During the connection, you can select the following functions by clicking the ... Click the box to keep the repeat record, or unclick the box to ignore the repeat ...
To use UT804 Interface Program, you need the following hardware and software: An IBM PC or equivalent computer with 80486 or higher processor and 800 x 600 pixel or better monitor. Microsoft Windows 98 or above. At least 8MB of RAM. At least 8MB free space in hard drive. Can access to a local or a network CD-ROM. A free serial port or USB port. A mouse or other pointing device supported by Windows.
1
UT804 Computer Interface Software
B.
Installing UT804 Interface Program
To install UT804Interface Program, please follow below procedure: Before install the interface program, make sure that the computer is running the Window 95 or above operating system. 1. -Insert the provided CD-ROM into CD-ROM drive. -Double-click the My Computer icon from the Windows desktop. -Locate the CD-ROM drive from the window, double-click the drive letter to display the folder of UT804. -Double-click UT804 to display the contents of the folder. -Double-click the file Setup.Exe. 2. Follow the on-screen installation instructions. 3. The installation program will create a DMM Interface Program folder. You will be prompted to select the kind of Program Folder you want to install; you should select “UT804 Interface Program”.
2
UT804 Computer Interface Software
C.
Getting Started with UT804 Interface Program
To run the UT804 Interface Program, please do the followings: 1.
Insert the supplied RS232C (I) interface cable into the slot at the back of the meter and properly connect the other end of the cable to the serial port of computer. “NO COM” will be displayed on the computer screen if it is not connected properly.
2.
From the Windows Start menu, choose Programs >DMM Interface Program > UT804
3.
Press COMSetup to select corresponding COM 1/2/3/4 or connect the USB cable to the Meter then press “USB Connect”.
4.
Press Connect from menu bar to start the connection, the icon
3
will be displayed.
UT804 Computer Interface Software
D.
Graphical Operations (see figure 1)
During the connection, you can select the following functions by clicking the corresponding icon: Fill: Click the box to select “fill-up graph” or unclick to select “line graph”. Record: Setting the number of record to show on graph. Clear: To clear all the graphics records permanently. Save: To save a file in BMP format. The default file name is C:\DATA1.BMP”. First: Go to the first graphic. Previous: Go to the previous graphic. Next: Go to the next graphic. Last: Go to the last graphic. Zoom In: To enlarge part of the graphic.
4
UT804 Computer Interface Software
Next Graphic Selection Clear
Previous
Zoom In Last
No. of records setting
First Save
Fill-Up Graph
(figure 1)
5
UT804 Computer Interface Software
E.
Data Recording Operations (see figure 2)
During the connection, you can select the following functions by clicking the corresponding icon: Repeat: Click the box to keep the repeat record, or unclick the box to ignore the repeat record. Sampling Interval: Click to enable sampling interval function, or unclick to disable the function Enter the sampling interval time, the unit is second. Clear: To clear all the records permanently. Save: To save all the record. RecallData: Click to recall data with the measuring time before you input the StartTime and Interval. The default StartTime is 00:00:00 and interval time is 1 second. Or you could press the Recall button at the Multimeter with the default StartTime and interval. StartTime: Data store starting time. Hours, minutes and seconds. Interval: Input the data store interval time.
6
UT804 Computer Interface Software
Keep or ignore the
Sampling interval
repeat record
selecting
Click to select data recall
Enter the time
Data store starting time
Clear
Save
Data store interval time
(figure 2)
F.
Max Min Operations (see figure 3)
MIN: Recorded maximum value. MIN: Recorded minimum value. SetMax: Click to enable the SetMax function or unclick to disable. Enter the upper limit value in full digit, it does not identify range or function. SetMin: Click to enable the SetMin function or unclick to disable. Enter the lower limit value in full digit, it does not identify range or function. The Meter is connected properly to the computer and data is recording. 7
UT804 Computer Interface Software
OL!!
Overload, the recorded value exceeds the SetMax and SetMin value. It will be flashing and the computer will sound if loudspeaker is installed.
Upper limit setting
Enable SetMax function Recorded maximum value.
Recorded minimum value
Lower limit setting
Connected & data recording
Red line indicates limits exceeding
Remarks:
（figure 3）
Overload
1.
Before you re-install the software, please remove the installed program as follows: My Computer > Control Panel > Add/Remove Programs 2. If abnormal digits or symbols were found, please remove font ”UNIT-A2””UNIT-A3” and then install new font set from ”FONT” directory on the provided CD-ROM. 8
UT804 Computer Interface Software
3.
No special notice or free replacement will be provided when update version is issued.
**END** * This operating manual is subject to change without notice. *
Follow the on-screen installation instructions. 3. ... Interval: Click to enable sampling interval function, or unclick to disable the function ... Print the data record.
Follow the on-screen installation instructions. 3. ... 2. Left click Device Manager and select USB Serial Port as shown below picture and click Confirm.
During the connection, you can select the following functions by clicking the ... Click the box to keep the repeat record, or unclick the box to ignore the repeat ...
The application you are installing requires the Microsoft .NET framework version 3.5 to run. You can download the Microsoft .NET Framework 3.5 SP1 package ...
Stacy Stegosaurusruns the Steak-A-Saurus diner oft. Route 5 1/2 deep in the desert. She cooks her patties on a solar-powered grill and saves aluminum cans.
Below is the full screen of the software shown on the computer (see figure 2) ... Click to enable sampling interval function, or unclick to disable the function ... print: To print the current records. (figure 4). F. Max Min Operations (see figure 5)
1. A. System Requirements. To use UT60A Interface Program, you need the following ... the cable to the serial port of computer as shown on below figure 1.
At least 8MB free space in hard drive. â Can access to a local ... LCD Display Area. Analogue Bar Graph ... You could download the most updated version from ...
Dec 22, 1998 - Abstract: Guidance for the development of the set of requirements, System Requirements Speci- fication (SyRS), that will satisfy an expressed ...
ject, secondly a number of viable wireless technologies that can support the ...... The Sony Ericsson mobile phone is used as a modem in combination with.
Jan 25, 2005 - Observe the following guidelines when servicing electrical equipment: v Check .... The power control button on the device and the power switch on the power ... This document is in PDF on the IBM System x Documentation CD. ..... The opt
Important Note: To comply with the FCC/IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the ...
Moving people, equipment, and ... not to move when their involvement in a team ends. Even- tually ..... at his design and suggest a solution to a tricky problem.
The engine driven fuel pump outlet fitting (A) is drilled and tapped to provide a source for the .... system installation or the design of the individual ... calculation with a dipstick reading. (provided ... and ducting cooling air through it. b. En
Feb 14, 2013 - Polish, Korean, Japanese, Italian, Dutch, Portuguese, Spanish, ... There you can find instructions on file/session/project management, editing, .... If your language name is the first ever in the table to start with some letter, say Ð
8 mars 2016 - Question #6: The first item under Cables and connectors is not specific ... Response #8: See Annex A, Line G44 Pasternack Cable, Type ...
Requirements for Lateral Stability and Control ... to arrive at a design with satisfactory stability and con- ..... at a time when other production ships had adopted ...
8 mars 2016 - Insert : Solicitation Closes â L'invitation prend fin at â Ã 02 :00 PM on â le 2016-03-11. 2) Response to bidder questions (Q&A):. Question #1: ...
vide you with the information you'll need to develop the requirements document. Domain Experts ... Be firm; excluding the actual users is not a viable option.
Total bandwidth must support 25 kbps Down/10 kbps Up for each Delivery workstation. Windows XP Professional (32 bit) with Service Pack 3, NTFS file system.
Cat: Agroenvironnement, Écologie, Sciences naturelles, Culture des plantes ..... pratiques du commerce par la voie du numérique mais aussi celles du ...
