJECT
←
EQ–
EQ+
VOL UP
KEYBOARD UNIT
1
←
D
C
DEH-2000R,2030R,2020R
3
3
4
4.3 KEYBOARD UNIT SIDE A
A
C
4
1
2
3
4
DEH-2000R,2030R,2020R
SIDE B
CN651
A
A
B
KEYBOARD UNIT
C
C
D
1
2
3
C 4
45
46
E
1
D E
2
3
3
CN802
CN681
4.4 CD MECHANISM MODULE
E
2
D
A
M3 SPINDLE MOTOR
M1 CARRIAGE MOTOR M2 LOADING MOTOR
A
3 2 1
REFO
PICKUP UNIT(SERVICE)
1
PHOTO UNIT
F
CONTROL UNIT
C
E
D
DEH-2000R,2030R,2020R
4
SIDE A
B
D
4
1
2
3
4
DEH-2000R,2030R,2020R
SIDE B A
B
D
CONTROL UNIT
C
D
1
2
3
D
4
47
DEH-2000R,2030R,2020R
5. ELECTRICAL PARTS LIST NOTES: - Parts whose parts numbers are omitted are subject to being not supplied. - The part numbers shown below indicate chip components. Chip Resistor RS1/_S___J,RS1/__S___J Chip Capacitor (except for CQS.....) CKS....., CCS....., CSZS..... =====Circuit Symbol and No.===Part Name --- -----------------------------------------------
A
Part No. -------------------------
Unit Number : CWM6089(DEH-2000R/X1N/EW, DEH-2030R/X1N/EW) Unit Name : Tuner Amp Unit
MISCELLANEOUS IC IC IC IC IC
451 551 601 631 701
IC IC IC IC IC
PML003AM PAL005A PE5025A S-80734AN PM4009A
Q Q Q Q Q
431 434 502 507 524
Transistor Transistor Transistor Transistor Transistor
IMH3A DTA124EU 2SC4081 DTA124EU IMH3A
Q Q Q Q Q
525 540 541 542 551
Transistor Transistor Transistor Transistor Transistor
DTA114ES 2SC1740S 2SD1757K 2SD1757K DTC144ES
Q Q Q Q Q
601 651 652 653 701
Transistor Transistor Transistor Transistor Transistor
DTA114ES 2SA933S 2SB1236 DTC124ES DTA124ES
Q Q Q Q Q
921 971 973 981 982
Transistor Transistor Transistor Transistor Transistor
2SA1576 IMX1 2SD1859 2SD2396 IMD2A
Q Q D D D
991 992 651 654 655
Transistor Transistor Diode Diode Network Diode Network
2SD2396 IMD2A MTZ5R6J(C) DA204U DA204U
D D D D D
656 921 931 932 951
Diode Network Diode Diode Diode Diode
DA204U DAN202U 1SR139-400 1SR139-400 1SR139-400
D D D D D
952 971 972 973 974
Diode Diode Diode Diode Diode
1SR139-400 HZS7L(C2) HZS6L(C3) 1SR139-400 HZS6L(B1)
D D L L L
981 992 501 504 506
Diode Diode Ferri-Inductor Ferri-Inductor Inductor
HZS9L(B3) HZS9L(B1) LAU4R7K LAU2R2K LAU100K
L L L L L
601 619 621 651 701
Inductor Ferri-Inductor Ferri-Inductor Ferri-Inductor Ferri-Inductor
LAU100K LAU2R2K LAU2R2K LAU101K LAU101K
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
L L L TH X
702 921 951 601 601
Inductor Ferri-Inductor Choke Coil 600µH Thermistor Radiator 12.58291MHz
LAU100K LAU2R2K CTH1221 CCX1031 CSS1402
X
701
BZ AR
601 501
Crystal Resonator 3.648MHz FM/AM Tuner Unit Buzzer
CSS1447 CWE1500 CPV1050 DSP-201M
RESISTORS
48
R R R R R
421 431 432 437 438
RS1/10S473J RS1/10S821J RS1/10S821J RS1/10S223J RS1/10S223J
R R R R R
443 445 465 466 502
RS1/10S0R0J RS1/8S473J RD1/4PU221J RD1/4PU221J RD1/4PU222J
R R R R R
503 508 509 510 511
RS1/10S222J RS1/10S681J RS1/10S473J RS1/10S681J RS1/10S473J
R R R R R
512 513 514 515 516
RS1/10S681J RS1/8S473J RS1/10S681J RS1/8S473J RS1/10S681J
R R R R R
517 518 519 520 521
RS1/8S472J RS1/10S103J RS1/10S393J RS1/10S681J RS1/10S473J
R R R R R
522 523 526 527 528
RD1/4PU681J RS1/10S473J RS1/10S104J RS1/10S104J RD1/4PU102J
R R R R R
530 531 532 533 534
RS1/10S681J RS1/10S473J RD1/4PU681J RS1/10S473J RS1/10S162J
R R R R R
535 536 537 540 541
RS1/10S162J RS1/10S272J RS1/10S272J RS1/10S224J RS1/10S224J
R R R R R
542 543 544 545 546
RS1/10S224J RS1/10S222J RS1/10S222J RS1/10S223J RS1/10S223J
DEH-2000R,2030R,2020R
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
R R R R R
547 570 579 580 602
RS1/10S472J RD1/4PU103J RS1/10S331J RS1/10S103J RD1/4PU473J
CAPACITORS
R R R R R
603 606 607 608 610
RS1/10S102J RD1/4PU102J RD1/4PU102J RD1/4PU102J RS1/10S222J
R R R R R
611 613 614 615 616
RS1/10S473J RS1/10S0R0J RD1/4PU222J RD1/4PU473J RS1/10S222J
R R R R R
617 618 625 626 627
RS1/10S473J RN1/10SE2002D RS1/10S0R0J RD1/4PU102J RS1/10S473J
R R R R R
631 632 641 651 652
RS1/10S102J RS1/10S822J RD1/4PU102J RS1/10S222J RD1/4PU472J
R R R R R
653 654 655 656 657
RS1/10S222J RD1/4PU222J RD1/4PU222J RD1/4PU222J RS1/10S473J
R R R R R
658 659 660 661 681
RD1/4PU472J RS1/8S472J RD1/4PU302J RS1/10S1R0J RS1/10S681J
R R R R R
682 683 684 704 705
RD1/4PU102J RS1/10S102J RD1/4PU102J RS1/10S102J RD1/4PU102J
R R R R R
706 713 714 716 717
RD1/4PU102J RS1/10S0R0J RD1/4PU102J RS1/10S0R0J RS1/10S225J
R R R R R
718 727 921 923 924
RS1/10S0R0J RD1/4PU681J RS1/10S153J RS1/10S472J RD1/4PU102J
R R R R R
925 971 972 973 974
RS1/10S473J RS1/10S103J RS1/10S473J RS1/10S103J RS1/10S473J
R R R R R
975 976 977 978 979
RS1/10S473J RS1/10S473J RD1/4PU101J RS1/10S472J RS1/10S472J
R R R R R
981 982 987 991 992
RS1/10S1R0J RD1/4PU511J RD1/4PU221J RD1/4PU221J RD1/4PU221J
R R
993 994
RS1/10S472J RS1/10S222J
Part No. -------------------------
C C C C C
431 432 451 452 453
CEJA4R7M35 CEAL4R7M35 CKSYB224K25 CKSYB224K25 CKSYB105K16
C C C C C
454 455 456 457 458
CKSYB105K16 CEJANP4R7M16 CEJANP4R7M16 CKSQYB153K50 CKSQYB153K50
C C C C C
461 462 463 465 466
CEAL470M10 CKSQYB104K25 CEJA100M16 CCSQSL182J50 CCSSL182J50
C C C C C
501 502 503 504 505
CKSQYB103K50 CKSQYB223K50 CKSQYB223K50 CEJA220M10 CKSQYB102K50
C C C C C
506 507 508 509 519
CEAL101M10 CKSQYB473K25 CCSQCH101J50 CKSQYB102K50 CKSQYB472K50
C C C C C
524 525 531 536 537
CEJA1R0M50 CEJA1R0M50 CKSQYB182K50 CKSQYB123K50 CKSQYB123K50
C C C C C
540 551 552 553 554
CKSQYB223K50 CKSYB224K25 CKSYB224K25 CKSYB224K25 CKSYB224K25
C C C C C
556 570 571 572 573
C C C C C
601 602 603 604 605
CCSQCH200J50 CCSQCH200J50 CKSYB105K16 CEJA4R7M35 CCSQCH101J50
C C C C C
607 609 619 621 622
CCSQCH101J50 CCSQCH101J50 CCSQCH101J50 CCSQCH101J50 CCSQCH101J50
C C C C C
631 652 653 701 702
CEJA2R2M50 CEJA4R7M35 CKSQYB473K25 CEAL220M6R3 CKSQYB104K25
C C C C C
711 712 715 717 718
CCSQCH270J50 CCSQCH270J50 CKSQYB104K50 CKSQYB471K50 CKSYB471K50
C C C C C
721 722 971 972 973
CEAL220M6R3 CKSQYB104K25 CCH1331 CKSQYB473K25 CEJA101M10
4700µF/16V
470µF/16V
CCH1328 CEJA100M16 CEJA330M10 CKSYB105K16 CKSYB104K50
49
DEH-2000R,2030R,2020R
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
C C C C C
974 981 982 983 991
CKSQYB473K25 CCH1326 CKSQYB103K50 CEJA101M16 CKSQYB473K25
BZ AR
CPV1050 DSP-201M
C C
992 993
A
330µF/16V
CKSQYB102K50 CEJA101M10
Unit Number : CWM6087(DEH-2020R/X1N/GR) Unit Name : Tuner Amp Unit
MISCELLANEOUS IC IC IC IC IC
451 551 601 631 701
IC IC IC IC IC
PML003AM PAL005A PE5025A S-80734AN PM4009A
Q Q Q Q Q
431 434 502 507 524
Transistor Transistor Transistor Transistor Transistor
IMH3A DTA124EU 2SC4081 DTA124EU IMH3A
Q Q Q Q Q
525 540 541 542 551
Transistor Transistor Transistor Transistor Transistor
DTA114ES 2SC1740S 2SD1757K 2SD1757K DTC144ES
Q Q Q Q Q
601 651 652 653 701
Transistor Transistor Transistor Transistor Transistor
DTA114ES 2SA933S 2SB1236 DTC124ES DTA124ES
Q Q Q Q Q
921 971 973 981 982
Transistor Transistor Transistor Transistor Transistor
2SA1576 IMX1 2SD1859 2SD2396 IMD2A
Q Q D D D
991 992 651 654 655
Transistor Transistor Diode Diode Network Diode Network
2SD2396 IMD2A MTZ5R6J(C) DA204U DA204U
D D D D D
656 921 931 932 951
Diode Network Diode Diode Diode Diode
DA204U DAN202U 1SR139-400 1SR139-400 1SR139-400
D D D D D
952 971 972 973 974
Diode Diode Diode Diode Diode
1SR139-400 HZS7L(C2) HZS6L(C3) 1SR139-400 HZS6L(B1)
D D L L L
981 992 504 506 601
Diode Diode Ferri-Inductor Inductor Inductor
HZS9L(B3) HZS9L(B1) LAU2R2K LAU100K LAU100K
L L L L L
619 621 651 701 702
Ferri-Inductor Ferri-Inductor Ferri-Inductor Ferri-Inductor Inductor
LAU2R2K LAU2R2K LAU101K LAU101K LAU100K
L L TH X X
921 951 601 601 701
Ferri-Inductor Choke Coil Thermistor Radiator 12.58291MHz Crystal Resonator 3.648MHz
LAU2R2K CTH1221 CCX1031 CSS1402 CSS1447
FM/AM Tuner Unit
CWE1503
50
601 501
Buzzer
RESISTORS R R R R R
421 431 432 437 438
RS1/10S473J RS1/10S821J RS1/10S821J RS1/10S223J RS1/10S223J
R R R R R
443 445 465 466 502
RS1/10S0R0J RS1/8S473J RD1/4PU221J RD1/4PU221J RD1/4PU222J
R R R R R
503 508 509 510 511
RS1/10S222J RS1/10S681J RS1/10S473J RS1/10S681J RS1/10S473J
R R R R R
512 513 514 515 516
RS1/10S681J RS1/8S473J RS1/10S681J RS1/8S473J RS1/10S681J
R R R R R
517 518 519 520 521
RS1/8S472J RS1/10S103J RS1/10S393J RS1/10S681J RS1/10S473J
R R R R R
522 523 526 527 528
RD1/4PU681J RS1/10S473J RS1/10S104J RS1/10S104J RD1/4PU102J
R R R R R
530 531 532 533 534
RS1/10S681J RS1/10S473J RD1/4PU681J RS1/10S473J RS1/10S162J
R R R R R
535 536 537 540 541
RS1/10S162J RS1/10S272J RS1/10S272J RS1/10S224J RS1/10S224J
R R R R R
542 543 544 545 546
RS1/10S224J RS1/10S222J RS1/10S222J RS1/10S223J RS1/10S223J
R R R R R
547 570 579 580 602
RS1/10S472J RD1/4PU103J RS1/10S331J RS1/10S103J RD1/4PU473J
R R R R R
603 606 607 608 610
RS1/10S102J RD1/4PU102J RD1/4PU102J RD1/4PU102J RS1/10S222J
R R R R R
611 612 614 615 616
RS1/10S473J RD1/4PU473J RD1/4PU222J RD1/4PU473J RS1/10S222J
R R R R R
617 618 625 626 627
RS1/10S473J RN1/10SE2002D RS1/10S0R0J RD1/4PU102J RS1/10S473J
DEH-2000R,2030R,2020R
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
R R R R R
631 632 641 651 652
RS1/10S102J RS1/10S822J RD1/4PU102J RS1/10S222J RD1/4PU472J
C C C C C
507 508 509 519 524
CKSQYB473K25 CCSQCH101J50 CKSQYB102K50 CKSQYB472K50 CEJA1R0M50
R R R R R
653 654 655 656 657
RS1/10S222J RD1/4PU222J RD1/4PU222J RD1/4PU222J RS1/10S473J
C C C C C
525 531 536 537 540
CEJA1R0M50 CKSQYB182K50 CKSQYB123K50 CKSQYB123K50 CKSQYB223K50
R R R R R
658 659 660 661 681
RD1/4PU472J RS1/8S472J RD1/4PU302J RS1/10S1R0J RS1/10S681J
C C C C C
551 552 553 554 556
CKSYB224K25 CKSYB224K25 CKSYB224K25 CKSYB224K25 CCH1328
R R R R R
682 683 684 704 705
RD1/4PU102J RS1/10S102J RD1/4PU102J RS1/10S102J RD1/4PU102J
C C C C C
570 571 572 573 601
CEJA100M16 CEJA330M10 CKSYB105K16 CKSYB104K50 CCSQCH200J50
R R R R R
706 713 714 716 717
RD1/4PU102J RS1/10S0R0J RD1/4PU102J RS1/10S0R0J RS1/10S225J
C C C C C
602 603 604 605 607
CCSQCH200J50 CKSYB105K16 CEJA4R7M35 CCSQCH101J50 CCSQCH101J50
R R R R R
718 727 921 923 924
RS1/10S0R0J RD1/4PU681J RS1/10S153J RS1/10S472J RD1/4PU102J
C C C C C
609 619 621 622 631
CCSQCH101J50 CCSQCH101J50 CCSQCH101J50 CCSQCH101J50 CEJA2R2M50
R R R R R
925 971 972 973 974
RS1/10S473J RS1/10S103J RS1/10S473J RS1/10S103J RS1/10S473J
C C C C C
652 653 701 702 711
CEJA4R7M35 CKSQYB473K25 CEAL220M6R3 CKSQYB104K25 CCSQCH270J50
R R R R R
975 976 977 978 979
RS1/10S473J RS1/10S473J RD1/4PU101J RS1/10S472J RS1/10S472J
C C C C C
712 715 717 718 721
CCSQCH270J50 CKSQYB104K50 CKSQYB471K50 CKSYB471K50 CEAL220M6R3
R R R R R
981 982 987 991 992
RS1/10S1R0J RD1/4PU511J RD1/4PU221J RD1/4PU221J RD1/4PU221J
C C C C C
722 971 972 973 974
R R
993 994
RS1/10S472J RS1/10S222J
C C C C C
981 982 983 991 992
C
993
CAPACITORS C C C C C
431 432 451 452 453
CEJA4R7M35 CEAL4R7M35 CKSYB224K25 CKSYB224K25 CKSYB105K16
C C C C C
454 455 456 457 458
CKSYB105K16 CEJANP4R7M16 CEJANP4R7M16 CKSQYB153K50 CKSQYB153K50
C C C C C
461 462 463 465 466
CEAL470M10 CKSQYB104K25 CEJA100M16 CCSQSL182J50 CCSSL182J50
C C C C C
502 503 504 505 506
CKSQYB223K50 CKSQYB223K50 CEJA220M10 CKSQYB102K50 CEAL101M10
B
4700µF/16V
470µF/16V
330µF/16V
CKSQYB104K25 CCH1331 CKSQYB473K25 CEJA101M10 CKSQYB473K25 CCH1326 CKSQYB103K50 CEJA101M16 CKSQYB473K25 CKSQYB102K50 CEJA101M10
Unit Number : CWE1503(DEH-2020R/X1N/GR) Unit Name : FM/AM Tuner Unit
MISCELLANEOUS IC IC IC Q Q
1 2 3 1 2
IC IC IC Transistor Transistor
PML002A PM4008A BR9010FV 2SC4081 DTC124EU
Q Q D D D
3 51 1 2 4
FET Transistor Diode Diode Diode
3SK263 2SC4081 KV1410(23) 1SV248 KV1410(23)
51
DEH-2000R,2030R,2020R
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
D D D L L
6 101 903 1 2
Diode Diode Diode Coil Coil
KV1410(23) MA110 KV1410(23) CTC1155 CTC1155
CAPACITORS
L L L L L
3 4 901 904 905
Inductor Coil Coil Inductor Inductor
LCTB100K2125 CTC1155 CTC1154 LCTBR47K1608 LCTBR47K1608
T CF CF CF X
51 51 52 53 901
Coil Ceramic Filter Ceramic Filter Ceramic Filter Crystal Resonator 10.250MHz
CTE1132 CTF1442 CTF1442 CTF1442 CSS1432
RESISTORS
Part No. -------------------------
C C C C C
1 2 4 6 8
CCSQCH5R0C50 CCSRCH5R0C50 CCSRCJ3R0C50 CKSQYB105K10 CKSRYB222K50
C C C C C
10 11 12 14 15
CCSRCH220J50 CCSRCH150J50 CCSRCH8R0D50 CCSRCJ3R0C50 CKSRYB103K50
C C C C C
16 17 18 19 20
CKSRYB222K50 CKSRYB222K50 CCSRCJ3R0C50 CKSRYB103K50 CKSRYB103K50
R R R R R
1 2 6 7 8
RS1/16S153J RS1/16S103J RS1/16S103J RS1/16S273J RS1/16S473J
C C C C C
21 24 31 32 35
CKSRYB103K50 CKSQYB334K16 CKSRYB222K50 CCSRCH470J50 CKSRYB103K50
R R R R R
9 10 11 12 13
RS1/16S223J RS1/16S473J RS1/16S221J RS1/16S103J RS1/16S104J
C C C C C
51 52 53 54 55
CKSRYB103K50 CKSRYB473K16 CCSRCK2R0C50 CKSRYB103K50 CKSRYB104K16
R R R R R
16 17 18 19 20
RS1/16S223J RS1/16S221J RS1/16S221J RS1/16S473J RS1/16S470J
C C C C C
56 58 59 60 101
CKSRYB104K16 CKSQYB224K16 CKSRYB223K25 CKSRYB104K16 CEALNP100M10
R R R R R
51 52 53 54 55
RS1/16S470J RS1/16S103J RS1/16S103J RS1/16S331J RS1/16S331J
C C C C C
102 103 105 106 107
CCSRCH151J50 CKSRYB473K16 CKSRYB682K25 CEAL2R2M50 CKSRYB103K50
R R R R R
56 57 58 59 60
RS1/16S560J RS1/16S560J RS1/16S102J RS1/16S225J RS1/16S133J
C C C C C
108 109 110 111 112
CKSQYB474K16 CKSQYB474K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16
R R R R R
61 62 101 102 103
RS1/16S433J RS1/16S562J RS1/16S333J RS1/16S103J RS1/16S333J
C C C C C
113 114 115 116 117
CKSRYB123K25 CEAL220M6R3 CKSRYB473K16 CEAL2R2M50 CKSRYB102K50
R R R R R
104 106 108 110 111
RS1/16S562J RS1/16S0R0J RS1/16S0R0J RS1/16S154J RS1/16S273J
C C C C C
120 121 122 123 125
CKSRYB153K25 CKSRYB332K50 CKSRYB682K25 CKSRYB681K50 CKSRYB103K50
R R R R R
112 113 114 115 116
RS1/16S223J RS1/16S222J RS1/16S333J RS1/16S334J RS1/16S473J
C C C C C
126 127 128 220 902
CKSRYB103K50 CEAL2R2M50 CKSRYB103K50 CKSRYB104K16 CCSRCH270J50
R R R R R
117 118 122 902 907
RS1/16S333J RS1/16S223J RS1/16S0R0J RS1/16S103J RS1/16S103J
C C C C C
904 905 906 907 913
CKSRYB223K25 CKSRYB103K50 CCSRTH100D50 CCSRTH150J50 CKSRYB223K25
R R
909 914
RS1/16S473J RS1/16S562J
C C C C C
914 915 918 919 920
CKSRYB682K25 CKSQYB223K25 CKSRYB223K25 CKSQYB225K10 CCSRCH270J50
52
DEH-2000R,2030R,2020R
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
C C C
CCSRCH270J50 CKSYB105K16 CKSRYB103K50
R R R R R
56 57 58 59 60
RS1/16S560J RS1/16S560J RS1/16S102J RS1/16S225J RS1/16S133J
R R R R R
61 62 101 102 103
RS1/16S433J RS1/16S562J RS1/16S333J RS1/16S103J RS1/16S333J
R R R R R
104 106 108 110 111
RS1/16S562J RS1/16S0R0J RS1/16S0R0J RS1/16S154J RS1/16S273J
R R R R R
112 113 114 115 116
RS1/16S223J RS1/16S222J RS1/16S333J RS1/16S334J RS1/16S473J
R R R R R
117 118 122 202 203
RS1/16S333J RS1/16S223J RS1/16S0R0J RS1/16S472J RS1/16S225J
R R R R R
204 205 206 208 209
RS1/16S102J RS1/16S220J RS1/16S471J RS1/16S104J RS1/16S104J
R R R R R
210 213 902 904 907
RS1/16S563J RS1/16S223J RS1/16S103J RS1/16S473J RS1/16S103J
R R R
908 909 914
RS1/16S681J RS1/16S473J RS1/16S562J
B
921 922 923
Unit Number : CWE1500(DEH-2000R/X1N/EW, DEH-2030R/X1N/EW) Unit Name : FM/AM Tuner Unit
MISCELLANEOUS IC IC IC Q Q
1 2 3 1 2
IC IC IC Transistor Transistor
PML002A PM4008A BR9010FV 2SC4081 DTC124EU
Q Q Q Q Q
3 51 201 202 204
FET Transistor FET Transistor Transistor
3SK263 2SC4081 2SK932 DTC124EU 2SC4081
D D D D D
1 2 4 6 101
Diode Diode Diode Diode Diode
KV1410(23) 1SV248 KV1410(23) KV1410(23) MA110
D D D D L
201 202 903 904 1
Diode Diode Diode Diode Coil
MA143 MA147 KV1410(23) SVC253 CTC1155
L L L L L
2 3 4 201 202
Coil Inductor Coil Inductor Inductor
CTC1155 LCTB100K2125 CTC1155 LCTB330K1608 CTF1287
L L L L L
203 901 902 904 905
Inductor Coil Inductor Inductor Inductor
LCTA121J3225 CTC1154 LCTA3R3J3225 LCTBR47K1608 LCTBR47K1608
T CF CF CF CF
51 51 52 53 202
Coil Ceramic Filter Ceramic Filter Ceramic Filter Ceramic Filter
CTE1132 CTF1442 CTF1442 CTF1442 CTF1348
X
901
Crystal Resonator 10.250MHz
CSS1432
RESISTORS R R R R R
1 2 6 7 8
RS1/16S153J RS1/16S103J RS1/16S103J RS1/16S273J RS1/16S473J
R R R R R
9 10 11 12 13
RS1/16S223J RS1/16S473J RS1/16S221J RS1/16S103J RS1/16S104J
R R R R R
16 17 18 19 20
RS1/16S223J RS1/16S221J RS1/16S221J RS1/16S473J RS1/16S470J
R R R R R
51 52 53 54 55
RS1/16S470J RS1/16S103J RS1/16S103J RS1/16S331J RS1/16S331J
CAPACITORS C C C C C
1 2 4 6 8
CCSQCH5R0C50 CCSRCH5R0C50 CCSRCJ3R0C50 CKSQYB105K10 CKSRYB222K50
C C C C C
10 11 12 14 15
CCSRCH220J50 CCSRCH150J50 CCSRCH8R0D50 CCSRCJ3R0C50 CKSRYB103K50
C C C C C
16 17 18 19 20
CKSRYB222K50 CKSRYB222K50 CCSRCJ3R0C50 CKSRYB103K50 CKSRYB103K50
C C C C C
21 24 31 32 35
CKSRYB103K50 CKSQYB334K16 CKSRYB222K50 CCSRCH470J50 CKSRYB103K50
C C C C C
51 52 53 54 55
CKSRYB103K50 CKSRYB473K16 CCSRCK2R0C50 CKSRYB103K50 CKSRYB104K16
53
DEH-2000R,2030R,2020R
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
C C C C C
56 58 59 60 101
CKSRYB104K16 CKSQYB224K16 CKSRYB223K25 CKSRYB104K16 CEALNP100M10
C C C C C
102 103 105 106 107
CCSRCH151J50 CKSRYB473K16 CKSRYB682K25 CEAL2R2M50 CKSRYB103K50
C C C C C
108 109 110 111 112
CKSQYB474K16 CKSQYB474K16 CKSRYB104K16 CKSRYB104K16 CKSRYB104K16
C C C C C
113 114 115 116 117
CKSRYB123K25 CEAL220M6R3 CKSRYB473K16 CEAL2R2M50 CKSRYB102K50
C C C C C
120 121 122 123 125
CKSRYB153K25 CKSRYB332K50 CKSRYB682K25 CKSRYB681K50 CKSRYB103K50
C C C C C
126 127 128 201 202
CKSRYB103K50 CEAL2R2M50 CKSRYB103K50 CCSRCH471J50 CCSRCH100D50
C C C C C
203 204 205 206 207
CKSRYB104K16 CKSRYB332K50 CKSRYB103K50 CKSRYB104K16 CKSRYB473K16
C C C C C
208 209 210 211 212
CCSRCH560J50 CEAL470M6R3 CKSRYB103K50 CKSRYB103K50 CCSRCH101J50
C C C C C
215 216 217 219 220
CKSRYB223K25 CKSQYB334K16 CKSRYB103K50 CKSQYB105K10 CKSRYB104K16
C C C C C
221 222 223 224 225
CKSRYB473K16 CKSQYB334K16 CKSQYB474K16 CKSRYB104K16 CKSRYB272K50
C C C C C
226 902 904 905 906
CKSRYB682K25 CCSRCH270J50 CKSRYB223K25 CKSRYB103K50 CCSRTH100D50
C C C C C
907 909 910 912 913
CCSRTH150J50 CCSRTH100D50 CKSRYB332K50 CKSQYB474K16 CKSRYB223K25
C C C C
914 915 916 917 918
CKSRYB682K25 CKSQYB223K25 CKSQYB474K16 CKSYB475K10 CKSRYB223K25
C C C C C
919 920 921 922 923
CKSQYB225K10 CCSRCH270J50 CCSRCH270J50 CKSYB105K16 CKSRYB103K50
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
C
Part No. -------------------------
Unit Number : CWM6101(DEH-2000R/X1N/EW) Unit Name : Keyboard Unit
MISCELLANEOUS IC D D X S
1801 1801 1802 1801 1801
IC Diode Network Diode Network Radiator 5.00MHz Switch
PD6294A DA204U DA204U CSS1423 CSG1110
S S S S S
1802 1803 1804 1805 1806
Switch Switch Switch Switch Switch
CSG1111 CSG1110 CSG1110 CSG1110 CSG1110
S S S S S
1807 1808 1809 1810 1811
Switch Switch Switch Switch Switch
CSG1110 CSG1110 CSG1110 CSG1111 CSG1110
S S S S S
1812 1813 1814 1815 1816
Switch Switch Switch Switch Switch
CSG1111 CSG1110 CSG1111 CSG1111 CSG1111
S S S S S
1817 1818 1819 1820 1821
Switch Switch Switch Switch Switch
CSG1111 CSG1111 CSG1110 CSG1111 CSG1111
S IL IL IL IL
1822 1801 1802 1803 1804
Switch Lamp 14V 40mA Lamp 14V 40mA Lamp 14V 40mA Lamp 14V 40mA
CSG1111 CEL1549 CEL1549 CEL1549 CEL1549
IL 1805 LCD1801
Lamp 14V 40mA LCD
CEL1549 CAW1499
RESISTORS R R R R
1801 1802 1803 1844
RS1/8S222J RS1/8S222J RS1/10S472J RS1/10S103J
CAPACITORS C C C C C
1801 1802 1803 1804 1805
CKSQYB104K50 CEH100M6R3 CKSQYB104K50 CKSQYB104K50 CKSQYB104K50
C
1806
CKSQYB104K50
C
Unit Number : CWM6099(DEH-2030R/X1N/EW, DEH-2020R/X1N/GR) Unit Name : Keyboard Unit
MISCELLANEOUS
54
IC D D X S
1801 1801 1802 1801 1801
IC Diode Network Diode Network Radiator 5.00MHz Switch
PD6294A DA204U DA204U CSS1423 CSG1110
S S S S S
1802 1803 1804 1805 1806
Switch Switch Switch Switch Switch
CSG1111 CSG1110 CSG1110 CSG1110 CSG1110
DEH-2000R,2030R,2020R
=====Circuit Symbol and No.===Part Name --- -----------------------------------------------
Part No. -------------------------
S S S S S
1807 1808 1809 1810 1811
Switch Switch Switch Switch Switch
CSG1110 CSG1110 CSG1110 CSG1111 CSG1110
R R R R R
310 503 504 601 602
RS1/16S473J RA4C681J RS1/16S102J RS1/16S102J RS1/16S102J
S S S S S
1812 1813 1814 1815 1816
Switch Switch Switch Switch Switch
CSG1111 CSG1110 CSG1111 CSG1111 CSG1111
R R R R
603 604 801 802
RS1/16S223J RS1/16S223J RS1/8S751J RS1/8S751J
S S S S S
1817 1818 1819 1820 1821
Switch Switch Switch Switch Switch
CSG1111 CSG1111 CSG1110 CSG1111 CSG1111
S IL IL IL IL
1822 1801 1802 1803 1804
Switch Lamp 14V 40mA Lamp 14V 40mA Lamp 14V 40mA Lamp 14V 40mA
CSG1111 CEL1508 CEL1508 CEL1508 CEL1508
IL 1805 LCD1801
Lamp 14V 40mA LCD
CEL1508 CAW1499
CAPACITORS
RESISTORS R R R R
1801 1802 1803 1844
RS1/8S222J RS1/8S222J RS1/10S472J RS1/10S103J
CAPACITORS C C C C C
1801 1802 1803 1804 1805
CKSQYB104K50 CEH100M6R3 CKSQYB104K50 CKSQYB104K50 CKSQYB104K50
C
1806
CKSQYB104K50
D
Unit Number : CWX2344 Unit Name : Control Unit
MISCELLANEOUS
C C C C C
101 102 103 104 105
CCSRCH102J25 CKSQYB104K16 CEV101M6R3 CEV470M6R3 CKSQYB334K16
C C C C C
106 107 201 202 203
CKSQYB334K16 CKSQYB334K16 CKSQYB104K16 CEV101M6R3 CKSQYB104K16
C C C C C
204 205 206 207 208
CKSRYB332K50 CKSQYB104K16 CKSRYB392K50 CKSQYB224K16 CCSRCH270J50
C C C C C
209 210 211 212 213
CCSRCJ3R0C50 CCSRCH221J50 CCSRCH101J50 CKSQYB682K50 CKSQYB104K16
C C C C C
214 215 216 217 218
CKSQYB104K16 CKSQYB104K16 CKSQYB104K16 CKSQYB104K16 CKSQYB104K16
C C C C C
219 220 301 502 601
CKSQYB104K16 CKSQYB104K16 CEV470M16 CKSRYB471K50 CEV4R7M35 CEV4R7M35 CCSQSL152J50 CCSQSL152J50 CEV220M6R3 CEV101M6R3
IC IC IC IC Q
201 301 601 701 101
IC IC IC IC Transistor
UPD63710GC BA5985FM TA2063F BA05SFP 2SB1132
C C C C C
602 603 604 605 701
D D X S S
801 802 201 801 802
LED LED Ceramic Oscillator 16.934MHz Spring Switch(HOME) Spring Switch(CLAMP)
CL200IRX CL200IRX CSS1456 CSN1051 CSN1052
C C
702 703
RESISTORS
E Q Q
R R R R R
101 102 103 201 205
RS1/8S120J RS1/8S100J RS1/16S222J RS1/16S104J RS1/16S103J
R R R R R
206 207 208 210 212
RS1/16S393J RS1/16S182J RS1/16S304J RS1/16S0R0J RS1/16S103J
R R R R R
213 214 215 216 309
RS1/16S103J RS1/16S123J RS1/16S273J RS1/16S273J RS1/16S473J
22µF/6.3V
CCH1300 CKSQYB334K16
Unit Number : Unit Name : Photo Unit 1 2
Photo-transistor Photo-transistor
CPT230SX-TU CPT230SX-TU
Miscellaneous Parts List M M M
1 2 3
Pickup Unit(Service)(P8) Motor Unit(CARRIAGE) Motor Unit(LOADING) Motor Unit(SPINDLE) Fuse(10A)
CXX1285 CXB2190 CXB2195 CXB2562 CEK1136
55
DEH-2000R,2030R,2020R
6. ADJUSTMENT 6.1 CD ADJUSTMENT 1) Precautions • This unit uses a single power supply (+5V) for the regulator. The signal reference potential, therefore, is connected to REFO(approx. 2.5V) instead of GND. If REFO and GND are connected to each other by mistake during adjustments, not only will it be impossible to measure the potential correctly, but the servo will malfunction and a severe shock will be applied to the pick-up. To avoid this, take special note of the following. Do not connect the negative probe of the measuring equipment to REFO and GND together. It is especially important not to connect the channel 1 negative probe of the oscilloscope to REFO with the channel 2 negative probe connected to GND. Since the frame of the measuring instrument is usually at the same potential as the negative probe, change the frame of the measuring instrument to floating status. If by accident REFO comes in contact with GND, immediately switch the regulator or power OFF. • Always make sure the regulator is OFF when connecting and disconnecting the various filters and wiring required for measurements. • Before proceeding to further adjustments and measurements after switching regulator ON, let the player run for about one minute to allow the circuits to stabilize. • Since the protective systems in the unit's software are rendered inoperative in test mode, be very careful to avoid mechanical and /or electrical shocks to the system when making adjustment. • Disc detection during loading and eject operations is performed by means of a photo transistor in this unit.Consequently, if the inside of the unit is exposed to a strong light source when the outer casing is removed for repairs or adjustment, the following malfunctions may occur. *During PLAY, even if the eject button is pressed,the disc will not be ejected and the unit will remain in the PLAY mode. *The unit will not load a disc. When the unit malfunctions this way, either re-position the light source, move the unit or cover the photo transistor.
56
2) Test Mode This mode is used for adjusting the CD mechanism module of the device. • Test mode starting procedure Reset while pressing the 4 and 6 keys together. • Test mode cancellation Switch ACC, back-up OFF. • After pressing the EJECT key, do not press any other key until the disk is completely ejected. • If the ] or [ key is pressed while focus search is in progress, immediately turn the power off (otherwise the actuator may be damaged due to adhesion of the lenses). • Jump operation of TRs other than 100TR continues after releasing the key. CRG move and 100TR jump operations are brought into the “Tracking close” status when the key is released. • Powering Off/On resets the jump mode to “Single TR (91)”, the RF AMP gain setting to 0 dB, and the automatic adjustment value to the initial value.
DEH-2000R,2030R,2020R
- Flow Chart 4
6 Test Mode In Reset
SOURCE
Sourse CD
New test mode
BAND
TRK
MIN
Power ON (Not adjustment for T.Offset)
SEC
00 00 00
Display
2
3
6 *1
Power ON (Adjustment for T.Offset)
TRK
Display
MIN
SEC
RF AMP Gain Select TRK
99 99 99
MIN
SEC
GG GG GG
Power OFF
BAND
3 Focus Close/ S Curve Check
TRK
MIN
SEC
TRK
Display
MIN
[ *8
*2
Focus Mode Select
91 91 91
Display
]
1
6
TRK
SEC
0x 0x 0x
MIN
SEC
TRK
MIN
MIN
SEC
TRK
MIN
TRK
99 99 99
MIN
SEC
00 00 00
or SEC
*3 Auto Adjustment Display Select
CRG-
00 00 00
or TRK
*8
CRG+
00 00 00
2
or SEC
TRK
99 99 99
MIN
SEC
99 99 99
Power OFF
3
]
[
2
RF AGC Coefficient Display/ Rough Servo and RF AGC
CRG+
CRG-
T.Balance Adjustment
6
1
BAND T.Close and F,T AGC and RF AGC and Fit Servo
T. Close and Fit Servo
TRK
Display
MIN
TRK
SEC
MIN
or
or TRK
MIN
SEC
8x 8x 8x
8x 8x 8x
TRK
SEC
MIN
SEC
9x 9x 9x
9x 9x 9x
Tracking Open
Power OFF
*7
*5
F, T, RF AGC/ F.Bias Display Select
F, T AGC and RF AGC
[
]
6
3
1
BAND
CRG/TR Jump NO. Select
2
*4 CRG-/TR Jump- *4 CRG+/TR Jump+
*6 TRK
Power OFF
Display
TRK
2
+6dB 06 06 06
+12dB 12 12 12
TRK
Display
*2 Display
*3
Focus Close 00 00 00 (99 99 99)
F.Offset Display
SEC
SEC
8x 8x 8x or
S Curve Check 01 01 01
RF.Offset Display
MIN
MIN
9x 9x 9x
Tracking Open
TYP Display
SEC
or
BAND
*1
MIN
8x 8x 8x
TRK
MIN
SEC
9x 9x 9x F.Cansel Display
F.Cancel Value = {Top Rank 8bit of Set Value (7F [H] to 80 [H] ) + 128} / 4 = 63 [D] to (32 [D] ) to 00 [D] *4 Single TR/32TR/100TR *5
Single TR Display 9x(8x):91(81)
32TRK 92(82)
100TRK 93(83)
CRG Move 94(84)
*6 CRG Move, 100TR Jump Only *7
TRK, MIN, SEC
F.AGC Gain
T.AGC Gain
RF AGC Gain
(F,T.AGC Gain = (Present Value/Initial Value) ¥ 20) *8 Voltage of CRG Motor = 2 [V]
57
DEH-2000R,2030R,2020R
6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT • Note : The grating angle of the PU unit cannot be adjusted after the PU unit is changed. The PU unit in the CD mechanism module is adjusted on the production line to match the CD mechanism module and is thus the best adjusted PU unit for the CD mechanism module. Changing the PU unit is thus best considered as a last resort. However, if the PU unit must be changed, the grating should be checked using the procedure below.
• Purpose : To check that the grating is within an acceptable range. • Symptoms of Mal-adjustment : If the grating is off by a large amount symptoms such as being unable to close tracking, being unable to perform track search operations, or track searching taking a long time, may appear. • Method : • Measuring Equipment • Measuring Points • Disc • Mode
• Oscilloscope, Two L.P.F. • E, F, REFOUT • ABEX TCD-784 • TEST MODE CONTROL UNIT
F E
L.P.F. E
REFO
Xch 100kΩ 390pF
REFO
F
Ych
Oscilloscope
100kΩ 390pF
REFO L.P.F.
• Checking Procedure 1. In test mode, load the disc and switch the 5V regulator on. 2. Using the ] and [ buttons, move the PU unit to the innermost track. 3. Press key 3 to close focus, the display should read "91". Press key 2 to implement the tracking balance adjustment the display should now read "81". Press key 3 2 times. The display will change, returning to "81" on the fourth press. 4. As shown in the diagram above, monitor the LPF outputs using the oscilloscope and check that the phase difference is within 75° . Refer to the photographs supplied to determine the phase angle. 5. If the phase difference is determined to be greater than 75° try changing the PU unit to see if there is any improvement. If, after trying this a number of times, the grating angle does not become less than 75° then the mechanism should be judged to be at fault. • Note Because of eccentricity in the disc and a slight misalignment of the clamping center the grating waveform may be seen to "wobble" ( the phase difference changes as the disc rotates). The angle specified above indicates the average angle. • Hint Reloading the disc changes the clamp position and may decrease the "wobble".
58
DEH-2000R,2030R,2020R
Grating waveform
Ech → Xch 20mV/div, AC Fch → Ych 20mV/div, AC
0°
30°
45°
60°
75°
90°
59
DEH-2000R,2030R,2020R
7. GENERAL INFORMATION 7.1 PARTS 7.1.1 IC - Pin Functions (PE5025A) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23,24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42,43 44 45 46 47–50 51 52 53 54 55 56
60
Pin Name DRSYS TELMUTE SYSPW DRELAY TESTIN drst ERROR sk RECIVE TUNPW reset XT2 XT1 VSS X2 X1 REGOFF REGC VDD GRNILM NC adpw NC ASENB ROMDATA ROMCLK MUTE fm/AM LOCL LOCH TUNPCE2 VCK VST VDT tmute ROMCS SD st VSS VDD NC rdslk currq RDT NC swvdd dsens CONT CD5VON NC VDCONT
I/O O I O O I O O I O O I
O O O O O O O O O O O O O O O I I
I O I O I O O O
Function and Operation Door system select output Telephone mute input System power supply control output External relay output Test program mode input RDS reset output RDS disapprove of error correction output RDS SK signal input During RDS data reception output Tuner power control output Reset input Not used (open) Not used (GND) GND Crystal oscillator connection pin Crystal oscillator connection pin Connect to VSS Capacitor for regulator connect pin Power supply Green illumination select output Not used A/D converter power supply output Not used Slave power supply control output ROM correction data output ROM correction clock output System mute output RDS decoder power select output LOCL output LOCH output PLL IC chip enable output Clock output for electronic volume Strobe pulse output for electronic volume Data output for electronic volume Tuner mute output ROM correction chip select output SD input FM stereo input GND Power supply Not used RDS LK signal input Tuner voltage FIX output RDS demodulation data input Not used Keyboard unit power supply control output Grille detach sense input CD server driver power control output CD +5V power control output Not used CD VD power control output
DEH-2000R,2030R,2020R
Pin No. 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71,72 73 74 75 76 77 78 79 80 81 82 83 84 85,86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
Pin Name CDMUTE CDEJET CDLOAD LOCK FOK PCL MIRR clamp xsck XSI XSO XA0 xrst xstb NC TEST SL MODEL1 NL1 SDBW EJTSNS DSCSNS VDSENS TEMP (VDD) (VDD) (GND) NC GND ldet rck RDS57K NC asens bsens TUNPDI KEYDT DPDT TUNPCK TUNPDO TUNPCE PEE
I/O O O O I I O I I O I O O O O I I I I I I I I I
I I I I I I I O O O O O
Function and Operation CD mute control output CD eject control output CD LOAD motor loading control output CD spindle lock input CD focus OK input Clock adjustment output CD mirror detector input CD disc clamp sense input CD LSI clock output CD LSI data input CD LSI data output CD LSI command/data control output CD LSI reset output CD LSI strobe output Not used Test terminal Tuner signal level input Model select input RDS noise level input SD bandwidth input CD disc EJECT position detect CD disc detect input CD VD over voltage / short-circuit sense input CD temperature sense input (CD) A/D converter power supply terminal A/D converter reference voltage terminal A/D converter GND Not used GND RDS PLL lock sense input RDS demodulation clock input RDS 57kHz pulse count input Not used ACC power sense input Back up power sense input PLL IC data input Key data input Display data output PLL IC clock output PLL IC data output PLL IC chip enable Beep tone output
1
30
*PE5025A
50
81 80
100
51
31
IC's marked by* are MOS type. Be careful in handling them because they are very liable to be damaged by electrostatic induction.
61
DEH-2000R,2030R,2020R
- Pin Functions (PD6294A) Pin No. 1 2 3 4 5,6 7 8 9 10 11,12 13-16 17-22 23 24-73 74-77 78 79,80
Pin Name VSS X1 X0 NC MOD1,0 NC KYDT DPDT REMIN NC kd$-kd! KST6-KST1 VDD SEG49-0 COM3-0 VLCD V2,V1
I/O
Function and Operation GND Crystal oscillator connection pin Crystal oscillator connection pin Not used Connect to GND Not used Key data output Display data input Remote control pulse input Not used Key data input Key strobe output VDD LCD segment output LCD common output LCD voltage input Power supply terminal
I O I I I O O O I
BR9010FV 1
20
*PD6294A 21
NC
80
1
VCC
40
8
WC
GND
CS
2 CS : Chip select input 7 SK : Serial data clock input DI : Serial data input DO : Serial data output 3 WC: Write control input 6
SK
4
DI
DO
60
41
61
5
PAL005A
Protector
Mute
Amp2
Mute
Mute
Amp3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
OUT2-
STBY
OUT2+
VCC
OUT1-
P-GND1
OUT1+
SVR
IN1
IN2
S-GND
IN4
IN3
Ac_gnd
OUT3+
P-GND3
OUT3-
VCC
OUT4+
MUTE
OUT4-
P-GND4
Switch_out
Amp4
P-GND2
Amp1
TAB
STBY
62
Mute
DEH-2000R,2030R,2020R
PML003AM VCC
IN1_R
IN2_R
28
27
26
IN3_R IN4+_R IN4-_R 23 25 24
LoudAGND out_R 22
SVin_R
Frontout_R
20
19
21
Rearout_R FIE_R 18
17
STB
DATA
16
15
Isolator circuit FIE Anti Alias filter
Auto-Zero
Primary volume
Anti radiation filter
Fader volume
Treble
Loudness volume
Middle
Bass
Secondary volume
Zero cross detect circuit Digital block
Auto-Zero
Primary volume
Anti Alias filter
Middle
Bass
Zero cross detect circuit
Treble Loudness volume
Fader volume
Anti radiation filter
Secondary volume
FIE Isolator circuit 1
2
3
4
Vref
IN1_L
IN2_L
IN3_L
5
6
IN4+_L IN4-_L
7
8
AGND Loudout_L
9
10
SVin_L Frontout_L
11
12
Rear- FIE_L out_L
13
14
DGND
CLK
PM4009A
63
DEH-2000R,2030R,2020R
- Pin Functions (UPD63710GC) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14, 15 16 17 18 19 20 21 22 23 24 25 26 27 28
64
Pin Name GND HOLD MIRR FOK rst A0 stb sck SO SI VDD DA.VDD NC DA.GND NC DA.VDD R+ RLL+ X.VDD xtal XTAL X.GND VDD EMPH FLAG
I/O I/O I/O O I I I I O I
O O O O O I
O O
29 30 31 32 33 34
DIN DOUT SCKIN SCKO LRCKIN LRCK
I O I O I O
35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
WDCK TX GND C16M LIMIT VDD LOCK RFCK WFCK PLCK GND C1D1 C1D2 C2D1 C2D2 C2D3 VDD PACK TSO TSI tsck TSTB GND TEST
O O O I O O O O O O O O O O O I I I I
Function and Operation Logic circuit GND Defect detection output MIRR output RFOK signal output Reset signal input Command/parameter identification signal input Data strobe signal input Clock signal input for serial data input/output Serial data and status signal output Serial data input Positive power supply terminal to logic circuit Positive power supply terminal to D/A converter Not used D/A converter GND Not used Positive power supply terminal to D/A converter Right channel audio data output Right channel audio data output Left channel audio data output Left channel audio data output Positive power supply terminal to crystal oscillation circuit Crystal oscillator connect pin Crystal oscillator connect pin Crystal oscillation circuit GND Positive power supply terminal to logic circuit Output pin for the pre-emphasis data in the sub-Q code Flag output pin to indicate that audio data currently being output consists of noncorrectable data Serial data input to internal DAC Serial audio data output Serial clock input to internal DAC Audio data that is output from DOUT changes at rising edge of this clock LRCK signal input to internal DAC Signals to distinguish the right and left channels of the audio data output from DOUT Output double the frequency of LRCK Digital audio interface data output Logic circuit GND Oscillator clock buffering output Status of the pin is output at Bit 5 of the status output Positive power supply terminal to logic circuit EFM synchronous detection signal Frame synchronous signal of XTAL-system Frame synchronous signal of PLL-system Monitor pin of bit clock Logic circuit GND Output pin for indicating the C1 error correction results Output pin for indicating the C1 error correction results Output pin for indicating the C2 error correction results Output pin for indicating the C2 error correction results Output pin for indicating the C2 error correction results Positive power supply terminal to logic circuit CD-TEXT PACK synchronous signal CD-TEXT data serial output CD-TEXT control parameter serial input CD-TEXT serial clock input CD-TEXT parameter strobe signal input Logic circuit GND Test pin
DEH-2000R,2030R,2020R
Pin No. 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
Pin Name ATEST RFMODE A.GND FD TD SD MD DACO FBAL TBAL TEVCA A.VDD EFM ASY C3T RFI AGCO AGCI RFO EQ2 EQ1 RFA.GND A C B D F E A.VDD REFOUT FEFEO TETEO TE2 TEC A.GND PD LD PN A.VDD
I/O I/O I
Function and Operation Test pin Use/not use select for internal RF amplifier Analog circuit GND Focus drive output Tracking drive output Sled drive output Spindle drive output DAC output for adjustment DAC output for adjustment DAC output for adjustment DAC output for adjustment Power supply terminal to analog circuit EFM signal output EFM comparator reference voltage input 3T detection capacitor additional pin RF signal input for EFM data regulation RF signal output of after gain adjustment RF-AGC amplifier input RF summing amplifier output RF amplifier equalizer parts additional pin RF amplifier equalizer parts additional pin RF summing amplifier inverted input Analog circuit GND Photo detector A input Photo detector C input Photo detector B input Photo detector D input Photo detector F input Photo detector E input Positive power supply terminal to analog circuit Reference electric potential output Focus error amplifier inverted input Focus error amplifier output Tracking error amplifier inverted input Tracking error amplifier output Tracking error output of after amplification Tracking comparator input Analog circuit GND PD detection signal input for LD output monitor LD control current output APC circuit control polarity set pin Positive power supply terminal to analog circuit
O O O O O O O O O I I O I O
I I I I I I I O I I/O I I/O I/O I I O I
1 1
25 20
*UPD63710GC
50 40
76 61 75 60
80 100
51 41
26 21
65
DEH-2000R,2030R,2020R
- Pin Functions (BA5985FM) Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 BA5985FM
66
Pin Name FWD OPIN1(+) OPIN1(−) OPOUT1 OPIN2(+) OPIN2(−) OPOUT2 VCC VOL(−) VOL(+) VO2(−) VO2(+) VO1(−) VO1(+) VO4(+) VO4(−) VO3(+) VO3(−) GND BIAS MUTE OPOUT3 OPIN3(−) OPIN3(+) OPOUT4 OPIN4(−) OPIN4(+) REV
I/O I I I O I I O O O O O O O O O O O I O I I O I I I
Function and Operation Loading driver FWD input CH1 pre-amplifier input CH1 pre-amplifier inverted input CH1 pre-amplifier output CH2 pre-amplifier input CH2 pre-amplifier inverted input CH2 pre-amplifier output Power supply Loading driver negative output Loading driver positive output Driver CH2 negative output Driver CH2 positive output Driver CH1 negative output Driver CH1 positive output Driver CH4 positive output Driver CH4 negative output Driver CH3 positive output Driver CH3 negative output GND Bias input Mute control CH3 pre-amplifier output CH3 pre-amplifier inverted input CH3 pre-amplifier input CH4 pre-amplifier output CH4 pre-amplifier inverted input CH4 pre-amplifier input Loading driver REV input
DEH-2000R,2030R,2020R
7.1.2 DISPLAY
COMMON
SEGMENT
- CAW1499
67
DEH-2000R,2030R,2020R
7.2 DIAGNOSIS 7.2.1 DISASSEMBLY - Removing the Case Unit(not shown) 1. Remove the Case Unit. - Removing the Panel Assy(Fig.1) Disengage the stoppers at two locations.
Remove the Panel Assy.
- Removing the CD Mechanism Module
(not shown) 1. Remove the four screws. 2.Disconnect the connector, and then remove the CD Mechanism Module.
Panel Assy Fig.1
- Removing the Tuner Amp Unit(Fig.2) Remove the two screws.
Remove the three screws.
Remove the screw.
Straighten the tabs at four locations indicated. Remove the Tuner Amp Unit.
Tuner Amp Unit
68
Fig.2
DEH-2000R,2030R,2020R
7.2.2 TEST MODE - Error Messages If a CD is not operative or stopped during operation due to an error, the error mode is turned on and cause(s) of the error is indicated with a corresponding number. This arrangement is intended at reducing nonsense calls from the users and also for facilitating trouble analysis and repair work in servicing. (1) Basic Indication Method 1) When SERRORM is selected for the CSMOD (CD mode area for the system), error codes are written to DMIN (minutes display area) and DSEC (seconds display area). The same data is written to DMIN and DSEC. DTNO remains in blank as before. 2) Head unit display examples Depending on display capability of LCD used, display will vary as shown below. xx contains the error number. 8-digit display ERROR–xx
6-digit display ERR–xx OR Err–xx
4-digit display E–xx
(2) Error Code List Code Class Displayed error code Description of the code and potential cause(s) 10 Electricity Carriage Home NG CRG can't be moved to inner diameter. CRG can't be moved from inner diameter. → Failure on home switch or CRG move mechanism. 11
Electricity
Focus Servo NG
Focusing not available. → Stains on rear side of disc or excessive vibrations on REWRITABLE.
12
Electricity
Spindle Lock NG
Spindle not locked. Sub-code is strange (not readable). → Failure on spindle, stains or damages on disc, or excessive vibrations.
Subcode NG
A disc not containing CD-R data is found. Turned over disc are found, though rarely. → Failure on home switch or CRG move mechanism.
RF AMP NG
An appropriate RF AMP gain can't be determined. → CD signal error.
17
Electricity
Setup NG
APC protection doesn't work. Focus can be easily lost. → Damages or stains on disc, or excessive vibrations.
30
Electricity
Search Time Out
Failed to reach target address. → CRG tracking error or damages on disc.
A0
System
Power Supply NG
Power (VD) is ground faulted. → Failure on SW transistor or power supply (failure on connector).
Remarks: Mechanical errors are not displayed (because a CD is turned off in these errors). Unreadable TOC does not constitute an error. An intended operation continues in this case. A newly designed head unit must conform to the example given above. Upper digits of an error code are subdivided as shown below: 1x: Setup relevant errors, 3x: Search relevant errors, 3x: Search relevant errors, Ax: Other errors.
69
DEH-2000R,2030R,2020R
- New Test Mode S-CD plays the same way as before. If an error such as off focus, spindle unlocking, unreadable sub-code, or sound skipping occurs after setup, its cause and time occurred (in absolute time) are displayed. During setup, operational status of the control software (internal RAM: CPOINT) is displayed. These displays and functions are prepared for enhancing aging in the servicing and efficiency of trouble analysis. (1) Shifting to the New Test Mode 1 Turn on the current test mode by starting the reset from the key (it varies between the products). 2 Select S-CD for the source through the specified procedure including use of the [SOURCE] key, and inserting the disc. Then, press the [Jump Mode Selector] key while maintaining the regulator turned off. 3 After the above operations, the new test mode remains on irrespective of whether the S-CD is turned on or off. You can reset the new test mode by turning on the reset start. * With some products, the new test mode can be reset through the same operations as that employed for shifting to the STBY mode (while maintaining the Acc turned off). (2) Key Correspondence Key Test mode (Example) Power Off Power On BAND To power on To power off (offset adjustment performed)
In-play –
New test mode Error Production Time/Err.No. switching
]
–
FWD-Kick
FF/TR+
–
[
–
REV-Kick
REV/TR-
–
1
–
Scan
–
2
RF AMP gain switching
T.Close (AGC performed) /parameter display switching Parameter display switching /T.BAL adjustment/T.Open F.Close/RF AGC/F.T.AGC
Mode
–
3
To power on – – (offset adjustment not performed) 6 – F.Mode switching Auto/Manu T.No./Time switching /T.Close (no AGC)/Jump switching Note: Eject and CD on/off is performed in the same procedure as that for the normal mode. (3) Cause of Error and Error Code Code Class Contents 40 Electricity Off focus detected.
Description and cause FOK goes low. → Damages/stains on disc, vibrations or failure on servo.
41
Electricity
Spindle unlocked.
FOK = Low continued for 50 msec. → Damages/stains on disc, vibrations or failure on servo.
42
Electricity
Sub-code unreadable.
Sub-code was unreadable for 50 msec. → Damages/stains on disc, vibrations or failure on servo.
43
Electricity
Sound skipping detected.
Last address memory function was activated. → Damages/stains on disc, vibrations or failure on servo.
Note: Mechanical errors during aging are not displayed. The error codes should be indicated in the same way as in the normal mode.
70
DEH-2000R,2030R,2020R
(4) Display of Operational Status (CPOINT) during Setup Status No. Contents 00 CD+5V ON process in progress. 01 Servo LSI initialization (1/3) in progress. 02 Servo LSI CRAM initialization in progress. 03 Servo LSI initialization (2/3) in progress. 04 Offset adjustment (1/3) in progress. 05 Offset adjustment (2/3) in progress. 06 Offset adjustment (3/3) in progress. 07 FZD adjustment in progress. 08 Servo LSI initialization (3/3) in progress. 10 Carriage move to home position started. 11 Carriage move to home position started. 12 Carriage is moving toward inner diameter. 13
Carriage is moving toward outer diameter.
14 15 20 21 22 23 24 25
Carriage outer kick in progress. Carriage outer diameter feed (1 second) in progress. Servo close started. Pre-processing for focus search started. Spindle rotation and focus search started. Waiting for focus close (XSI=Low). Standing by after focus close is over. Focus search preprocessing is in progress while setup protection is turned on. Focus search preprocessing is in progress while focus recovery is turned on. Wait time after focus close is set up. Standing by after focus close is over. Setup (1/2) before T balance adjustment is started. Setup (2/2) before T balance adjustment is started. T balance adjustment started. T balance adjustment (1/2). T balance adjustment (2/2). Waiting for spindle rotation to end. Spindle rough servo. Standing by after spindle rough servo is over. RF AGC started. RF AGC started. RF AGC ending process in progress. Tracking close in progress. Standing by after tracking is closed. Carriage closing in progress. Focus/tracking AGC started. Focus AGC started. Focus AGC in progress. Tracking AGC in progress. Standing by after focus/tracking AGC are over. Spindle processes applicable servo. Check for servo close is started. Check of LOCK pin started. RF AGC started. RF AGC in progress. Standing by after RF AGC is over.
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Protective action None None None None None None None None None None None Specified 10 seconds has been passed or failure on home switch. Specified 10 seconds has been passed or failure on home switch. None None None None None Specified focus search time has been passed. Specified focus search time has been passed. None None Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus. Off focus or spindle not locked. Off focus. Off focus. Off focus.
71
DEH-2000R,2030R,2020R
(5) Display Examples 1) During Setup (When status no. = 11) TRK No. MIN. SEC. 11 11' 11" 2) During Operation (TOC read, TRK search, Play, FF and REV) The same as in the normal mode. 3) When a Protection Error Occurred Switch to the following displays (A) and (B) using the [BAND] switch: (A) Error occurrence timing display in absolute time. An example: Error occurred in 12th tune at 34'56" in absolute time. TRK No. 12
MIN. 34'
SEC. 56"
(B) Error No. display An example: Error #40 (Off focus is detected) ERROR-40
72
DEH-2000R,2030R,2020R
7.3 BLOCK DIAGRAM - DEH-2000R/X1N/EW, DEH-2030R/X1N/EW A TUNER AMP UNIT
B FM/AM TUNER UNIT
PICKUP UNIT(SERVICE)
D CONTROL UNIT
E PHOTO UNIT
C KEYBOARD UNIT
73
DEH-2000R,2030R,2020R
- DEH-2020R/X1N/GR A TUNER AMP UNIT B FM/AM TUNER UNIT
PICKUP UNIT(SERVICE)
D CONTROL UNIT
E PHOTO UNIT
C KEYBOARD UNIT
74
DEH-2000R,2030R,2020R
8. OPERATIONS AND SPECIFICATIONS 8.1 OPERATIONS
Key Finder Head Unit 5/∞/2/3 buttons Disc loading slot
EJECT button
FUNCTION button +/– button AUDIO button
DETACH button EQ button
Buttons 1 – 6 DISPLAY button SOURCE button
BAND button PTY button TA/NEWS button
75
DEH-2000R,2030R,2020R
Basic Operation To Listen to Music The following explains the initial operations required before you can listen to music. Note: • Loading a disc in this product.
1. Select the desired source (e.g. tuner).
Each press changes the Source ...
7 Head Unit Each press of the SOURCE button selects the desired source in the following order: Built-in CD player = Tuner Note: • The sound source will not change if no disc is set in this product.
2. Raise or lower the volume.
3. Source OFF.
Hold for 1 second or more
76
DEH-2000R,2030R,2020R
Basic Operation Basic Operation of Tuner This product’s AF function can be switched ON and OFF. AF should be switched OFF for normal tuning operations.
Manual and Seek Tuning • You can select the tuning method by changing the length of time you press the 2/3 button. Manual Tuning (step by step)
0.5 seconds or less
Seek Tuning
0.5 seconds or more
Note: • If you continue pressing the button for longer than 0.5 seconds, you can skip broadcast stations. Seek Tuning starts as soon as you stop pressing the button. • “” stereo indicator lights when a stereo station is selected.
Frequency Indicator Preset Number Indicator
Band Indicator
Preset Tuning
Band(EW Model)
• You can memorize broadcast stations in buttons 1 through 6 for easy, one-touch station recall. Preset station recall
2 seconds or less
Broadcast station preset memory
2 seconds or more
FM 1 = FM 2 = FM 3 = MW/LW
Band(GR Model) FM 1 = FM 2 = FM 3
Note: • Up to 18 FM stations (6 in FM1, FM2 and FM3) and 6 MW/LW stations can be stored in memory. • You can also use the 5 or ∞ buttons to recall broadcast stations memorized in buttons 1 through 6.
77
DEH-2000R,2030R,2020R
Basic Operation of Built-in CD Player
Eject Note: • The CD function can be turned ON/OFF with the disc remaining in this product. • Discs left partially inserted after ejection may incur damage or fall out.
Disc Loading Slot The built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing 8 cm CD.
Track Number Indicator
Elapsed Play Time Indicator
Track Search and Fast Forward/Reverse • You can select between Track Search or Fast forward/Reverse by pressing the 2/3 button for a different length of time. Track Search
0.5 seconds or less
Fast forward/Reverse
Continue pressing
Note: • If a disc cannot be inserted fully or playback fails, make sure the recorded side is down. Push the EJECT button and check the disc for damage before reinserting it. • If a CD is inserted with the recorded side up, it will be ejected automatically after a few moments. • If the built-in CD player cannot operate properly, an error message (such as “ERROR-14”) appears on the display.
78
DEH-2000R,2030R,2020R
Audio Adjustment Selecting the Equalizer Curve You can switch between Equalizer curves.
• Move the EQ button up or down to select the desired Equalizer curve.
Equalizer curve
POWERFUL + = NATURAL + = VOCAL + = CUSTOM + = EQ FLAT + = SUPER BASS Note: • “CUSTOM” stores an equalizer curve you have made adjustments to. • You can create different “CUSTOM” curves for different sources.
Entering the Audio Menu With this Menu, you can adjust the sound quality. Note: • After entering the Audio Menu, if you do not perform an operation within about 30 seconds, the Audio Menu is automatically canceled.
1. Select the desired mode in the Audio Menu.
Each press changes the Mode ...
2. Operate a mode. 3. Cancel the Audio Menu.
79
DEH-2000R,2030R,2020R
Audio Adjustment Audio Menu Functions The Audio Menu features the following functions.
Balance Adjustment (FADER) This function allows you to select a Fader/Balance setting that provides ideal listening conditions in all occupied seats.
1. Press the AUDIO button and select Fader/Balance mode (FADER) in the Audio Menu. 2. Adjust front/rear speaker balance with the 5/∞ buttons. “FADER F15” – “FADER R15” is displayed as it moves from front to rear.
3. Adjust left/right speaker balance with the 2/3 buttons. “BAL L 9” – “BAL R 9” is displayed as it moves from left to right. Note: • “FADER 0” is the proper setting when 2 speakers are in use.
Equalizer Curve Adjustment (EQ-LOW/MID/HIGH) You can adjust equalizer curve settings as desired. Adjusted equalizer curve settings are memorized in “CUSTOM”.
1. Press the AUDIO button and select the Equalizer mode (EQ-LOW/MID/HIGH) in the Audio Menu. 2. Select the band you want to adjust with the 2/3 buttons. EQ-LOW + = EQ-MID + = EQ-HIGH
3. Boost or attenuate the selected band with the 5/∞ buttons. The display shows “+6” – “–6”. Note: • If you make adjustments when a curve other than “CUSTOM” is selected, the adjusted curve is stored in memory as a “CUSTOM” curve. Also, the displayed curve switches to that selected before adjustments were made.
80
DEH-2000R,2030R,2020R
Equalizer Curve Fine Adjustment You can adjust the center frequency of each equalizer curve band (LOW/MID/HIGH) and the Q factor (curve characteristics).
Level (dB)
Q=2N Center frequency
Q=2W Frequency (Hz)
1. Press the AUDIO button for 2 or more seconds to select Equalizer Curve Fine Adjustment. 2. Press the AUDIO button to select the desired band for adjustment. 3. Select the desired frequency with the 2/3 buttons. LOW: 40 + = 80 + = 100 + = 160 (Hz) MID: 200 + = 500 + = 1K + = 2K (Hz) HIGH: 3K + = 8K + = 10K + = 12K (Hz)
4. Select the desired Q factor with the 5/∞ buttons. 2N + = 1N + = 1W + = 2W
Loudness Adjustment (LOUD) The Loudness function compensates for deficiencies in the low and high sound ranges at low volume. You can select a desired Loudness level.
1. Press the AUDIO button and select the Loudness mode (LOUD) in the Audio Menu. 2. Switch the Loudness function ON/OFF with the 5/∞ buttons. 3. Select the desired level with the 2/3 buttons. LOW + = MID + = HI
81
DEH-2000R,2030R,2020R
Audio Adjustment Front Image Enhancer Function (FIE) The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their output to low-range frequencies. You can select the frequency you want to cut. Precaution: • When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.
1. Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio Menu. 2. Switch the F.I.E. function ON/OFF with the 5/∞ buttons.
3. Select the desired frequency with the 2/3 buttons. 100 + = 160 + = 250 (Hz) Note: • After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust front and rear speaker volume levels until they are balanced. • Switch the F.I.E. function OFF when using a 2-speaker system.
Source Level Adjustment (SLA) The SLA (Source Level Ajustment) function prevents radical leaps in volume when switching between sources. Settings are based on the FM volume, which remains unchanged. (Since the FM volume is the control, SLA is not possible in the FM modes.) The MW/LW and CD levels can all be adjusted.
1. Compare the FM volume with the volume of the other source. (e.g. Built-in CD player) 2. Press the AUDIO button, and select the SLA mode (SLA) in the Audio Menu. 3. Increase or decrease the level with the 5/∞ buttons. The display shows “+4” – “–4”.
82
4*
5*
Rear output
Red (4*) To electric terminal controlled by ignition switch (12 V DC) ON/OFF.
Red (5*) Accessory (or back-up)
ISO connector Note: In some vehicles, the ISO connector may be divided into two. If this is the case, be sure to connect to both connectors.
Fuse resistor
Fuse
This Product
Fuse resistor Yellow/black If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
Blue To Auto-antenna relay control terminal. (Max. 300 mA 12 V DC.)
Black (ground) To vehicle (metal) body.
Yellow (2*) To terminal always supplied with power regardless of ignition switch position.
Connect leads of the same color to each other.
Antenna jack
Yellow (3*) Back-up (or accessory)
Cap (1*) When not using this terminal, do not remove the cap.
2*
3*
1*
Note: Depending on the kind of vehicle, the function of 3* and 5* may be different. If this is the case, be sure to connect 2* to 5* and 4* to 3*.
≠
+
Speaker leads White : Front left + White/black : Front left ≠ Gray : Front right + Gray/black : Front right ≠ Green : Rear left + Green/black : Rear left ≠ Violet : Rear right + Violet/black : Rear right ≠
Rear speaker
Left
Blue/white To system control terminal of the power amp. (Max. 300 mA 12 V DC.)
≠
+ Rear speaker
Right
Note: The electrical leads of this product may be different colors to the corresponding leads (i.e. the leads that serve the same function) of other products. When connecting this product to another product, please read the instruction manual for each product carefully and then connect each lead of this product to the other product that serves the same function.
Use this for connections when you have the separately available amplifier.
System remote control
Connecting cords with RCA pin plugs (sold separately)
Power amp (sold separately)
DEH-2000R,2030R,2020R
83
DEH-2000R,2030R,2020R
8.2 SPECIFICATIONS - DEH-2000R/X1N/EW, DEH-2030R/X1N/EW
General
CD player
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable) Grounding system ........................................ Negative type Max. current consumption ...................................... 10.0 A Dimensions (mounting size) ...... 178 (W) × 50 (H) × 159 (D) mm (front face) .............. 188 (W) × 58 (H) × 22 (D) mm Weight ...................................................................... 1.4 kg
System .................................... Compact disc audio system Usable discs .................................................. Compact disc Signal format .................... Sampling frequency: 44.1 kHz Number of quantization bits: 16; linear Frequency characteristics .............. 5 – 20,000 Hz (±1 dB) Signal-to-noise ratio ...... 94 dB (1 kHz) (IEC-A network) Dynamic range ............................................ 92 dB (1 kHz) Number of channels ............................................ 2 (stereo)
Amplifier Maximum power output ...................................... 45 W × 4 Continuous power output .................................... 27 W × 4 (DIN45324, +B = 14.4 V) Load impedance .......................... 4 Ω (4 – 8 Ω allowable) Preout maximum output level/ output impedance .................................... 2.2 V/1 kΩ Equalizer (3-Band Parametric Equalizer) (Low) .......................... Frequency: 40/80/100/160 Hz Q Factor: 0.35/0.59/0.95/1.15 (+6 dB when boosted) Level: ±12 dB (Mid) .......................... Frequency: 200/500/1k/2k Hz Q Factor: 0.35/0.59/0.95/1.15 (+6 dB when boosted) Level: ±12 dB (High) ................ Frequency: 3.15k/8k/10k/12.5k Hz Q Factor: 0.35/0.59/0.95/1.15 (+6 dB when boosted) Level: ±12 dB Loudness contour (Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz) (Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz) (High) ................ +11 dB (100 Hz), +11 dB (10 kHz) (volume: –30 dB)
FM tuner Frequency range ...................................... 87.5 – 108 MHz Usable sensitivity .................. 11 dBf (1.0 µV/75 Ω, mono, S/N: 30 dB) 50 dB quieting sensitivity .... 16 dBf (1.7 µV/75 Ω, mono) Signal-to-noise ratio ...................... 70 dB (IEC-A network) Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo) Frequency response ...................... 30 – 15,000 Hz (±3 dB) Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
MW tuner Frequency range ...................................... 531 – 1,602 kHz Usable sensitivity .............................. 18 µV (S/N: 20 dB) Selectivity .................................................. 50 dB (±9 kHz)
LW tuner Frequency range ........................................ 153 – 281 kHz Usable sensitivity .............................. 30 µV (S/N: 20 dB) Selectivity .................................................. 50 dB (±9 kHz)
Note: • Specifications and the design are subject to possible modification without notice due to improvements.
84
DEH-2000R,2030R,2020R
- DEH-2020R/X1N/GR
General
CD player
Power source .......... 14.4 V DC (10.8 – 15.1 V allowable) Grounding system ........................................ Negative type Max. current consumption ...................................... 10.0 A Dimensions (mounting size) ...... 178 (W) × 50 (H) × 159 (D) mm (front face) .............. 188 (W) × 58 (H) × 22 (D) mm Weight ...................................................................... 1.4 kg
System .................................... Compact disc audio system Usable discs .................................................. Compact disc Signal format .................... Sampling frequency: 44.1 kHz Number of quantization bits: 16; linear Frequency characteristics .............. 5 – 20,000 Hz (±1 dB) Signal-to-noise ratio ...... 94 dB (1 kHz) (IEC-A network) Dynamic range ............................................ 92 dB (1 kHz) Number of channels ............................................ 2 (stereo)
Amplifier Maximum power output ...................................... 45 W × 4 Continuous power output .................................... 27 W × 4 (DIN45324, +B = 14.4 V) Load impedance .......................... 4 Ω (4 – 8 Ω allowable) Preout maximum output level/ output impedance .................................... 2.2 V/1 kΩ Equalizer (3-Band Parametric Equalizer) (Low) .......................... Frequency: 40/80/100/160 Hz Q Factor: 0.35/0.59/0.95/1.15 (+6 dB when boosted) Level: ±12 dB (Mid) .......................... Frequency: 200/500/1k/2k Hz Q Factor: 0.35/0.59/0.95/1.15 (+6 dB when boosted) Level: ±12 dB (High) ................ Frequency: 3.15k/8k/10k/12.5k Hz Q Factor: 0.35/0.59/0.95/1.15 (+6 dB when boosted) Level: ±12 dB Loudness contour (Low) .................. +3.5 dB (100 Hz), +3 dB (10 kHz) (Mid) ................ +10 dB (100 Hz), +6.5 dB (10 kHz) (High) ................ +11 dB (100 Hz), +11 dB (10 kHz) (volume: –30 dB)
FM tuner Frequency range ...................................... 87.5 – 108 MHz Usable sensitivity .................. 11 dBf (1.0 µV/75 Ω, mono, S/N: 30 dB) 50 dB quieting sensitivity .... 16 dBf (1.7 µV/75 Ω, mono) Signal-to-noise ratio ...................... 70 dB (IEC-A network) Distortion .......................... 0.3% (at 65 dBf, 1 kHz, stereo) Frequency response ...................... 30 – 15,000 Hz (±3 dB) Stereo separation .......................... 40 dB (at 65 dBf, 1 kHz)
Note: • Specifications and the design are subject to possible modification without notice due to improvements.
85