'The Auto Speaker Setup kit is the optional accessories designed for use with ... information from a series of test tones emitted from speakers and can adjust the ...
Speaker Setup kit is the optional accessories designed for use with Sherwood A/V receiver. etc. such as R-965, R-865 and P-965 and includes the microphone preamplifier(SM-S302) and the
microphone(SM-S301)
Note : The illustrations and explanations may differ from rhose of p-965 and R-g65.
r
CONNECTIONS
1. Connect the RCA pin plug and the mini plug of the microphone preamplifier to the SURROUND BACK RIGHT jack of the B cH DlREcr tNs and the DC TRTGGER our jack respectivety.
2' connect the microphone to the SETUp Mlc jack uf ihe microphone preamplifier. Example) ln case of R-965
Notes:
I
Microphone preamplilier (st\r"s302)
N4jcrophone
(st\4-s301)
' Please be cedain that AC input cord of the unit is unplugged before making any connections. ' Do not use other devices except these microphone preamplifier and microfhone. This might damage the devices connected and/or the receiver, and the auio speaker setup will not work correctly. After you have completed the auto speaker setup procedure, disconnect the auto speaker setup kit.
'
I
INSTALLATION
' Place the microphone on a flat level surface at your normal listening position. ' lf possible, use a tripod, etc. to attach the microphone at the same height as your .
you are seated in your listening position. Ensure there are no obstacles between the speakers and the microphone.
r
ears would be when
AUTO SPEAKER SETUP
'Auto Speaker Setup lets you avoid troublesome listening-based speaker setup and achieve good
surround sound. You should connect the auto speaker setup kit to the receiver so that it canânalyze the information from a series of test tones emitted from speakers and can adjust the size, distance and sound level of each speaker automatically.
1. Select the SPEAKER SETUP on the main menu by using the buttons required for OSD menu operation on the remote control.(For details, refer to ',OSD Menu Settings" in ihe operating instructions of the receiver.)
To perform source-level debugging with the IDE, you must configure the Keil 8051 tools to ..... option is not supported with either the EC1 or EC2 Serial Adapters.
The target board is connected to a PC running the Silicon Laboratories IDE via the .... Note: To enable automatic downloading if the program build is successful .... B-12. P0.1. C-12. P0.0. A-13. P7.7. B-13. P7.6. C-13. P7.5. A-14. P7.4. B-14.
To perform source-level debugging with the IDE, you must configure the Keil 8051 ..... board, but the EC1 and EC2 Serial Adapter units cannot provide power to ...
C8051F35x Development Kit User's Guide (this document). 2. ... a program and download the program to the target in preparation for debugging. (The IDE will ...
The target board is connected to a PC running the Silicon Laboratories IDE via the .... Note: To enable automatic downloading if the program build is successful ..... B-12. P0.1. C-12. P0.0. A-13. P7.7. B-13. P7.6. C-13. P7.5. A-14. P7.4. B-14.
The C8051F32x Development Kit contains the following items: .... the watchdog timer (WDT), configuring the Port I/O crossbar, configuring a timer for an interrupt.
less technology Speaker with your Android device. c. For all other Bluetooth® wireless technology enabled devices: i. Follow the instructions that came with your ...
N'installez pas les enceintes sur un plan incliné. • N'installez pas votre ... Bien que ce système soit doté d'un blindage magnétique, il est possible que l'image de ...
SINGLE PAIR DIRECT. ENGAGE WHEN USING ONE PAIR OF LOUDSPEAKERS TH l_l. [. * @@. _ @@. L INPUTS R. L_l l_l ... planned system of impedance matching volume controls, allowing you to get most out of your amplifier. If you are unsure, consult a professio
receipt and register your Zagg Speaker Case on our website (purchases made on our website are automatically registered). Replacement products must be ...
3. Make sure Fan is ON and Bluetooth® wireless technology enabled device is located within 10 meters (approximately 33 feet) of the Speaker/Fan. 4. Pairing your Bluetooth® wireless technology enabled device with the Speaker: a. For iPad/iPhone/iPod
If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information. Q - Warning 1 - Important. ï¬ - Caution _ - Hint. E - Note. B NOTE l3. Do not paint the speaker element. We recommend you
âThis device complies with Industry Canada licence- ... the device." This Class B digital apparatus complies with. Canadian ... Ã la norme NMB-003 du. Canada.
Using your Bluetooth stereo speaker stand. First time pairing (with a new device). 1 Make sure that the speaker stand is fully charged or power adapter is ...
Make sure you have the following items in your package: ⢠the XL-V Smart ... voice service, to provide information, answer questions, play music, read the news, ...
Congratulations on your purchase of the PALMER Speaker Simulator PDI03! Combining a loudspeaker DI, dummy load and signal splitter the PDI03 reissue features all the tones and controls of the original chosen by major guitar players such as Joe Bonama
download from Google Play. Download the app by searching for âNFC Easy. Connectâ or access it by using the following two-dimensional code. Fees may be ...
Nov 5, 2006 - When duplicating or âcloningâ a Digibeta tape, the audio signal (whether ... When the Dolby E data on tape is in sync with video, playback will ...
Important: Please read PRECAUTIONS, this Setup Manual and the User's Manual. (on the CD-ROM) carefully .... Please keep the packaging box and materials for future movement or transport of the monitor. ⢠Monitor. ⢠Power cord ... Green: Operating,
Visit the Apple App Store or Google Play and install the Harmony App. ⢠Launch the app, select the Setup New Remote button, and follow setup instructions. The remainder of setup will be done using your mobile device See next section for an overview
Congratulations on your purchase of the RF-SPX15-T Rocketfish Bluetooth ... speaker provides high-quality music playback from a Bluetooth-compatible device ...
