Brother PT-1010 Cutter Blade Replacement

This guide shows you the process of replacing a blunt or broken cutter blade unit on your PT-1010 device. ... by pressing on the indication arrow and pulling it ...
609KB taille 7 téléchargements 515 vues
Brother PT-1010 Cutter Blade Replacement

Brother PT-1010 Cutter Blade Replacement This guide shows you the process of replacing a blunt or broken cutter blade unit on your PT-1010 device.

Rédigé par: Haley Sweet

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 1 de 3

Brother PT-1010 Cutter Blade Replacement

Étape 1 — Remove Back Cover 

Open the back cover of the device by pressing on the indication arrow and pulling it open.



Locate the yellow cutter blade unit as shown in the photo.

Étape 2 — Locate Cutter Blade Unit

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 2 de 3

Brother PT-1010 Cutter Blade Replacement

Étape 3 — Remove Cutter Blade



Using your thumb and forefinger, pull up, applying a small amount of pressure until the blade loosens and comes out.

 Be very careful when pulling out the cutter blade, it is very sharp.  The Brother no. TL 5 Cutter Blade Unit is required for replacement. To reassemble your device, follow these instructions in reverse order. Ce document a été généré pour la dernière fois le 2017-11-06 11:44:50 PM.

© iFixit — CC BY-NC-SA

fr.iFixit.com

Page 3 de 3