L6

Line 6 Features •

Recessed

• • • • •

6" aperture suits a variety of applications Continuous louver provides a sleek appearance Available with flush or recessed trim One or two-lamp cross sections Shielding options include parabolic louver, cross baffle, or lens UL listed 1598. cUL or CSA. Damp location listed

Ordering Information

L6

–

–

Model L6 Line 6

6" × 6"

Row Length 2 3 4 6 8 —

2' Single 3' Single 4' Single 6' Single 8' Single Indicate row length over 8' in 4' increments Note: Rows over 8' will be configured by Alera. Example: 16' will be (2) 8'. Alternate configurations: contact factory.

Lamp type & Profile 1T8 1 T8 Lamp 2T8 2 T8 Lamps 1T5 1 T5 Lamp4 2T5 2 T5 Lamps4 1T5HO 1 T5HO Lamp4 2T5HO 2 T5HO Lamps4

–

– Ballast E Electronic, Instant Start

Mounting/Trim Type GFS Grid mounting for 1" inverted

(Std. for T8)

T-Bar with flush steel trim

F-FA Overlap flange for hard ceilings

EP Electronic, Programmed

F-RA Overlap flange for hard ceilings

ED Electronic, Dimming

Start (Optional for T8)

with aluminum flush trim

(Must specify)

with regressed aluminum trim

GF-FA Grid ends that sit on T-Bar

and flange sides that support ceiling tiles (single fixtures only) with aluminum flush trim GF-RA Grid ends that sit on T-Bar and flange sides that support ceiling tiles (single fixtures only) with regressed aluminum trim G-RA Grid mounting for 1" inverted T-Bar with regressed aluminum twin

Voltage U 120V-277V 120 120V 277 277V 347 347V

Unless specified, Alera will use fewest ballasts possible.

Shielding LD Low Iridescent Semi-

Options LR Left/Right Switching (2-Lamp only)2

Specular Louver

GLR Fast Blow Fuse GMF Slow Blow Fuse EL One Emergency Battery

LS Low Iridescent WCB A12 A19 OA

Specular Louver White Cross Baffle Pattern 12 Acrylic Lens Pattern 19 Acrylic Lens Opal Acrylic Lens

Pack1, 2

EMC One Emergency Circuit2, 3 NLC Night Light Circuit2, 3

Specify voltage. For additional, specify quantity before nomenclature (Example: 2EL120). Not available with all configurations; some limitations apply. Contact factory for details. 3 One extra feed drop per row for EMC/NLC. For through wiring, contact factory. 4 T5/T5HO Lamp selections are at risk for socket shadowing. 1 2

Cross Sections Type G Lay-in exposed grid. Fits standard 1" wide, 1½" tall tee.

Type F For hard ceiling applications. Yoke hangers are shipped separately. Carrier channel by others.

Flush 6"

G-FS

Flush Flange F-FA

7¼" I.D. Carr. Chan.

Flange End View

6" 5½" Max. 3" Min.

6" C-C Tees 5¾"

Type GF Fixtures mount on standard exposed tees at end of fixture and support tile at sides. Fits standard 1" wide, 1½" tall tee.

6"

GF-FA 6" R.O.

6" R.O. 6⅜" O.A. Trim

Regressed 7¾"

G-RA

Regressed Flange

7¼" I.D. Carr. Chan. Grid Side View

F-RA 7¾" 7" C-C Tees Name: Test #: Efficiency: LER:

132

L6-2T8-FA-WCB 12633 60.3% 55

7⅛" Max. 4¾" Min.

Nominal

6" R.O. 6⅞" O.A. Trim Specifications subject to change without notice.