Activation fonctions Audi A6 (C6 4F facelift depuis fin 2008), dotées d’un MMI 3G (3ème génération) « MMI RADIO » (c’est-à-dire version de base sans GPS) version logicielle B_EU_P0020_D1 Rédigé par « Hurty » Date de création 20/02/10 ; date de dernière mise à jour : 16/04/11 Sources : Audi Forum US, Audizine, Audi Addicts, AP, Audi-Portal + découvertes personnelles par essais successifs.

SOMMAIRE 1) 2) 3) 4)

Configuration du véhicule Codage des calculateurs (scanning avant modifications) Mode opératoire activation fonctions Contenu « Adaptation-10 » des calculateurs Calculateur n° 8 Calculateur n° 9 Calculateur n° 17 Calculateur n° 19 Calculateur n° 46 Calculateur n° 56 Calculateur n° 5F

Pages : 01 à 03 04 à 10 11 à 13 14 à 48 14 à 19 20 à 27 28 à 34 36 à 38 39 à 40 41 à 44 45 à 48

1) Configuration du véhicule : Audi A6 Ambiente 2.0 TDI 170 DPF N° d'identification : WAUZZZ 4F ? AN000??? (plateforme C6 facelift, année modèle 2010) Type : 4F2 (A6 limousine 125 kW) 0ZC (TDI 2.0 boîte M6S) 2212024 Moteur : 2.0 L TDI R4 (4 cylindres diesel turbo injection directe à rampe commune) Puissance : 125 kW (170 ch) Boîte de vitesses : M6S (manuelle 6 vitesses) Mois/année de fabrication : 05/2009 Lettres-repères du moteur : CAHA (montage sur Audi A6 depuis 11/2008) Lettres-repères de la boîte de vitesses : HCK (montage sur Audi A6 depuis 11/2008) N° de peinture : LY9B / LY9B (noir brillant, code A2A2) N° d'équipement intérieur : N2C / GV (tissu Méridien / Gris lumière)

Page 1

Codes "PR-" : N° des options (indenté de 3 espaces = de série) : CW8 : Jantes aluminium coulé 7J x 16 H2 ET35 5/112 style 6 branches D93 : 4-cyl. turbo dies. eng. 2.0 l/125 kW 4V TDI common rail Base engine is TG3/TH3/TL4/TM4/TP4/TU3 E0A : Pas d'édition spéciale F0A : version standard G0K : Boîte manuelle 6 vitesses HR9 : Pneus 205/60 R16 96W J0B : battery 250 A (50 Ah) Q1A : Sièges standards QW1 : Bouton de commande MMI sur console centrale avant TH3 : 4-cylinder turbo diesel engine 2.0 L unit 03L.B U1A : Instrumentation avec éclairage réglable X3A : Réglages de base: France 0G1 : Levier de sélection des vitesses manuel 0JH : Catégorie de poids-essieu av >> plage de poids 8 0M0 : Réservoir de carburant 70 litres 0TD : Tapis de sol en velours avant et arrière 0YF : Weight category rear axle weight range 6 1BA : Suspension et amortisseur STANDARD 1KD : Freins à disque arrière standards 302 x 12 mm 1LG : Freins à disque AV 321 x 30 mm - ATE gauche 11.9606-9953.2 / ATE Droit 11.9606-9954.2 1PD : Ecrous de roue antivol 1N3 : Direction avec assistance asservie à la vitesse (Servotronic) 1S1 : Cric 1SA : Sans plaque de protection supplementaire sous le moteur 1T3 : Triangle de présignalisation et trousse de premiers soins 1X0 : Traction avant 2C5 : Colonne de direction, réglable axialement et verticalement 2K1 : Reinforced bumpers 2Z7 : Suppression de la cylindrée 2ZQ : Volant 4 branches multifonction en cuir 3B4 : Fixations pour siège enfant ISOFIX à l'arrière 3F4 : Roue de secours avec pneu de taille normale 3FA : Pavillon sans découpe (pas de toit ouvrant) 3G2 : Fixations pour siège enfant Isofix sur siège passager avant 3L3 : Sièges avant réglables en hauteur manuellement 3NZ : Dossier de siège arrière rabattable et fractionnable 1/3 2/3 3S0 : Barres de toit, suppression 3Y0 : Sans store à enrouleur 4E5 : Capot de coffre à ouverture automatique 4GP : Pare brise (athermique d'après le catalogue, mais c’est inexact) en verre feuilleté avec bande grise sur la partie supérieure avec fenêtre de visualisation pour n° de châssis 4H5 : Sécurité enfant sur les portières et les vitres arrières (commande électrique) 4K4 : Verrouillage central centralisé avec télécommande avec radiocommande INT et déverrouillage séparé de coffre 4KC : Vitres latérales et arrière (athermiques d'après le catalogue : "wärmeschutzverglasung") teintées vert 4L2 : Rétroviseur intérieur jour/nuit 4R4 : Vitres électriques avec protection anti-pincement 4UF : Airbags conducteur et passager avant avec possibilité désactivation sac gonflable passager 4X3 : Système d'airbags de tête (avant + latéral)

Page 2

4ZB : Pack brillance 5D7 : Verrouillage centralisé avec radiocommande 868 MHz sans touche "panique" 5RU : Rétroviseur extérieur droit convexe (avec champ visuel plus grand) 5SL : Rétroviseur extérieur gauche asphérique grand angle 5TD : Applications décoratives aluminium radial (intérieur) 5XC : Pare-soleil avec miroir de courtoisie éclairé côté conducteur et passager 6E3 : Accoudoir central avant 6SS : Garniture de plancher de coffre à bagages 6XD : Rétroviseurs extérieurs à réglage et dégivrage électriques 6Y8 : Vitesse maximum limitée électroniquement à 250 km/h 7A3 : Lecteur CD 7AA : Protection antidémarrage électronique intégrée à la commande du moteur 7F9 : Pommeau et soufflet de levier de vitesse en cuir / simili-cuir 7K0 : Sans témoin d'alerte de pression des pneus 7M1 : Seuils de porte avec inserts d'aluminium 7MG : Emission gaz d'échappement standard EU5 7Q0 : Sans système de navigation 7X1 : Radar de recul à ultrasons - Parktronic 8BD : Phares halogènes à surfaces libres sous vitre transparente 8DN : MMI radio 8GV : alternator 180A 8N6 : Essuie-glace à balayage intermittent avec détecteur de pluie et capteur de luminosité 8Q1 : Réglage électrique du site des phares 8Rx : Haut-parleurs passifs 8SK : Feux arrière à diodes (LED) 8T1 : Régulateur de vitesse 8Z5 : Refroidissement à eau du moteur version 1 9AK : Climatisation automatique avec réglage asservi à la position du soleil 9P3 : Contrôle de port de ceinture 9Q3 : Indicateur multifonction

Page 3

2) Codage des calculateurs (scanning avant modifications) : Chassis Type: 4F0 VIN: WAUZZZ4F?AN000??? Mileage: ?????km/????miles 01-Engine 03-ABS Brakes 04-Steering Angle 05-Acc/Start Auth. 08-Auto HVAC 09-Cent. Elect. 15-Airbags 16-Steering wheel 17-Instruments 19-CAN Gateway 42-Door Elect, Driver 46-Central Conv. 4F-Centr. Electr. II 52-Door Elect, Pass. 53-Parking Brake 56-Radio 5F-Information Electr. 62-Door, Rear Left 72-Door, Rear Right 76-Park Assist ------------------------------------------------------------------------------Address 01: Engine (J623-CAHA) Labels: 03L-906-022-CAG.clb Part No SW: 03L 906 022 FG HW: 03L 906 022 FG Component: R4 2,0L EDC H01 4397 Revision: 11H01--- Serial number: Coding: 0105002C18072118 Shop #: WSC 02325 785 00200 ASAM Dataset: EV_ECM20TDI03L906022FG A01006 ROD: EV_ECM20TDI03L906022FG.rod ------------------------------------------------------------------------------Address 03: ABS Brakes Labels: 4F0-910-517.lbl Part No SW: 4F0 910 517 AK HW: 4F0 614 517 AT Component: ESP8 front H03 0060 Revision: 00000000 Serial number: 00000000000000 Coding: 0020859 Shop #: WSC 02325 785 00200

Brake Electronics (J104) Coding Trailer Hitch (4F0-910-517-K and above): +0000000 = with Trailer Hitch with Towing Recognition Control Module (J345) +0000001 = ??? +0000002 = ??? +0000004 = ??? +0000008 = ??? +0000016 = ??? +0000032 = ??? +0000064 = ??? +0000128 = ??? +0000256 = ??? +0000512 = ??? +0001024 = ??? +0002048 = ??? +0004096 = ??? +0008192 = ??? +0016384 = with/without Trailer Hitch without Towing Recognition Control Module (J345)

Page 4

------------------------------------------------------------------------------Address 05: Acc/Start Auth. Labels: 4F0-910-852.lbl Part No SW: 4F0 910 852 B HW: 4F0 905 852 D Component: FBSAUDIC6 ELV H05 0100 Revision: 00H05000 Serial number: 10602601318640 Coding: 0000001 Shop #: WSC 02323 785 00200 Access/Start Authorization (J518) Coding Part No: 4F0 910 132 D Component: FBSAUDIC6 EZS H03 0020 Part No: 4F0 910 220 D Component: FBSAUDIC6 IDG H01 0040

+001 - Standard (Coding Check) +002 - Automatic Transmission +004 - Advanced Key +008 - North American Region (USA/Canada) +016 - Right Hand Steering (RHD) +032 - Performance Reduction (Japan/South Korea) +064 - Special Vehicles +128 - Avant

------------------------------------------------------------------------------Address 08: Auto HVAC Labels: 4F0-910-043.lbl Part No SW: 4F0 910 043 HW: 4F1 820 043 T Component: KLIMABETAETIGUNGH20 0170 Revision: 00000033 Serial number: 00000030440351 Coding: 0000020 Shop #: WSC 02325 785 00200

Climate Control (J255) Coding +000004 = 4-Cylinder Engine +000006 = 6-Cylinder Engine +000008 = 8-Cylinder Engine +000016 = Diesel Engine +000032 = Country: USA +000064 = Country: Japan and China +000096 = Country: Rest of World (Alternative) +000256 = Avant (Wagon) +001024 = Vehicle with Right-Hand Drive +002048 = Auxiliary Heater (Factory) installed +004096 = Sunroof with Solar Cells installed +008192 = Electric Rear Roller Blind installed +524288 = FSI-Engine

------------------------------------------------------------------------------Address 09: Cent. Elect. Labels: 4F0-910-279.lbl Component: ILM Fahrer H22 0320 Revision: 00000000 Serial number: 4F0907279 Central Electronics (J519) Coding Coding: 0008122 0?xxxxx: Steering Column Memory Shop #: WSC 02256 785 00200 0 = Steering Column Memory not installed or manual Steering Column Part No: 4F1 910 113 D Component: Wischer AudiC6 H10 0040 Coding: 00056595 Shop #: WSC 02256 Part No: 8K0 910 557 Component: REGENLICHTSENSORH04 0003 Coding: 00146221 Shop #: WSC 02256

1 = Steering Column Memory installed 0x?xxxx: Footwell Lightning 0 = Light Bulbs 1 = LEDs 0xx?xxx: Headlight Type 0 = Halogen Headlights w/o Headlight Washer System 1 = Halogen Headlights with Headlight Washer System 2 = Bi-Xenon Headlights 3 = Bi-Xenon Headlights with Advanced Front-Lighting System (AFS) 4 = Bi-Xenon Headlights w/o Headlight Washer System 5 = LED Daytime Running Lights with Headlight Washer System 6 = LED Daytime Running Lights w/o Headlight Washer System 7 = ??? 8 = ??? 0xxx?xx: Automatic Driving Light 0 = w/o Automatic Driving Light (Auto) 1 = with Automatic Driving Light (Auto) with Rain/Light Sensor (G397) 2 = with High Beam Assist 0xxxx?x: Daytime Running Lights 0 = w/o Daytime Running Lights 1 = with Daytime Running Lights (not selectable via MMI) 2 = with Daytime Running Lights (selectable via MMI) 0xxxxx?: Country 1 = Rest of World (RoW) 2 = Northern European Countries (Sweden/Finland/Norway/Denmark) 3 = USA 4 = Canada

Page 5

------------------------------------------------------------------------------Address 15: Airbags (J234) Labels: 4F0-910-655-10.clb Part No SW: 4F0 910 655 L HW: 4F0 959 655 E Component: Airbag AU1042 H06 0090 Revision: -------- Serial number: 003CH004SKNL Coding: 30314236303630303031554A304C34463053 Shop #: WSC 02323 785 00200 ASAM Dataset: EV_Airba10AURB4 001001 ROD: EV_Airba10AURB4.rod ------------------------------------------------------------------------------Address 16: Steering wheel Labels: 4F0-910-549.lbl Part No SW: 4F0 910 549 A HW: 4F0 953 549 D Component: J0527 0530 Revision: 00H05000 Serial number: 90026090690004 Coding: 0002021 Shop #: WSC 02323 785 00200 Part No: XXXXXXXXXXX Component: E0221 H02 0030

Steering Wheel Electronics (J527) Coding 0?xxxxx: Model 0 = Left Hand Steering 1 = Right Hand Steering 0x?xxxx: Steering Column Adjustment +1 = Electric Steering Column Adjustment +2 = Lane Departure Warning 0xx?xxx: Steering Wheel 0 = Standard Steering Wheel 1 = Sport Steering Wheel 2 = Multi-Function Steering Wheel 0xxx?xx: Tiptronic & Heating +1 = with Tiptronic +2 = with Steering Wheel Heating 0xxxx?x: Board Computer / Cruise Control System (CCS) / Adaptive Cruise Control (ACC) 0 = No Board Computer - No Cruise Control System (CCS) - No Adaptive Cruise Control (ACC) 1 = with Board Computer 2 = with Cruise Control System (CCS) 3 = with Adaptive Cruise Control (ACC) 4 = with Board Computer and Cruise Control System (CCS) 5 = with Board Computer and Adaptive Cruise Control (ACC) 0xxxxx?: Chassis 1 = Sedan 2 = Avant (with Rear Wiper)

------------------------------------------------------------------------------Address 17: Instruments (J285) Labels: 4F0-920-xxx-17.clb Part No SW: 4F0 920 901 N HW: 4F0 920 901 N Byte 0 ; bits 0-1 : 03 = Illumination : Needles ON and Scales ON Byte 0 ; bits 2-4 : 0C = Seat Belt Warning Rest of World (ReW) Component: KOMBIINSTR. H06 0138 active Revision: 00100000 Serial number: BGI26R659 Byte 0 ; bit 5 : Right-Hand-Drive (RHD) Byte 0 ; bit 6 : Speed Warning at 120 kph (75 mph) active Coding: 0F60090502000008030100 Byte 0 ; bit 7 : Brake System Warning Light North American Shop #: WSC 02391 823 56573 Region (NAR) OR Australia (AUS) active

Byte 1 ; bit 0 : Gauge Test/Needle Sweep active Byte 1 ; bit 1 : Engine Start Note (i.e. "Press Clutch to Start Engine") Byte 1 ; bit 2 : Driver Information System (DIS) active Byte 1 ; bit 3 : Lap Timer active Byte 1 ; bit 4 : Washer Fluid Warning active Byte 1 ; bit 5 : Shift Suggestion (Economy) active Byte 1 ; bit 6 : Multi Media Interface Generation 3 (MMI 3G) installed Byte 1 ; bit 7 : Key Warning active Byte 4 ; bit 0 : Tire Pressure Monitoring (TPMS) installed Byte 4 ; bit 1 : Electro Mechanical Parking Brake (EPB) installed Byte 4 ; bit 2 : Adaptative Cruise Control (ACC) installed Byte 4 ; bit 3 : Adaptative Light (Swivelling Headlights) installed Byte 4 ; bit 4 : Dynamic Ride Control (DRC) installed Byte 4 ; bit 5 : Dynamic Steering installed

Byte 2 ; bits 0-2 : 01 = Fuel Tank : Front-Wheel-Drive (FWD) with 70 L Tank Byte 2 ; bits 3-7 : 08 = Model : Audi A6/S6 (4F) Limousine/Sedan

Byte 3 ; bits 0-2 : 05 = Tire Circumference : Audi A6 (4F) Byte 3 ; bit 7 : Wheel Speed Error Counter active

Byte 5 ; bit 0 : Adaptative Air Suspension installed

Page 6

Byte 6 ; bit 0 : Temperature Display (0 = Celsius / 1 = Fahrenheit) Byte 6 ; bit 1 : Distance Display (0 = Kilometers / 1 = Miles) Byte 6 ; bit 2 : Speed Display (0 = km/h / 1 = mph) Byte 6 ; bits 3-4 : 00 = Pressure Dispaly : bar Byte 6 ; bits 5-6 : 00 = Fuel Volume Display : Liter Byte 6 ; bit 7 : Time Display (0 = 24 h / 1 = 12 h AM/PM)

Byte 7 ; bits 0-1 : 00 = Date Display : dd/mm/yyyy Byte 7 ; bits 2-3 : 08 = Consumption Display : L/100 km Byte 8 ; bits 0-4 : 03 = French Byte 8 ; bit 7 : Special Characters allowed

Byte 9 ; bits 0-7 : 01 = Country : Rest of World (RoW) / Left-Hand-Drive (LHD)

Byte 10 ; bit 0 : Brake Pad Wear Warning active

------------------------------------------------------------------------------Address 19: CAN Gateway (J533) Labels: 4F0-907-468.clb Part No SW: 4F0 907 468 M HW: 4F0 907 468 F Component: GW-BEM 4CAN-M H06 0030 Revision: LA900026 Serial number: 2600L0943080E6 Coding: 000B03 Shop #: WSC 02391 823 56573 Part No SW: 8K0 915 181 C HW: 8K0 915 181 C Component: J367-BDM H07 0107 ------------------------------------------------------------------------------Address 42: Door Elect, Driver (J386) Labels: 4F0-959-793.clb Part No SW: 4F0 959 793 R HW: 8K0 959 793 D Component: TSG FA H11 0250 Revision: Serial number: 0000101076073 Coding: 011C06204040410001 Shop #: WSC 02391 823 56573 ------------------------------------------------------------------------------Comfort System (J393) Coding Address 46: Central Conv. Labels: 4F0-910-289.lbl +0000001 = Reserved (always) Part No SW: 4F0 910 289 M HW: 4F0 907 289 M +0000002 = 10 Tamper Alarms (PR-B09) Component: Komfortgeraet H29 0250 +0000004 = Thatcham inactive (PR-7AA/A8U) Revision: 02500029 Serial number: 01177699080000 +0000008 = Selective Central Locking (PR-4K2/4K7/4K8) +0000016 = Anti-Theft Warning System (PR-7AN/7AL) Coding: 0131205 +0000032 = Inclination Sensor installed (PR-7AN/7AL) Shop #: WSC 02256 785 00200 +0000064 = Interior Monitoring (PR-7AL) +0000128 = Comfort Function via Remote (NOT PRB29/B30/B34/B35) +0000256 = Right Hand Steering (PR-L0R) +0000512 = Avant (PR-K8D) +0001024 = Electrical Rear Shades installed (PR3Y2/3Y5) +0002048 = Confirmation Anti-Theft System via Horn (PR-A8U) +0004096 = SAE Rear Lights (PR-A8U) +0008192 = Light Package (PR-QQ1) +0016384 = SAFE-Function deactivated (PR-A8U) +0065536 = No Anti-Theft Delay (0 Seconds) +0131072 = Highline (LED Rear Lights) +0262144 = Sunroof (PR-3FE/3FR) +0524288 = Multi Function Module (PRF0X/F4E/F4F/F4G/F4J/F4Q/F4X/F4Z/F5F) +1048576 = Luggage Compartment Closing Assistance (PR-4E7/4E9) +2097152 = Rear Lid Control Module (PR-4E7/4E9) +4194304 = Fuel Lid Unlock via Driver Door Button

Page 7

------------------------------------------------------------------------------Address 4F: Centr. Electr. II Labels: 4F0-910-280.lbl Central Electronics II (J520) Coding 00?xxxx: Engine Type I Part No SW: 4F0 910 280 HW: 4F0 907 280 0 = Other Engine Types / Audi A6 (4F) Component: ILM Beifahrer H13 0100 1 = 8/10-Cylinder Gasoline Engine / Audi A6 (4F) 00x?xxx: Country Revision: Serial number: 00000000460927 +1 = Rest of World (RoW) Coding: 0001004 +2 = North American Region (NAR) Shop #: WSC 02323 785 00200 00xx?xx: Options I +1 = Inclination Sensor installed 00xxx?x: Options II 0 = Sunroof NOT installed (PR-3FA/3FL) OR Open-SkySystem (OSS) installed (PR-3FU) 1 = Sunroof installed (PR-3FE/3FR) / ONLY Audi A6 (4F) 00xxxx?: Engin Type II 1 = All Engine Types / ONLY Audi Q7 (4L) 3 = 6-Cylinder Diesel Engine / ONLY Audi A6 (4F) 4 = Other Engine Types / ONLY Audi A6 (4F)

------------------------------------------------------------------------------Address 52: Door Elect, Pass. (J387) Labels: 4F0-959-792.clb Part No SW: 4F0 959 792 R HW: 8K0 959 792 D Component: TSG BF H11 0250 Revision: Serial number: 0000101058423 Coding: 011C06204040410001 Shop #: WSC 02391 823 56573 ------------------------------------------------------------------------------Address 53: Parking Brake Labels: 4F0-910-801.lbl Part No SW: 4F0 910 801 D HW: 4F0 907 801 B Component: EPB CEFC0090 H05 0090 Revision: --H05--Coding: 0000111 Shop #: WSC 02145 785 00200

------------------------------------------------------------------------------Address 56: Radio (R) Labels: None Part No SW: 4F0 035 053 B HW: 4F0 035 053 Component: Radio U Basic H45 0020 Revision: AB001007 Serial number: 341E%097574679 Coding: 010003020100000000 Shop #: WSC 02391 823 56573

Parking Brake (J540) Coding 000??xx: Engine 01 = 2.0l TDI (Diesel) 03 = 3.0l TDI (Diesel) 05 = 2.7l TDI (Diesel) 10 = 2.0l TFSI (Gasoline) 20 = 2.4l MPI (Gasoline) 30 = 2.8l FSI (Gasoline) 40 = 3.0l MPI (Gasoline) 50 = 3.2l FSI (Gasoline) 60 = 4.2l MPI (Gasoline) 70 = 4.2l FSI (Gasoline) 000xx?x: Transmission 1 = Manual Transmission 2 = Automatic Transmission (09L/09E) 3 = Multitronic (01J) 000xxx?: Country 1 = Rest of World (RoW) C18,2 = USA/Canada C19,3 = Japan

Page 8

------------------------------------------------------------------------------Address 5F: Information Electr. (J794) Labels: None Part No SW: 4E0 035 642 B HW: 4E0 035 642 Component: B-ER H52 0041 Revision: -------- Serial number: 347DG09B000030 Coding: 01000000000282CD01000305EF6300000200 Shop #: WSC 02391 823 56573 Byte 0 ; bit 0 : ??? Byte 0 ; bits 1-7 : “Error 31” Byte 1 ; bit 0 : ??? Byte 1 ; bit 1 : ??? Byte 1 ; bit 2 : ??? Byte 1 ; bits 3-7 : “Error 31” Byte 2 ; bit 0 : ??? Byte 2 ; bits 1-7 : “Error 31” Byte 3 ; bit 0 : ??? Byte 3 ; bit 1 : ??? Byte 3 ; bits 2-7 : “Error 31” Byte 4 ; Bits 0-1 : MMI Splashscreen = car > carcodingvehicule > configuration line Bits 2-7 : “Error 31” Byte 5 ; bit 0 : ??? Byte 5 ; bit 1 : ??? Byte 5 ; bit 2 : ??? Byte 5 ; bits 3-7 : “Error 31”

Byte 10 : Bit 0 = car > carextdevicelist > MFL (MultiFunktionsLenkrad) Commandes au volant Bit 1 = car > carextdevicelist > VIN Bit 2 = car > carextdevicelist > Battery Bit 3 = car > carextdevicelist > Oil level gauge Bit 4 = car > carextdevicelist > Sliding roof Byte 11 : Bit 0 = car > carfunctionlist > Parking help audio dim 1 Bit 1 = car > carfunctionlist > Parking help audio dim 2 ; Remarque : lorsque l’on sélectionne cette fonction dans le menu caché, le bit 1 ne change pas d’état dans le calculateur Bit 2 = car > carfunctionlist > AM/FM toggle Bit 3 = car > carfunctionlist > Oil level gauge extended Byte 12 : Bit 0 = car > carprotocollswitch > Air condition Bit 1 = car > carprotocollswitch > Auxiliary heating Bit 2 = car > carprotocollswitch > ACC Bit 3 = car > carprotocollswitch > Air suspension Bit 4 = car > carprotocollswitch > RDK Bit 5 = car > carprotocollswitch > Interior light Bit 6 = car > carprotocollswitch > Exterior light Bit 7 = car > carprotocollswitch > APS

Bytes Nr 4 and 6 to 13 are selectable via the hidden menu. Paths in the hidden menu are given below.

Byte 6 : Bit 0 = car > cardevicelist > Air condition Bit 1 = car > cardevicelist > Auxiliary heating Bit 2 = car > cardevicelist > HUD (Head Up Display) Bit 3 = car > cardevicelist > ACC (Adaptative Cruise Control) Bit 4 = car > cardevicelist > Air suspension Bit 5 = car > cardevicelist > RDK (Reifen Druck Kontrolle) Bit 6 = car > cardevicelist > Interior light Bit 7 = car > cardevicelist > Exterior light Byte 7 : Bit 0 = car > cardevicelist > APS (Audi Parking System) Bit 1 = car > cardevicelist > RVC (Rear View Camera) Bit 2 = car > cardevicelist > Wiper Bit 3 = car > cardevicelist > Central lock system Bit 4 = car > cardevicelist > Mirror Bit 5 = car > cardevicelist > Bord computer Bit 6 = car > cardevicelist > Clock Bit 7 = car > cardevicelist > Service intervall (Audi Service Interval reminder) Byte 8 : Bit 0 = car > cardevicelist > Central unit master Bit 1 = car > cardevicelist > Compass (miroir avec boussole) Bit 2 = car > cardevicelist > Charisma (Audi Drive Select) Choix mode suspension Bit 3 = car > cardevicelist > Lane departure warning (Lane Assist) Bit 4 = car > cardevicelist > Lane change assist Bit 5 = car > cardevicelist > Braking assist Bit 6 = car > cardevicelist > Front seat memory Bit 7 = car > cardevicelist > Rear seat memory Byte 9 : Bit 0 = car > cardevicelist > Hybrid Bit 3 = car > cardevicelist > Side view

Byte 14 ; bit 0 : ??? Byte 14 ; bit 1 : ??? Byte 14 ; bits 2-7 : “Error 31” Byte 15 ; bit 0 : ??? Byte 15 ; bit 1 : ??? Byte 15 ; bits 2-7 : “Error 31” Byte 16 ; bit 0 : ??? Byte 16 ; bit 1 : ??? Byte 16 ; bits 2-7 : “Error 31” Byte 17 ; bit 0 : ??? Byte 17 ; bits 1-7 : “Error 31”

Byte 13 : Bit 0 = car > carprotocollswitch > Wiper Bit 1 = car > carprotocollswitch > Central lock system Bit 2 = car > carprotocollswitch > Bord computer Bit 3 = car > carprotocollswitch > Clock Bit 4 = car > carprotocollswitch > Service intervall Bit 5 = car > carprotocollswitch > Braking assist Bit 6 = car > carprotocollswitch > Seat memory Bit 7 = “Error 31”

Page 9

------------------------------------------------------------------------------Address 62: Door, Rear Left (J388) Labels: 4F0-959-795.clb Part No SW: 4F0 959 795 M HW: 8K0 959 795 B Component: TSG HL H10 0251 Revision: Serial number: 0000101071721 Coding: 010804204040220001 Shop #: WSC 02391 823 56573 ------------------------------------------------------------------------------Address 72: Door, Rear Right (J389) Labels: 4F0-959-795.clb Part No SW: 4F0 959 795 M HW: 8K0 959 795 B Component: TSG HR H10 0251 Revision: Serial number: 0000101073703 Coding: 010804204040220001 Shop #: WSC 02391 823 56573 ------------------------------------------------------------------------------Address 76: Park Assist Labels: 4Fx-910-283.lbl Part No SW: 4L0 910 283 B HW: 4L0 919 283 B Component: Parkhilfe 4-Kan H02 0500 Revision: 00H02000 Serial number: 12330913305926 Coding: 0000006 Shop #: WSC 02323 785 00200

Parking Aid (J446) Coding 0?xxxxx: Options I +1 = Fingerprint Identification installed +2 = Optical Parking Aid installed 0x?xxxx: Options II +1 = Trailer Hitch installed +2 = Backup Camera installed 0xx?xxx: Transmission 0 = Manual Transmission 1 = Automatic Transmission 0xxx?xx: Specification 0 = ECE Countries (without reinforced bumper) 1 = ECE-Countries (S-Model without reinforced bumper) 2 = USA (with reinforced bumper) 3 = USA (S-Model with reinforced bumper) 0xxxx?x: Chassis 0 = Sedan 0xxxxx?: Model 3 = Japan 6 = ??? 8 = Audi A8 (4E)C18,2 = USA/Canada

Page 10

3) Mode opératoire activation fonctions :  MMI hidden menu VAG COM Module #5F-Information Electr. Adaptation-10 Channel 6 Set to 1 (default setting = 0)

 Audi Parking System : Visual screen VAG COM Module #76-Park Assist Coding-07 x?xxxxx Set to 2 (default setting = 0) car > carmenuoperation parking help Set to 5 (default setting = 1) NB : If set to 1, the parameters can only be set when the vehicule doesn’t move (0 km/h)

 Reverse mirror tilt down VAG COM Module #52-Door Elect , Pass. Coding-07 Byte 4 Set to 4C (default setting = 40)

 Speed warning + gear recommendation MMI (SETUP+CAR) car > cardevicelist Bord computer Set to  (default setting = ) NB : Corresponds to module #5F byte 7 bit 5 car > carmenuoperation instrument cluster Set to 5 (default setting = 0) NB : If set to 1, the speed warning can only be set when the vehicule doesn’t move (0 km/h) NB : car > carprotocolswitch > Bord computer must be disabled  (corresponds to module #5F byte 13 bit 2) otherwise Bord computer appears in MMI but in grey

Page 11

 Auxiliary heating/ventilation VAG COM Module #08-Auto HVAC Coding-07 +2048 (add 2048 to the default coding : “0000020” => “0002068”) NB : Only auxiliary ventilation can be enabled (auxiliary heating works with a specific heater). Then, this coding generates an error : “01207 - Control Module for Auxiliary Heater (J364) / 004 - No Signal/Communication”. To not have this error, setting channel 6 to “1” in Adaptation-10 (default setting = 0) should be the solution, but it doesn’t work on mine !

 Highway light (speed > 150 km/h during more than 15 seconds) NB : Lights turn off only after vehicule has been stopped VAG COM Module #09-Cent. Elect. Coding-07 Select REGENLICHTSENSORH04 module Convert default coding 00146221 to hexadecimal => 023B2D NB 1 : “02” = byte 2 ; “3B” = byte 1 ; “2D” = byte 0 (it is the opposite than in VAG COM Long Coding, where the byte 0 starts on the left) NB 2 : “02” in byte 2 = “rain light” (light is on when it rains) Add +1 in byte 2 => 033B2D Convert “033B2D” to decimal => 00211757 ; apply this coding

 Battery capacity status bar MMI (SETUP+CAR) car > carextdevicelist Battery Set to  (default setting = ) NB : Corresponds to module #5F byte 10 bit 2 car > carmenuoperation battery Set to 5 (default setting = 0)

 Needle sweep VAG COM Module #17-Instruments Coding-07 Byte 1 Bit 0 “Gauge test / needle sweep” Set to  (default setting = )

Page 12

 “Audi RS6” MMI splashscreen MMI (SETUP+CAR) car > carcodingvehicule configuration line Set to “[RS model] 5/5” (default setting = [standard] 2/5) NB : Corresponds to module #5F byte 4 bit 0  + bit 1  Update Splashscreen (according car line)

 “Long Life” service interval VAG COM Module #17-Instruments Adaptation-10 Channel 45 Set to 2 (default setting = 1) NB : Default settings in hidden menu were not changed : - Cardevicelist  (corresponds to module #5F byte 7 bit 7 ) - Carprotocollswitch  (corresponds to module #5F byte 13 bit 4 ) - Carmenuoperation = 7

Pour enregistrer les modifications dans le menu caché :

Page 13

4) Contenu « Adaptation-10 » des calculateurs -------------------------------------------------------------------------------08-Auto HVAC -------------------------------------------------------------------------------Adaptation Channel 003: Compressor shut-off by engine control unit via "AC compressor shut-off" function. Stored value 1 J At basic setting "1" the activation of the AC compressor regulating valve -N280 is disabled as N/A soon as the request is received from the engine control unit. By way of the adaption function the disable of the -N280 due to "AC compressor cut-off" can be N/A suppressed by changing the adaption to"0" (the Climatronic control unit -J255 then ignores the N/A request from the engine control unit). The adaption "0" can be effective, for example, depending on the design of the vehicle and the N/A Climatronic control unit -J255when "hot climate" is coded ex factory.

-------------------------------------------------------------------------------Adaptation Channel 004: Upper limit of control current for AC compressor regulating valve -N280. Stored value 0 J At basic setting "0" the control current for the AC compressor regulating A/C Regulating Valve (N280) Current Limit valve N280 is limited according to the coding of the Climatronic control unit -J255. N/A The adaption must (can) not be changed. If, for example, „2,0" is entered, the Climatronic control unit limits the N/A control current to 200 mA. N/A N/A -------------------------------------------------------------------------------Expanded AC readiness. Adaptation Channel 005: This adaption cannot be changed by Service in Climatronic control units -J255 fitted at start of production (introduction pending). Stored value 0 J At basic setting "0" the activation of the AC compressor regulating valve N280 is disabled as soon N/A as the ambient temperature is lower than about +2°C (below -8 °C if a request for "automatic recirculated air" mode is received from the air quality sensor -G238). N/A So the evaporator does not ice up at low ambient temperatures, the shut-off temperature is raised in N/A line with the evaporator out-flow temperature, the passenger compartment temperature and the operating status of the air conditioner. N/A By changing the adaption to "1" (introduction pending) the shut-off temperature can be lowered to about -5 °C (about -8 °C if a request for "automatic recirculated air" mode is received from the air quality sensor -G238).

-------------------------------------------------------------------------------Adaptation Channel 006: Decision-making aid, auxiliary heating/ventilation. J At basic setting "0" (Automatic) the Climatronic control unit -J255 decides, with Stored value 0 the ignition off, by way of the measured actual and the preset specifications, Auxiliary Heating/Venting Aid whether the auxiliary heater is started up or the system is to operate in auxiliary ventilation mode. N/A J At setting "1" (last function) the Climatronic control unit -J255 always requests N/A the mode last set and activated on the MMI terminal (auxiliary heater or auxiliary ventilation) regardless of the measured and preset temperatures. N/A N/A -------------------------------------------------------------------------------Adaptation Channel 007: Shut-off response, auxiliary heating/ventilation. Stored value 0 J At basic setting "0" the auxiliary heating/ventilation mode is maintained until the preset operating time has elapsed or is Auxiliary Heating/Venting Shut-Off switched off manually. N/A J At setting "1" the auxiliary heating/ventilation is switched off when the engine is switched off. N/A N/A N/A

Page 14

-------------------------------------------------------------------------------Adaptation Channel 009: Stored value 0 Adaptation Channel Reset (based on Coding) Reset all adaption values to the setting as per the coding. It may not be possible to change this adaption in Climatronic control N/A units -J255 fitted at start of production (introduction pending). J At basic setting"0" no reset is performed. N/A J At setting "1"all changed adaption values are reset to the basic N/A setting according to the coding. When the adaption has been carried out in this adaption channel, the N/A readout changes to "0".

-------------------------------------------------------------------------------Adaptation Channel 010: Upper limit of air temperature regulation downstream of evaporator. Stored value 10 J At setting "10", depending on the setting on the Climatronic control unit J255, the measured temperatures etc., the evaporator temperature can be regulated to a maximum of +10°C (Celsius). N/A J At setting "0 ... 9" the temperature of the air is regulated according to the adaption e.g. to N/A maximum 6°C at setting „6". So the evaporator does not ice up, no value less than"2" may be entered (values below"2" are N/A intended for extreme operating conditions and not permitted in countries with temperate climates). N/A -------------------------------------------------------------------------------Adaptation Channel 011: Display of "sun roof with solar cells" function on MMI. Stored value 1 J At basic setting "1" the "solar operation" function is not displayed on the MMI display. Solar Sunroof Adaption on vehicles with and without sun roof with factory-fitted solar cells. J On vehicles with a sun roof with solar cells the setting "0" can be made on request from the N/A customer. This enables the customer to disable "solar operation". N/A By way of the "Adaption" function (adaption channel "43") the temperature at which the solar function is enabled and disabled can be set. N/A N/A -------------------------------------------------------------------------------Adaptation Channel 014: This adaption cannot be changed by Service. Stored value 0 J If it is possible to change the adaption of a Climatronic control unit -J255 fitted at start of production, you must under no circumstances Not Relevant for Customer Service J At basic setting "0" readout is disabled. Intended e.g. in development to display the "Component N/A protection" fault memory entry of the Climatronic control unit -J255. N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 015: Stored value 60 Fresh Air Blower (V2) Speed at Aux. Heat./Vent. N/A Fresh air blower speed in auxiliary heating/ventilation mode. J At basic setting "60" the Climatronic control unit -J255 regulates the maximum voltage at the fresh air blower -V2 to N/A 6 V. N/A At setting "30 ... 80" the fresh air blower speed is regulated to the preset value. (e.g. "45" corresponding to 4.5 V). So as not to place excessive strain on the battery in auxiliary heating/ventilation mode (and so cause it to discharge N/A too quickly), no value greater than "60" should be entered.

Page 15

-------------------------------------------------------------------------------Adaptation Channel 016: Stored value 0 Enable activation of auxiliary heater via "residual heat" function. This function is only effective in vehicles with an ex factory "auxiliary heater" Vehicles with a Climatronic control unit N/A J255. "Basic" version are not currently configured for the "residual heat" function. N/A Vehicles with a Climatronic control unit -J255 "Comfort" version. J At basic setting "0" auxiliary heater is not switched on if the Climatronic control unit -J255 is in"residual heat" mode N/A (with the ignition off the "Econ" button was held down for more than about 3 sec. and the engine coolant temperature is inadequate to attain the specified passenger compartment temperature. N/A

J At setting "1" auxiliary heating is switched on if the Climatronic control unit -J255 is in "residual heat" mode (with the ignition off the "Econ" button was held down for more than about 3 sec.) and the engine coolant temperature is inadequate to attain the specified passenger compartment temperature.

-------------------------------------------------------------------------------Adaptation Channel 017: Stored value 0 Enable a retrofitted auxiliary heater. N/A In vehicles with an ex factory auxiliary heater the adaption must not be changed to "1" (the auxiliary heater and the N/A Climatronic control unit -J255 exchange their information over the convenience system data bus) J At basic setting "0" no adaption of the Climatronic control unit -J255 is possible due to a retrofitted auxiliary heater by way of N/A a positive signal. At connector "D" chamber "11" terminal "15" is connected If a voltage is applied to connector "D" chamber N/A "11" with the ignition off, the Climatronic control unit will not start up. J At setting "1" activation of the Climatronic control unit -J255 due to a retrofitted auxiliary heater by way of a positive signal is possible. At connector "D" chamber "11" the signal output of the auxiliary heater is connected. If a voltage is applied to connector "D" chamber "11" with the ignition off, the Climatronic control unit starts up (auxiliary heating mode).

-------------------------------------------------------------------------------Adaptation Channel 019: Stored value 0 Shut-off of "additional heater" function in vehicles with diesel engine and factory fitted auxiliary heater by pressing "Econ" button on Climatronic control unit -J255. N/A This function is only effective in vehicles with an ex factory "auxiliary heater" In vehicles without the "auxiliary heater" optional extra an additional electric heater is fitted. This adaption has no N/A effect for the additional electric heater. N/A J At basic setting "0" pressing the "Econ" button does not disable activation of the auxiliary heater as "additional heating". N/A

J At setting "1" pressing the "Econ" button does not disable activation of the auxiliary heater as "additional heating".

-------------------------------------------------------------------------------Adaptation Channel 020: Stored value 1 Limitation of time for automatic recirculated air mode and low ambient temperature. If the request from the air quality sensor -G238 is present for an extended time because of unfavourable ambient N/A conditions. This adaption channel is not used on Climatronic control units -J255 fitted at start of production (phase-in). N/A J At basic setting "1" the time for automatic recirculated air mode at an ambient temperature between -1 °C and +10 N/A °C is limited to 30 sec. J At setting "0" the time for automatic recirculated air mode at an ambient temperature between -1 °C and +10 °C is N/A

not limited. J At setting "2" the time for automatic recirculated air mode at an ambient temperature between -1 °C and +15 °C is limited to 15 sec. At low ambient temperatures and high humidity levels (such as in fog or rain), the windows may mist up if the vehicle is driven for an extended period with recirculated air mode active.

-------------------------------------------------------------------------------Adaptation Channel 021: Stored value 0 Engine Heating via Auxiliary Heating N/A Display of function "incl. engine" on MMI display. Depending on the MMI version, the "incl. engine" function is not displayed even though it was enabled in the Climatronic N/A control unit -J255 in adaption channel "21" (introduction pending). N/A This function is only effective in vehicles with an ex factory "auxiliary heater" and if programmed on the MMI. N/A

J At basic setting "0" the function "incl. engine" on the MMI display is not displayed, even though it has been enabled in the Climatronic control unit -J255 in adaption channel "21" (introduction pending). This function is only effective in vehicles with an ex factory "auxiliary heater", if so configured on the MMI. J At basic setting "0" the function "incl. engine" is not displayed on the MMI display. - In auxiliary heating mode the coolant shut-off valve -N279 is activated via a characteristic stored in the auxiliary heater control unit in such a way that the passenger compartment is warmed up as rapidly as possible. J At setting "1"the function "incl. engine" or "engine preheating" is displayed on the MMI display. The setting "1" can be made at the customer's request. By way of the setting "incl. engine" on the MMI the customer can decide, in auxiliary heating mode, to warm up the engine along with the passenger compartment. The coolant shut-off valve N279 is not activated, so warming of the passenger compartment takes correspondingly longer.

Page 16

-------------------------------------------------------------------------------Adaptation Channel 022: Adaption of fresh air blower characteristic. J At basic setting "0" the fresh air blower -V2 runs at the speed assigned to that Stored value 0 coding. Fresh Air Blower (V2) Characteristic J At setting "1" the fresh air blower -V2- runs at a somewhat lower speed across the full characteristic line. N/A J At setting "2" the fresh air blower -V2- runs at a somewhat higher speed across the N/A full characteristic line. J At setting"3" the fresh air blower -V2- runs at the speed agreed for the USA across N/A the full characteristic line (in some areas at somewhat higher speed. The settings "4" and "5" are currently not permitted (no characteristic stored). N/A -------------------------------------------------------------------------------Adaptation Channel 023: Stored value 0 Adaption of temperature characteristic. J At basic setting "0" the Climatronic control unit -J255 regulates the temperature to the values Temperature Characteristic assigned to this coding. N/A J At setting "1" the temperature in Winter is regulated to a somewhat cooler temperature characteristic. (characteristic for cold climates). N/A J At setting "2" the temperature in Summer is regulated to a somewhat cooler temperature N/A characteristic. (corresponding to the characteristic stored for the USA coding). The settings "3", "4" and "5" are currently not permitted (no characteristic stored). N/A -------------------------------------------------------------------------------Adaptation Channel 027: Stored value 2 Run-on time for activation of the valves in the pump valve unit after ignition off. Activation of the valves (heat N/A regulation valve, left -N175 and heat regulation valve, right -N176) for a specific time after ignition off prevents hot coolant flowing into the air conditioner heat exchanger. N/A J At basic setting "2" the valves are maintained in operation for 20 sec. after ignition off by the Climatronic control N/A unit -J255. J At setting "0 ... 180" the valves are maintained in operation for the preset time after ignition off (e.g. 80 sec. at N/A setting "8"). -------------------------------------------------------------------------------Adaptation Channel 028: Stored value 5 Time until shut-off of the coolant circulation pump if the speed falls below the value shown in measured value block"53" N/A (e.g. if the pump is not moving freely). N/A J At basic setting "5" the pump is maintained in operation for 5 sec. by the Climatronic control unit -J255 (before being shut off and a fault being stored). N/A J At setting "0 ... 255" the pump is maintained in operation for the preset time (e.g. 10 sec. at setting "10"). N/A -------------------------------------------------------------------------------Adaptation Channel 033: Stored value 60 Intended for activation of the air ionisation module -J707 by the Climatronic control unit -J255 in "recirculated air" mode. N/A J At basic setting "60", in fresh air mode the air ionisation module -J707 is activated at approx. 60 N/A % of maximum output. J At setting "0 ... 100", in fresh air mode the air ionisation module -J707 is activated at the entered N/A speed (e.g. at 40% at setting "40"). N/A -------------------------------------------------------------------------------Adaptation Channel 034: Stored value 0 Intended for "Comfort" spec Climatronic control unit -J255 to change the specified air humidity value (introduction pending). N/A J On "Comfort" Climatronic control units -J255 fitted at start of production this adaption is not operative N/A (introduction pending; but the value must still not be changed). J On "Basic" version Climatronic control units -J255 not operative. But the value must still not be N/A changed. N/A

Page 17

-------------------------------------------------------------------------------Adaptation Channel 038: Activation of "recirculated air" function with windscreen wiper in "wipe/wash" mode. Stored value 0 The adaption channel is only used with Climatronic control units -J255 as from software number "0070". N/A The adaption channel is not used with Climatronic control units -J255 up to software number "0060" . The air conditioner is switched to recirculated air mode when the windscreen wiper is in "wipe/wash" mode. N/A J At basic setting "0" the air conditioner is not switched to recirculated air mode when the wipe/wash switch is N/A pressed. At setting "1" (may be made at the customer's request) the Climatronic control unit -J255 switches the air N/A conditioner to recirculated air mode as soon as a request for windscreen wiper wipe/wash mode is received over the data bus system.

-------------------------------------------------------------------------------Adaptation Channel 039: Stored value 5 N/A Duration of readout of specific air conditioner setup functions on the MMI display, e.g. temperature setting, air distribution (in air conditioner "comfort" version). N/A J At basic setting "10" or "5" (depending on the Climatronic control unit -J255 and on the production period) the relevant air conditioner function is displayed for 10 sec. or 5 sec. on the MMI. N/A J At setting "2 ... 200" the relevant air conditioner function is displayed for the preset time (e.g. 20 sec. at setting "20") on the N/A MMI. On Climatronic control units fitted at start of production the value "30" can also be adapted. Change it as appropriate to "10". If the relevant function button on the Climatronic control unit -J255- is pressed a second time, the MMI display immediately switches back to its main menu.

-------------------------------------------------------------------------------Adaptation Channel 040: Stored value 30 Duration of readout of specific setup functions (e.g. via the "Setup" function on the air conditioner "comfort" version up to model year 2008) on the MMI display (e.g. Econ). N/A J At basic setting "10" or "30" (depending on the version of the Climatronic control unit -J255 and on the production period) the relevant air conditioner function is displayed for 10 sec. or 30 sec. on the MMI. N/A J At setting "2 ... 200" the relevant air conditioner function is displayed for the preset time (e.g. 20 sec. at setting N/A "20") on the MMI. On Climatronic control units fitted at start of production the value "30" can also be adapted. Change it as N/A appropriate to "10". If, for example, the "Setup" button is pressed a second time, the MMI display immediately switches back to its start menu.

-------------------------------------------------------------------------------Adaptation Channel 041: Stored value 0 Adaption of air flow to windscreen in Summer at "Auto" setting of Climatronic control unit -J255. In "Auto" mode cooled air is routed to the windscreen in Summer. Under certain circumstances this may cause N/A condensation to form on the outside of the windscreen. If the coding for "USA" or "Japan" is entered, the adaption"1" is in force. N/A J At basic setting "0" the air flow is routed to the windscreen based on the setting for the prevailing ambient N/A conditions in the Climatronic control unit -J255. J At setting "1" activation of the Climatronic control unit N/A

Climatronic control unit -J255, a lower air flow is routed to the windscreen (the defrost flap and the flap for indirect ventilation are almost fully closed).

-------------------------------------------------------------------------------Adaptation Channel 042: Stored value 0 Adaption of air flow into footwell in cooling mode (Summer operation). J At basic setting "0" the footwell flaps are closed in cooling mode. N/A At setting "1" the footwell flaps are open slightly in cooling mode (about 20%, a small flow of N/A air is routed into the footwell). N/A N/A

Page 18

-------------------------------------------------------------------------------Adaptation Channel 043: Stored value 48 Shut-off temperature for "solar operation" function. At low ambient temperatures,condensation may form on the windscreen in solar operation (the fresh air drawn in N/A by the fresh air blower is heated up in the air conditioner unitand absorbs moisture as it passes through the N/A evaporator which then condenses again on the cold windscreen). J At basic setting "48" the "solar operation" function is shut off at an ambient temperature below 8°C(Celsius). N/A J At setting "0 ... 120" the "solar operation" function is shut off according to the preset ambient temperature (e.g. 0°C at setting "40"). N/A

The adaption value is calculated as follows: Specified shut-off temperature in °C + 40 = adaption value (e.g. 8°C+ 40 is 48).

-------------------------------------------------------------------------------Adaptation Channel 044: Stored value 36 Time within which the temperatures specified for the basic setting, display group"003", must be reached. N/A J At basic setting "36" or "60" (depending on the version of the Climatronic control unit -J255 and on the production period) the specified temperatures must be reached within a maximum of 180 sec. (or 300 sec with adaption "60") N/A (36 x 5 = 180 sec.). The preset time should not be changed (if the presettings are not attained under normal N/A ambient conditions there may be a fault). In unfavourable ambient conditions (such as very high ambient temperature and high air humidity) it may be N/A necessary to increase the engine speed during the basic setting to around 2000 rpm (or extend the time to maximum 300 sec.) for the specified values to be attained. At setting "0" no basic setting is possible in display group "003". At setting"1 ... 254" the default time is between 5 sec. (at setting "1") and 21 min (at setting "254"). At setting "255" the basic setting runs without time limit until the ignition is switched off (input not permissible).

-------------------------------------------------------------------------------Adaptation Channel 045: Stored value 12 Time within which the temperatures specified for the basic setting, display group"004", must be reached. J At basic setting "12" the preset temperatures must be reached within a maximum of60 sec. (12 x 5 = N/A 60 sec.). The preset time must not be changed (if the presettings are not attained there is a fault). N/A At setting"0" no basic setting is possible in display group "004". N/A At setting"1 ... 254" the default time is between 5 sec. (At setting "1") and 21 min. (at setting "254"). - At setting "255" the basic setting runs without time limit until the ignition is switched off (input not N/A permissible).

-------------------------------------------------------------------------------Adaptation Channel 046: Stored value 10 Temperature difference between the left and right sides which must be attained in the basic setting, display group"004". N/A J At basic setting "10" the temperature difference must be at least 10°C (Celsius). N/A The preset time must not be changed (if the presettings are not attained there is a fault). At setting "0 ... 100" the presetting is between 0°C (at setting "0") and 100°C (at setting "100"). N/A If an excessively high value is entered (e.g. above "20") it may be that the basic setting cannot be successfully N/A completed, so do not change the basic setting value. -------------------------------------------------------------------------------Adaptation Channel 047: Display of temperature setting on Multi Media Interface (MMI). Stored value 5 Vehicles with a "comfort" spec air conditioner as from model year 2007 (phased-in). N/A Depending on the coding and the adaption of the Climatronic control unit -J255, when the temperature knob is turned the setting is not always be displayed on the MMI. N/A J At setting "5" (currently on all vehicles except for USA) the temperature setting is displayed on the MMI when the N/A temperature knob on the Climatronic control unit -J255 is turned. J At setting "0"" (currently only intended for USA) the temperature setting is only displayed on the MMI when the N/A temperature knob on the Climatronic control unit -J255 is first pressed briefly.

Page 19

-------------------------------------------------------------------------------09-Cent. Elect. -------------------------------------------------------------------------------Adaptation Channel 001: Stored value 140 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 002: Stored value 18 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 003: Stored value 24 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 004: Stored value 8 OFF N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 005: Stored value 15 OFF N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 006: Stored value 38 OFF N/A N/A N/A --------------------------------------------------------------------------------

Page 20

Adaptation Channel 007: Stored value 66 OFF N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 008: Stored value 100 OFF N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 009: Fonction Coming Home / Leaving home : Stored value 20 Ajustement de la temporisation. 20.7 s Time Plage de réglage : de OFF à 60 s par increments de 10 s NB : Lorsque l’on met des valeurs qui ne sont pas des multiples de 10, le système considère N/A la dizaine par défaut. Exemple : Si l’on met « 29 », le système comprend « 20 » N/A N/A -------------------------------------------------------------------------------Adaptation Channel 010: Stored value 5 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 011: Stored value 20 20.0 % Duty Cycle N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 012: Stored value 60 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 013: Stored value 50 N/A N/A

Page 21

N/A N/A -------------------------------------------------------------------------------Adaptation Channel 014: Stored value 0 Adaption of daylight driving lights Daytime Running Lights The daylight driving lights adaption function is necessary when the -With daylight driving lights selectable via MMI- option was selected when recoding the control unit. N/A Because then the default state of the daylight driving lights in the various country variants in the Audi A6 has to be changed from On to Off. N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 015: Stored value 1 Enabled N/A N/A N/A

Fonction Leaving Home : 0 = OFF 1 = ON

-------------------------------------------------------------------------------Adaptation Channel 016: Stored value 0 Adaption of rear wiper The rear wiper adaption function is necessary if the rear wiper is to Rear Wiper Comfort Function automatically wipe the rear window as soon as you engage reverse gear while N/A the windscreen wipers are in operation. N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 017: Stored value 3 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 018: Stored value 50 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 019: Stored value 7 N/A N/A N/A N/A

Page 22

-------------------------------------------------------------------------------Adaptation Channel 020: Stored value 6 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 021: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 022: Stored value 40 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 023: Stored value 5 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 024: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 025: Stored value 30 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 060: Stored value 65535

Page 23

Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 061: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 062: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 063: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 064: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 065: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 066: Stored value 65535 Adapt Value Learned N/A N/A

Page 24

-------------------------------------------------------------------------------Adaptation Channel 067: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 068: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 069: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 070: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 071: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 072: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 073: Stored value 65535

Page 25

Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 074: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 075: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 077: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 078: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 079: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 080: Stored value 65535 Adapt Value Learned N/A N/A

Page 26

-------------------------------------------------------------------------------Adaptation Channel 081: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 082: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 083: Stored value 65535 Adapt Value Learned N/A N/A -------------------------------------------------------------------------------Adaptation Channel 084: Stored value 65535 Adapt Value Learned N/A N/A

Page 27

-------------------------------------------------------------------------------17-Instruments -------------------------------------------------------------------------------In the event of a service case occurring (centre display shows "SERVICE!") Adaptation Channel 002: the adaption channel 2 contains the number "1" indicating a due service Stored value 1 (mileage limit reached). The service interval is reset by the following inputs: Service Reminder I Set adaption channel 2 A to 0 The reset automatically resets the relevant channels to 40 (mileage), 41 (days) ServRemInd and 46 (total consumption) for petrol engined cars and 47 and 48 (thermal Reset loading) for diesel engined cars. General rule: N/A The oil grade (adaption channel 45) is to be set before the interval limits, N/A followed by the remaining ESI adaption channels (42-49). -------------------------------------------------------------------------------Adaptation Channel 003: This regulates evaluation of the consumption signal in % , which is preset by Stored value 100 coding (default: 100% consumption = adaption value 100), and thereby corrects the readout on the on-board computer. Valid values are 85% - 115%. Consumption Correction The consumption signal transmitted by the engine is modified by the preset Consumption value. In this way, deviations from the actual consumption can be corrected. The correction influences the momentary consumption, average consumption, Indicator range and tank indication in the reserve zone. N/A Example: Adaption 110 = increase in consumption by 10%. N/A -------------------------------------------------------------------------------Adaptation Channel 009: I km/mileage reading/10 e.g.: 5000km on dash, 500 in adaption channel (in case of mileage coding in miles) Stored value 1328 Note: Adaption of this channel by vehicle self-diagnosis must be carried out by way of the access Mileage/Odometer authorisation function "13861". Import of the kilometre reading from the old dash panel insert into the new one is linked to the Kilometer following conditions: The odometer in the new dash panel insert must show less than 100 km. in 10 It is only possible to enter a kilometre reading greater than 100 km. km If the dash panel insert is coded for miles (Great Britain and USA), the input must be in miles. After an incorrect input further attempts are possible, until a distance of 5 km has been exceeded N/A one time following the first change. An incorrect input after 5 km may mean the unit is no longer usable. YZ The vehicle's kilometre/mileage reading can be determined retrospectively from the maintenance tables, service booklets or repair history.

-------------------------------------------------------------------------------Adaptation Channel 019: Stored value 0 I Radio clock synchronisation time Vehicles with PR number are fitted with an external radio clock module in the rear bumper. With Remote Clock adaption channel 19 the synchronisation time can be set, with the value "0" corresponding to "no N/A radio clock fitted". In vehicles with radio clock, the value should be set to "20" for a 20-minute synchronisation. With the first battery voltage the connections to the receiver module are checked N/A in test mode. The check status is displayed in measured value block 2 at the 2nd position. The synchronisation time can be adapted from 0 to 50 minutes. N/A N/A -------------------------------------------------------------------------------Adaptation Channel 021: Stored value 16 Time (Hour) Hour N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 022:

Page 28

Stored value 25 Time (Minute) Minute N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 023: Stored value 10 Date (Year) Year N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 024: Stored value 2 Date (Month) Month N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 025: Stored value 27 Date (Day) Day N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 030: Stored value 125 Tank Characteristic (Fuel Level Sensor 1) N/A N/A N/A

I Tank characteristic (fuel gauge sender 1 - G, for front-wheel drive and Quattro vehicles) Parallel shift of tank characteristic by +/-32 Ohms by arrow keys on VAG tester Correction: -32 ... -2 -1 0 +1 +2 ... +32 Value in channel: 96 ... 126 127 128 129 130 ... 160

-------------------------------------------------------------------------------Adaptation Channel 031: Stored value 0 N/A N/A N/A

I Wet calibration This is used to inform the dash panel insert unit of the tank content on initial fill-up. With the first terminal term. 15 On the dash panel insert unit corrects the current measured fuel gauge sender resistance to the litres figure in this channel.

--------------------------------------------------------------------------------

Page 29

Adaptation Channel 032: Stored value 0 N/A N/A N/A

I Non-recordable tank volume The volume not recordable by the fuel gauge sender is notified to the dash panel insert via this channel. Before the initial fill-up is entered in channel 31, the dead volume must be entered.

-------------------------------------------------------------------------------I Full calibration Adaptation Channel 033: This channel is specially for service cases in which the tank gauge needle on Stored value 128 the dash panel does not reach the full indicator when the tank is full. Correction of the tank gauge indication is started by the input value "65535". In Tank Characteristic (Full Calibration) N/A N/A N/A

this process, the characteristic is not shifted in parallel as in channel 30, but above a readout 1/2 the characteristic line is elongated upwards or shortened. So in the lower range, specifically as from the reserve mark, the readout remains unchanged. The output value is 0 (value in tester is 128). The elongation can be varied by ± 16 Ohms (value from 112-144).

-------------------------------------------------------------------------------Adaptation Channel 034: Stored value 0 N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 035: This regulates evaluation of the consumption signal in % , which is preset by Stored value 0 Various warnings, such as the oil pressure warning (at 1500 rpm) are linked to Speed Threshold engine speed thresholds. In order to configure such settings in a variable way, the engine speed threshold can be altered in 250 rpm increments. The basic N/A setting is 1500 rpm and can be adapted with an offset of max. 1000 rpm. N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 036: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 038: With this function the Oil Min warning can be activated and deactivated when Stored value 1 the oil level is low. At present this warning is permanently present for all vehicles, however. This function can only be executed following prior input of Oil Minimum Detection the LOGIN with "13861". The activation/deactivation is effected in adaption Oil channel 38. Reading evaluation N/A

Page 30

-------------------------------------------------------------------------------Adaptation Channel 039: I TOG fitted YES/NO (TOG = oil level/temperature sender G266) Stored value 1 This channel determines whether the TOG sensor is fitted in the dash panel insert or in a different control unit (e.g. the engine control unit). Depending on Oil Level Sensor Adaptation that setting, the diagnosis of the sensor is then deactivated. At present the Oil sensor is fitted in all vehicles. The channel can only be altered after entering an access authorisation function with "13861". Reading evaluation N/A -------------------------------------------------------------------------------Adaptation Channel 040: I Distance driven since inspection in 100 km increments Stored value 130 This adaption channel (channel 40) counts the kilometres (miles) following a service, or starting from 0 km. The display is in units of 100 km. Mileage since Service The possible input range is between 0 and 2000; that is: 0 - 200000 km, Actual Value or 0 and 1250: 0 - 125000 miles. Oil in 1 00 km N/A -------------------------------------------------------------------------------Adaptation Channel 041: I Time elapsed since inspection in days Stored value 261 In adaption channel 41 the time as from the last service inspection is displayed. This channel counts the days passed following a service or from the Time since Service first time the battery is connected at the factory. The display is in units of one Actual Value day. By way of this channel the time limit for the extended service intervals (ESI) is calculated. Oil in 1 Days N/A -------------------------------------------------------------------------------I Minimum kilometres in 1,000km increments Adaptation Channel 042: In adaption channel 42 the min value of the kilometres driven is adapted. Stored value 150 This channel corresponds to the minimum possible distance in an exchange interval (unit: 100 km). For units with mileage coding the value is shown in Minimum Mileage to Service miles. Min. Value Adaption channel 42 can be adapted for the Audi A6 2005 > from 8000km/5000 miles up to 15000km/9000 miles. Oil in 1 K Group 1countries are adapted at 15000km/9000 miles. K Group 2 countries are adapted at 8000km/5000 miles. 00 km YZ USA vehicles are adapted with 10000 miles. N/A Canada vehicles are adapted with 15000 km -------------------------------------------------------------------------------Adaptation Channel 043: I Maximum kilometres in 1,000km increments Stored value 300 In adaption channel 43 the max value of the kilometres driven is adapted. This channel corresponds to the maximum distance which can be driven in a Maximum Mileage to Service service cycle (unit: 100 km). Adaption channel 43 can be adapted for the Audi A6 2005 > from Max. Value 8000km/5000 miles up to 30000km/19000 miles. Oil in 1 K Group 1 countries are adapted at 30000km/19000 miles. K Group 2 countries are adapted at 8000km/5000 miles. 00 km YZ USA vehicles are adapted with 10000 miles. N/A Canada vehicles are adapted with 15000 km

Page 31

-------------------------------------------------------------------------------Adaptation Channel 044: I Maximum time interval in days Stored value 730 In adaption channel 44 the max value for the days is adapted. This channel corresponds to the maximum drive time which can be driven in a service cycle Maximum Time to Service The display is in units of one day. Adaption channel 44 can be adapted for the Audi A6 2005 > from 365 up to Max. Value 730 days Oil in 1 K Group 1 countries are adapted at 730 days. K Group 2 countries are adapted at 365 days. Days YZ USA vehicles and Canada vehicles are adapted with 365 days. N/A -------------------------------------------------------------------------------Adaptation Channel 045: Stored value 1 I Oil grade 1 for vehicles without Longlife function Oil Quality 2 for vehicles with Longlife function Oil General rule: Quality The oil grade (adaption channel 45) is to be set before the interval limits, followed by the remaining adaption channels. The following sequence must be maintained: 45A43A42A44A49 or 45A42A43A49A44 for the FSID N/A (Flexible Service Interval Display). N/A K To change the oil grade select program J285 - Adaption of oil grade, (Rep.Gr.90). Group 1 countries: Germany, Belgium, Denmark, Finland, France, Greece, Great Britain, Ireland, Iceland, Italy, Canary Islands, Luxembourg, Netherlands, Norway, Malta, Austria, Portugal, Sweden, Switzerland/Liechtenstein, Spain/Andorra, Czech Republic, Cyprus. Group 2 countries: Canada and USA, Poland, Turkey, New Zealand, Australia, China, CIS (excluding Baltic states, Ukraine, Belarus), special request South America (excluding Argentina, Brazil, Chile), Romania, Chile, special request Near East (Jordan, Syria, Lebanon), special request Middle East (Iraq, Afghanistan), special request Africa (excluding North/South Africa), South Africa, special request North Africa (Egypt, Algeria, Libya, Morocco, Tunisia), special requests Brunei, Albania, Macedonia, Argentina, Estonia, Lithuania, Belarus, Bahrain, Kuwait, Qatar, Dubai.

-------------------------------------------------------------------------------Adaptation Channel 047: Stored value 103 Adaption channel 47:(diesel and petrol) I Sooting in 100 km increments (charge en suie de l’huile moteur) Soot Entry Arithmetic value used to calculate the amount of soot in the engine oil referenced to a distance of 100 km and used as comparison value for the service interval display. Soot Qty. in 1 NOTE: When changing the adaptation channels 042-048 manually the adaptation channels 040-048 must be stored in the following order: N/A 45 > 42 > 43 > 44 > 40 > 41 > 46 > 47 > 48 N/A -------------------------------------------------------------------------------Adaptation Channel 048: Stored value 93 Adaption channel 48:(diesel and petrol) I Thermal loading in 100 km increments (sollicitation thermique de l’huile) Thermal Load Arithmetic value used to calculate the thermal stress of the engine oil referenced to a distance of 100 km and used as comparison value for the service interval display. Thermal Load in 1 NOTE: When changing the adaptation channels 042-048 manually the adaptation channels 040-048 must be stored in the following order: N/A 45 > 42 > 43 > 44 > 40 > 41 > 46 > 47 > 48 N/A

Page 32

-------------------------------------------------------------------------------Adaptation Channel 049: In adaption channel 49 the min value for the days is adapted. This value is dependent on the engine variant (petrol or diesel). This channel corresponds to the minimum drive time Stored value 730 which can be driven in a service cycle The display is in units of one day. Minimum Time to Service Adaption channel 49 can be adapted for the Audi A6 2005 > from 365 up to 730 days K Group 1 countries are adapted at Min. Value I 365 days for petrol engines and I 730 days for diesel engines. Oil in 1 K Group 2 countries are adapted at Days I 365 days for petrol and diesel engines. YZ USA vehicles and Canada vehicles are adapted with 365 days. N/A -------------------------------------------------------------------------------Adaptation Channel 050: Stored value 150 Basic Distance Value for Oil Change with fixed Service Interval Basic Value Oil in 1 00 km N/A -------------------------------------------------------------------------------Adaptation Channel 051: Stored value 365 Basic Time Value for Oil Change with fixed Service Interval Basic Value Oil in 1 Days N/A -------------------------------------------------------------------------------Adaptation Channel 052: Stored value 300 Basic Distance Value for Inspection Basic Value Insp. in 1 00 km N/A -------------------------------------------------------------------------------Adaptation Channel 053: Stored value 130 Distance since Inspection Actual Value Insp. in 1 00 km N/A -------------------------------------------------------------------------------Adaptation Channel 054: Stored value 1095 Basic Time Value for Inspection Basic Value Insp. in 1 Days

Page 33

N/A -------------------------------------------------------------------------------Adaptation Channel 055: Stored value 261 Time since Inspection Actual Value Insp. in 1 Days N/A -------------------------------------------------------------------------------Adaptation Channel 056: Stored value 285 Day Counter N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 070: Stored value 2048 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 071: Stored value 65535 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 072: Stored value 32878 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 073: Stored value 3 N/A N/A N/A N/A

Page 34

-------------------------------------------------------------------------------Adaptation Channel 074: Stored value 70 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 075: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 076: Stored value 255 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 150: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 151: Stored value 0 N/A N/A N/A N/A

Page 35

-------------------------------------------------------------------------------19-CAN Gateway -------------------------------------------------------------------------------Long Adaptation Channel 001: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 002: Stored value - N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 003: Stored value 0 0.01 Test Complete N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 004: Stored value 4F0915105E JCB 590422M0JZ N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 005: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 006: Stored value 0 N/A N/A N/A N/A --------------------------------------------------------------------------------

Page 36

Long Adaptation Channel 007: Stored value 010000 N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 008: Stored value 0C0C0C0C0C0C0C0C64006400640064006400640064006400 N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 009: Stored value 0A000A000A000A0000000000140014001400140014001400000000000A000A000A000A000A000A00 N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 010: Stored value 0000000000000000000000000000080708075A000B0003006D070D00030070170000000000000000 N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 016: Stored value -N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 017: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Long Adaptation Channel 037: Stored value - - - -

Page 37

N/A N/A N/A N/A -------------------------------------------------------------------------------A continuer après 120 (je n’ai pas fini ce scanning jusqu’à 255)

Page 38

-------------------------------------------------------------------------------46-Central Conv. -------------------------------------------------------------------------------Adaptation Channel 001: Stored value 127 Personalization - Key 1 YZ Note CL = Central locking N/A SCL = Selective central locking N/A With selective central locking, the driver's door and the tank flap (and the relevant door or the boot; set via adaption channel 1-4, individually for each key) are fully unlocked in response to N/A the first unlock command via the lock cylinder or the radio remote control; the remaining doors and the tailgate are only de-safed. On the second unlock command the remaining doors and N/A the tailgate are also fully unlocked.

I Channels 1 to 4: SCL functions and personalisation, keys 1 to 4 -------------------------------------------------------------------------------Adaptation Channel 002: Significance Description Default setting 1 Front passenger door (CL = active SCL = inactive) Stored value 127 2 Rear left door (CL = active SCL = inactive) 4 Rear right door (CL = active SCL = inactive) Personalization - Key 2 8 Boot (CL = active SCL = inactive) N/A 16 Autolock (CL = active SCL = active) 32 Front windows convenience opening (CL = inactive SCL = N/A inactive) N/A 64 Rear windows convenience opening (CL = inactive SCL = inactive) N/A 128 Open sun roof (CL = inactive SCL = inactive) 256 Rear roller blind automatic control 512 Dimming value - interior light = 1% -------------------------------------------------------------------------------1024 Dimming value - interior light = 2% 2048 Dimming value - interior light = 4% Adaptation Channel 003: 4096 Dimming value - interior light = 8% Stored value 31 8192 Dimming value - interior light = 16% inactive) Personalization - Key 3 16384 Dimming value - interior light = 32% N/A inactive) 32768 Dimming value - interior light = 64% N/A inactive)

N/A N/A

(CL = inactive SCL = inactive) (CL = inactive SCL = inactive) (CL = inactive SCL = inactive) (CL = inactive SCL = inactive) (CL = inactive SCL = inactive) (CL = inactive SCL = (CL = inactive SCL = (CL = inactive SCL =

(CL = 31 SCL = 16) YZNote The central locking settings (front passenger door, rear left door, rear right door, boot, Autolock),window settings (convenience opening, rear roller blind) and dimming value settings can also be made by way of the MMI menu.

-------------------------------------------------------------------------------To be able to dim the interior lights, the lighting package must be fitted and coded in the Adaptation Channel 004: convenience system central control unit -J393. The interior lights comprise the door contour Stored value 31 lighting and the footwell lights. The dimming maximum brightness value can only be adjusted to a maximum of 100%. Personalization - Key 4 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 013: Stored value 23 N/A N/A N/A N/A

Page 39

-------------------------------------------------------------------------------Adaptation Channel 050: I Adaptive brake light (channel 50) Stored value 1 Significance Description 1 Emergency braking flash Adaptive Brake Light 2 Brake light area enlargement N/A YZNote Emergency braking flash N/A - Automatic activation of hazard warning lights on emergency braking N/A Brake light area enlargement - Enlargement of active brake light surface area on emergency braking N/A -------------------------------------------------------------------------------Adaptation Channel 060: Stored value 1 N/A N/A N/A N/A -------------------------------------------------------------------------------I Channel 61: Convenience functions Adaptation Channel 061: Stored value 783 Significance Description 1 Convenience closing via remote for window lifters Comfort Functions 2 Convenience opening via remote for window lifters 4 Convenience closing via radio for sun roof N/A 8 Convenience opening via radio for sun roof N/A 16 Convenience closing via WL switch DD for WL 32 Convenience opening via WL switch DD for WL N/A 64 Convenience closing via WL switch DD for sun roof N/A 128 Convenience opening via WL switch DD for sun roof 256 Convenience closing via lock button for window lifters 512 Convenience closing via lock button for sun roof YZ Note Lock button = Central locking button in exterior door handle

-------------------------------------------------------------------------------Adaptation Channel 062: I Channel 62: CL functions Stored value 7 Central Locking Functions Significance Description 1 Central locking close flashing N/A 2 Central locking open flashing N/A 4 Terminal 87 USA logic N/A N/A

Page 40

-------------------------------------------------------------------------------56-Radio -------------------------------------------------------------------------------Adaptation Channel 017: Stored value 65535 106.70 53.0 (no units) 59.0 (no units) 60.0 (no units)

-------------------------------------------------------------------------------Adaptation Channel 019: Stored value 65535 65535 Count 54.0 (no units) Done N/A -------------------------------------------------------------------------------Adaptation Channel 020: Stored value 65535 65535 Count 54.0 (no units) Done N/A -------------------------------------------------------------------------------Adaptation Channel 022: Stored value 0 106.70 54.0 (no units) 59.0 (no units) Done -------------------------------------------------------------------------------Adaptation Channel 024: Stored value 0 65535 Count 53.0 (no units) Done N/A -------------------------------------------------------------------------------Adaptation Channel 025: Stored value 0 65535 Count 53.0 (no units) Done N/A

Page 41

-------------------------------------------------------------------------------Adaptation Channel 083: Stored value 20 0.0 (no units) N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 085: Stored value 6 0.0 (no units) N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 096: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 099: Stored value 2 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 100: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 112: Stored value 20 000000 Bin. Bits N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 113: Stored value 0 TT

Page 42

N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 114: Stored value 1000 000000 Bin. Bits N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 115: Stored value 2000 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 116: Stored value 12 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 117: Stored value 500 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 118: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 119: Stored value 2 0.0 (no units) 0 /min RPM N/A N/A

Page 43

-------------------------------------------------------------------------------Adaptation Channel 120: Stored value 0 000000 Bin. Bits N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 128: Stored value 0 N/A N/A N/A N/A

Page 44

-------------------------------------------------------------------------------5F-Information Electr. -------------------------------------------------------------------------------Adaptation Channel 001: Stored value 100 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 002: Stored value 15 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 003: Stored value 10 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 005: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 006: Stored value 1 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 007: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 008: Stored value 3 N/A N/A N/A N/A

Adaption channel 6: HIDDEN MENU 0 : Hidden menu disabled 1 : Hidden menu enabled

Page 45

-------------------------------------------------------------------------------Adaptation Channel 015: Stored value 0 5842 Count N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 018: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 020: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 031: Stored value 0 0 Count 0 /min RPM N/A N/A -------------------------------------------------------------------------------Adaptation Channel 032: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 033: Stored value 0 0x0000 Hex Value 0.00 % 0 Count N/A -------------------------------------------------------------------------------Adaptation Channel 034: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 036: Stored value 0

Page 46

N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 047: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 049: Stored value 0 0.0 % Load 5.9 % Load N/A N/A -------------------------------------------------------------------------------Adaptation Channel 050: Stored value 15 0.0 % Load 5.9 % Load N/A N/A -------------------------------------------------------------------------------Adaptation Channel 051: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 052: Stored value 0 9.0 % Load not available not available N/A -------------------------------------------------------------------------------Adaptation Channel 053: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 096: Stored value 0 N/A N/A N/A

Page 47

N/A -------------------------------------------------------------------------------Adaptation Channel 112: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 117: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 122: Stored value 0 N/A N/A N/A N/A -------------------------------------------------------------------------------Adaptation Channel 123: Stored value 255 N/A N/A N/A N/A

Page 48