8
7
D
STATIC PRESSURE PORTS (PITOT-STATIC PROBES) 4 HOLES ON TOP, OPPOSITE THE DRAIN HOLE, 5 HOLES ON BOTTOM
4
5
6
This drawing contains design and other information which is the property of SpaceAge Control, Inc. Except for rights expressly granted by contract to the United States Government, this drawing and data disclosed herein or herewith is not to be reproduced, used, or disclosed in whole or in part to anyone without the written permission of SpaceAge Control, Inc.
28-VOLT OR 12-VOLT OPERATION
L-SHAPED PROBES
3
STRAIGHT PROBES (SEE SHEET 3)
HTR
SCHEMATIC
D
4X MOUNTING THREADS
ALUMINUM BODY, UNHEATED
ALUMINUM BODY, UNHEATED
PITOT (TOTAL) PRESSURE
6X MOUNTING HOLES FOR NO. 6 X 100 FLAT HEAD SCREWS
FLYING LEADS, RED, TEFLON, 22 GAUGE, MIL-W-16878/4 TYPE EE
PITOT DRAIN HOLE ON BOTTOM - OPTIONAL LOCATION UPON REQUEST, SEE "DETAIL Z"
C
C ALUMINUM MOUNTING FLANGE
HEATED NOSE, SAME AS L-PROBE
PNEUMATIC CONNECTIONS, SEE SHEET 2
PROBE TYPE
SHAPE
INTERFACE
WEIGHT
PITOT-STATIC
L-SHAPED
RIGID, FITTING
.24 LB MAX
PITOT-STATIC
STRAIGHT
RIGID, FITTING
.24 LB MAX
PITOT-STATIC
L-SHAPED
FLEX, NO FITTING
.29 LB MAX
PITOT-STATIC
L-SHAPED
FLEX, FITTING
.24 LB MAX
PITOT-STATIC
STRAIGHT
FLEX, NO FITTING
.24 LB MAX
PITOT-STATIC
STRAIGHT
FLEX, FITTING
.24 LB MAX
PITOT
L-SHAPED
RIGID, FITTING
.24 LB MAX
PITOT
STRAIGHT
RIGID, FITTING
.24 LB MAX
PITOT
L-SHAPED
FLEX, NO FITTING
.24 LB MAX
PITOT
L-SHAPED
FLEX, FITTING
.29 LB MAX
PITOT
STRAIGHT
FLEX, NO FITTING
.24 LB MAX
PITOT
STRAIGHT
FLEX, FITTING
.24 LB MAX
PART NO. 4207-01 4207-02 4207-03 4207-04 4207-05 4207-06 4207-07 4207-08 4207-09 4207-10 4207-11 4207-12
FLYING LEADS, RED, TEFLON, 22 GAUGE, MIL-W-16878/4 TYPE EE
B
1
PNEUMATIC CONNECTIONS, SEE SHEET 3
(SEE SHEET 2)
HEATED NOSE, STAINLESS STEEL
2
NOTES (UNLESS OTHERWISE SPECIFIED): 1. DESCRIPTION: HEATED PITOT AND PITOT-STATIC PROBES, L-SHAPED AND STRAIGHT. 2. WEIGHT: SEE CONFIGURATION TABLE 3. HEATER CHARACTERISTICS: 28-VOLT, SELF-REGULATING. HEATER RESISTANCEINCREASES AS EMPERATURE INCREASES. MAXIMUM POWER IS ACHIEVED IN HIGH AIRFLOW IN ICING CONDITIONS. • • •
CONTINUOUS POWER (STEADY STATE): 50 WATTS MAX POWER IN STILL AIR CONDITIONS: 30 WATTS MAX INITIAL SURGE AT POWER-UP: 150 WATTS MAX (DROPS TO CONTINUOUS LEVELS IN LESS THAN 30 SECONDS)
B
4. ANTI-ICING PERFORMANCE: WITHSTANDS SEVERE IN-FLIGHT ICING CONDITIONS SUCH AS: -30 C STATIC TEMPERATURE 300 KNOTS TRUE AIRSPEED 1.0 g/m^3 LIQUID WATER CONTENT
• • •
A
NOTE: THE NOSE IS HEATED BUT THE VERTICAL STRUT IS UNHEATED AND ICE CAN FORM OVER TIME. LIMIT THE TIME DURATION IN SEVERE CONDITIONS (PER ABOVE) TO 10 MINUTES MAXIMUM. A PROPORTIONALLY HIGHER DURATION IS POSSIBLE FOR LOWER LIQUID WATER CONTENT CONDITIONS, OR LOWER TRUE AIRSPEED CONDITIONS.
OPTIONS AVAILABLE UPON REQUEST: • 12-VOLT HEATERS • DRAIN HOLE ORIENTATION, SEE "DETAIL Z" • PNEUMATIC CONNECTION TYPE AND LENGTH • AIRCRAFT-SPECIFIC MOUNTS 8
7
6
SPA PN 4207-XX
NOSE POINTING "OUT" FROM PAGE
"X"
0 DRAIN HOLE LOCATION
(WHERE "XX" IS DASH NO.)
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ARE: DECIMALS ANGLES
DRAWN
DATE
B.P. 11-22-06
HEATED PROBE, MINIATURE, PITOT OR PITOT-STATIC
APPROVALS
DO NOT SCALE DRAWING MATERIAL
SEE NOTES
DETAIL Z
OPTIONAL DRAIN HOLE ORIENTATIONS, AVAILABLE UPON REQUEST (X = 90 , 180 , 270 ) 5
4
FINISH
3
SEE NOTES
CAD GENERATED DRAWING, DO NOT MANUALLY UPDATE
A
PROJECT 170
CHECKED
DIGITAL - ON FILE ENG
DIGITAL - ON FILE
SIZE
SCALE
2
CAGE CODE
B 34851
DWG. NO.
CAD FILE:
4207 1
REV. SHEET
1
K
OF
3
8
7
D
4
5
6
3
2
1
L-SHAPED PROBES
This drawing contains design and other information which is the property of SpaceAge Control, Inc. Except for rights expressly granted by contract to the United States Government, this drawing and data disclosed herein or herewith is not to be reproduced, used, or disclosed in whole or in part to anyone without the written permission of SpaceAge Control, Inc.
PROBE WITH FLEX NYLON LINES AND SWAGELOK FITTINGS
PROBE WITH SWAGELOK FITTINGS
50.0°
D 40.0° 2.005 1.995
30.0° 1.50 .50
UNHEATED STRUT
1.90 1.50
STAINLESS STEEL TUBES
C
30.0° 40.0°
.28 X 100 FOR NO. 6 FLAT HEAD SCREW 6X
LABELLED "TOTAL"
2.60 2.20
LABELLED "STATIC" PRESSURE FITTINGS SWAGELOK PN SS-102-1
.155 .145 .005 M A 6X
FLEXIBLE NYLON 2X
102.0 96.0
LABELLED "TOTAL"
60.0°
LABELLED "STATIC"
C
4.50 1.00 3.50 3.09
PRESSURE FITTINGS SWAGELOK PN SS-102-1
PROBE WITH FLEX NYLON LINES
2.00
B
B
1.55
HEATED NOSE
2.08
.313
UNHEATED STRUT .078 .070 LABELLED "TOTAL"
LABELLED "STATIC"
2X
A
A
2X
26.0 (LEADS) 22.0
A
102.0 96.0
FLEXIBLE NYLON .090 O.D. X .055 I.D. SIZE
CAGE CODE
B 34851
SCALE
8
7
6
5
4
3
2
DWG. NO.
REV.
4207 SHEET
CAD FILE:
1
2
OF
K 3
8
7
This drawing contains design and other information which is the property of SpaceAge Control, Inc. Except for rights expressly granted by contract to the United States Government, this drawing and data disclosed herein or herewith is not to be reproduced, used, or disclosed in whole or in part to anyone without the written permission of SpaceAge Control, Inc.
4
5
6
3
STRAIGHT PROBES
LABELLED "STATIC" (LONG TUBE)
2
1
2.50 2.10
STAINLESS STEEL TUBES
D
D
STRAIGHT PROBE WITH RIGID TUBES AND SWAGELOK FITTINGS LABELLED "TOTAL" (SHORT TUBE)
PRESSURE FITTINGS SWAGELOK PN SS-102-1
1.80 1.40 2X
102.0 96.0
LABELLED "TOTAL"
STRAIGHT PROBE WITH FLEX NYLON LINES LABELLED "STATIC"
FLEXIBLE NYLON .090 O.D. X .055 I.D.
C
C
FLEXIBLE NYLON
LABELLED "TOTAL"
STRAIGHT PROBE WITH FLEX NYLON LINES AND SWAGELOK FITTINGS LABELLED "STATIC"
102.0 2X 96.0
B
4X NO. 2-56 UNC-2B EQUALLY SPACED
3.09
2X
B
26.0 (LEADS) 22.0
.36 HEX CLEARANCE
.48
1.55
2X .312 HEX STATIC PRESSURE PORTS (P-S PROBES)
.313
.399 .397
A
7.88
A
.40 9.43 SIZE
CAGE CODE
B 34851
SCALE
8
7
6
5
4
3
2
DWG. NO.
CAD FILE:
4207 1
REV. SHEET
3
OF
K 3
