LINE8 Line 8

Features •

Recessed

• • • • •

8" aperture suits a variety of applications Continuous louver provides a sleek, unbroken appearance Available with flush or recessed trim One, two, or three lamps per cross section Shielding options include parabolic louver, cross baffle, or lens UL listed 1598. cUL or CSA. Damp location listed

Ordering Information

Line 8

–

–

Model Line 8 Line 8

8" × 6"

Row Length 2 3 4 6 8 —

2' Single 3' Single 4' Single 6' Single 8' Single Indicate row length over 8' in 4' increments Note: Rows over 8' will be configured by Alera. Example: 16' will be (2) 8'. Alternate configurations: contact factory.

– Ballast E Electronic, Instant Start

Lamp type & Profile 1T8 1 T8 Lamp 2T8 2 T8 Lamps 3T8 3 T8 Lamps Mounting/Trim Type GFS Grid mounting for 1" inverted T-Bar with F-FA F-RA GFFA GFRA G-RA

flush steel trim Overlap flange for hard ceilings with aluminum flush trim Overlap flange for hard ceilings with regressed aluminum trim Grid ends that sit on T-Bar and flange sides that support ceiling tiles (single fixtures only) with aluminum flush trim Grid ends that sit on T-Bar and flange sides that support ceiling tiles (single fixtures only) with regressed aluminum trim Grid mounting for 1" inverted T-Bar with regressed aluminum twin

– Voltage U 120V-277V 120 120V 277 277V 347 347V

(Std. for T8)

EP Electronic, Programmed Start (Optional for T8)

ED Electronic, Dimming (Must specify)

Unless specified, Alera will use fewest ballasts possible.

Shielding LD LS WCB A12 A19 OA

Options LR Left/Right Switching

Low Iridescent Semi-Specular Louver Low Iridescent Specular Louver White Cross Baffle Pattern 12 Acrylic Lens Pattern 19 Acrylic Lens Opal Acrylic Lens

IBOB GLR GMF EL EMC NLC

(2-Lamp only)2 Inboard/Outboard Switching (3-Lamp only)2 Fast Blow Fuse Slow Blow Fuse One Emergency Battery Pack1, 2 One Emergency Circuit2, 3 Night Light Circuit2, 3

Specify voltage. For additional, specify quantity before nomenclature (Example: 2EL120). Not available with all configurations; some limitations apply. Contact factory for details. 3 One extra feed drop per row for EMC/NLC. For through wiring, contact factory. 1 2

Cross Sections Type GF Fixtures mount on standard exposed tees at end of fixture and support tile at sides. Fits standard 1" wide, 1½" tall tee. Flange End View

Type F for hard ceiling applications. Yoke hangers are shipped separately. Carrier channel by others.

G-FS

9¼" I.D. Carr. Chan. Flush 6"

GF-FA

Type G Lay-in exposed grid. Fits standard 1" wide, 1½" tall tee.

Flush Flange F-FA

6" 6"

5½" Max. 3" Min.

7¾"

8" C-C Tees

8" R.O. 8⅜" O.A. Trim

8" R.O.

9¼" I.D. Carr. Chan.

6"

Regressed Flange

Grid Side View

Regressed G-RA (contact factory) 5¾"

F-RA

8" C-C Tees

8" C-C Tees

7¾"

7⅛" Max. 4¾" Min.

Nominal 8" R.O. 8⅞" O.A. Trim

Name: Test #: Efficiency: LER:

LINE8-2T8-FA-WCB 14556 65.7% 58

Specifications subject to change without notice.