PTR08060W www.ti.com ....................................................................................................................................................... SLTS289E – AUGUST 2007 – REVISED APRIL 2009
6-A, 4.5-V to 14-V INPUT, NON-ISOLATED, ADJUSTABLE WIDE-OUTPUT, SWITCHING REGULATOR FEATURES
APPLICATIONS
• • •
• • • •
1
• • • • • • •
Up to 6-A Output Current Wide Input Voltage Range (4.5 V to 14 V) Wide-Output Voltage Adjust (0.6 V to 5.5 V) Efficiencies Up To 96% ON/OFF Inhibit Undervoltage Lockout (UVLO) Output Overcurrent Protection (Nonlatching, Auto-Reset) Overtemperature Protection Ambient Temp. Range: –40°C to 85°C Space Saving Vertical SIP Package
Instrumentation Consumer Electronics Servers General-Purpose Circuits
DESCRIPTION The PTR08060W is a highly integrated, low-cost switching regulator module that delivers up to 6 A of output current. Occupying approximate PCB area of a standard TO-220 linear regulator IC, the PTR08060W provides output current at a much higher efficiency and with much less power dissipation, thereby eliminating the need for a heat sink. Their small size (0.65 x 0.41 in), high efficiency, and low cost makes these modules attractive for a variety of applications. The input voltage range of the PTR08060W is from 4.5 V to 14 V, allowing operation from either a 5-V or 12-V input bus. Using state-of-the-art switched-mode power-conversion technology, the PTR08060W can step down to voltages as low as 0.6 V. The output voltage can be adjusted to any voltage over the range, 0.6 V to 5.5 V, using a single external resistor. Operating features include an undervoltage lockout (UVLO), on/off inhibit and output overcurrent protection. Target applications include servers, test and measurement applications, and high-end consumer products.
VI
2
VI
VO
4
VO
PTR08060W
Inhibit 1
Inhibit
CI 100 mF (Required) GND
GND
VOAdjust
3
5 RSET 1%, 0.05 W
CO 100 mF (Required)
L O A D
GND UDG-07129
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.
Copyright © 2007–2009, Texas Instruments Incorporated
PTR08060W SLTS289E – AUGUST 2007 – REVISED APRIL 2009 ....................................................................................................................................................... www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
ORDERING INFORMATION For the most current package and ordering information, see the Package Option Addendum at the end of this datasheet, or see the TI website at www.ti.com.
ABSOLUTE MAXIMUM RATINGS over operating free-air temperature range unless otherwise noted (1) UNIT TA
Operating free-air temperature
Over VI range
Twave
Wave solder temperature
Surface temperature of module body or pins (5 seconds maximum)
Tstg
Storage temperature
Storage temperature of module removed from shipping package
Tpkg
Packaging temperature
Shipping Tray storage or bake temperature
(1) (2)
-40 to 85 260
(2)
°C
-55 to 125 45
Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. This product is not compatible with surface-mount reflow solder processes.
RECOMMENDED OPERATING CONDITIONS MIN
MAX
VI
Input voltage
4.5
14
UNIT V
TA
Operating free-air temperature
–40
85
°C
PACKAGE SPECIFICATIONS PTR08060W
UNIT
Weight Flammability Mechanical shock Mechanical vibration (1)
2
2.74 grams Meets UL 94 V-O Per Mil-STD-883D, Method 2002.3, 1 msec, 1/2 sine, mounted Mil-STD-883D, Method 2007.2, 20-2000 Hz
250 G 15 G
(1) (1)
Qualification limit.
Submit Documentation Feedback
Copyright © 2007–2009, Texas Instruments Incorporated
Product Folder Link(s): PTR08060W
PTR08060W www.ti.com ....................................................................................................................................................... SLTS289E – AUGUST 2007 – REVISED APRIL 2009
ELECTRICAL CHARACTERISTICS at 25C free-air temperature, VI = 12 V, VO = 3.3 V, IO = IO(Max), CI = 100 µF, CO = 100 µF (unless otherwise noted) PARAMETER IO
Output current
TEST CONDITIONS
MIN
TA = 85°C, 100LFM airflow
TYP
MAX
0 0.6 V ≤ VO ≤ 3.6
4.5
3.6 V < VO ≤ 5.5
VO /0.83 (2)
6 14
UNIT A
(1)
VI
Input voltage range
Over IO range
VO(adj)
Output voltage adjust range
Over IO range
Set-point voltage tolerance
TA = 25°C
Temperature variation
-40°C ≤ TA ≤ +85°C
±0.2
% VO
Line regulation
Over VI range
±0.3
% VO
Load regulation
Over IO range
±0.5
Total output voltage variation
Includes set-point, line, load, –40°C ≤ TA ≤ +85°C
VO
0.6
Efficiency
ILIM
92 %
(2)
95 %
UVLO
TA = 25°C VI = 5 V IO = 5 A
20 MHz bandwith
Overcurrent threshold
Reset, followed by autorecovery
Undervoltage lockout
Inhibit control (pin 1)
RSET = 619 Ω, VO = 2.5 V
93 %
RSET = 976 Ω, VO = 1.8 V
91 %
RSET = 1.3 kΩ, VO = 1.5 V
90 %
RSET = 1.91 kΩ, VO = 1.2 V
88 %
RSET = 2.87 kΩ, VO = 1 V
86 %
RSET = 10.7 kΩ, VO = 0.7 V
84 %
2.5 A/µs load step from 50 to 100% IOmax
A µs
VO over/undershoot
150
mV
Input high voltage (VIH)
2.8
Input low voltage (VIL)
–0.3
Input low current (IIL) Switching frequency
Over VI and IO ranges
CI
External input capacitance
100
(5)
100
(6)
Equivalent series resistance (non-ceramic)
5
(8)
Per Bellcore TR-332, 50% stress, TA = 40°C, ground benign
13.7
Non-ceramic CO
External output capacitance
MTBF
(1) (2) (3) (4) (5) (6) (7) (8)
Calculated reliability
mVPP
50
4.25
FS
% VO
10
3.8
Pin 1 to GND
V % VO
Recovery time
VI = decreasing
Input standby current
(3)
50
VI = increasing
II(stby)
(3)
V
% VO ±3
RSET = 267 Ω, VI = 12 V, VO = 5 V (2)
Output voltage ripple
Transient response
5.5 ±2
RSET = 432 Ω, VO = 3.3 V
η
14
Ceramic
4.4
3.95 6
V
(4)
0.6
V
–125
µA
1
mA
300
kHz µF 3000
22
(6)
(7)
100
µF mΩ 106 Hrs
For output voltages less than 1.0 V, the output ripple may increase (up to 2×) when operating at input voltages greater than (VO ×15). The minimum input voltage is 4.5 V or (VO/0.83) V, whichever is greater. The set-point voltage tolerance is affected by the tolerance and stability of RSET. The stated limit is unconditionally met if RSET has a tolerance of 1% with with 100 ppm/°C or better temperature stability. This control pin has an internal pullup to the input voltage VI. If it is left open circuit, the module operates when input power is applied. A small low-leakage (
