Headboard. 1. 1. Tête de lit. Cross bar end. 1. 1. Traverse de bout. Side rails. 2. 2 ... Lock nut 1/4â. 8. 10. Ãcrou de blocage 1/4â. A. B. C. D. E. F. G. H. I. 1/4-20NC.
MATTRESS SUPPORT - PLATFORM TYPE SUPPORT DE MATELAS - TYPE PLATEFORME
16054-RT / 16060-RT / 16078-RT
Thank you for choosing an Amisco product Merci d’avoir choisi un produit Amisco IMPORTANT Dealer or installer: Leave all documents to the consumer.
Détaillant ou installateur: Laissez tous les documents au consommateur. Consumer: Keep this document and the warranty sheet with your proof of purchase for reference. Consommateur: Conservez ce document et la feuille de garantie avec votre preuve d’achat pour référence.
Problems or information? Do not contact or return your product to the store
Contact us within 30 days from your purchase date. Monday to Friday, from 8:30 a.m. to 12 p.m., 1 p.m. to 4:30 p.m. (Eastern standard time). Keep handy your proof of purchase and the Amisco product number when calling.
www.amisco.com 1 800 361-6360
Ne contactez pas le magasin, ne retournez pas votre produit
Problèmes ou information? Contactez-nous dans les 30 jours suivant votre achat. Du lundi au vendredi, de 8h30 à 12h00, 13h00 à 16h30 (heure de l’Est). Ayez sous la main votre preuve d’achat et le nuAmisco product number/Numéro du produit Amisco méro de produit Amisco au moment d’appeler.
WARNING: THIS MATTRESS SUPPORT IS NOT MADE FOR A FUTON OR A WATER MATTRESS.
ATTENTION: CE SUPPORT DE MATELAS N’A PAS ÉTÉ CONÇU POUR RECEVOIR UN FUTON OU UN MATELAS D’EAU.
IF YOU WANT TO USE IT WITH A FUTON ONLY, AN OPTION IS AVAILABLE: 62004-60 TR
UNE OPTION EST DISPONIBLE AFIN D’UTILISER AVEC UN FUTON SEULEMENT: 62004-60TR
TWO (2) PEOPLE ARE REQUIRED TO ASSEMBLE THIS PRODUCT LIST OF TOOLS REQUIRED: - A phillips screwdriver. - A mallet. - An allen key 5/32” and 3/16” (included). - A 7/16”key or adjustable wrench. IMPORTANT: In order to prevent any damage to this product, DO NOT USE ANY POWER TOOLS to assemble it.Assemble this product manually.
DEUX (2) PERSONNES SONT REQUISES POUR ASSEMBLER CE PRODUIT LISTE DES OUTILS NÉCESSAIRES: - Un tournevis étoile. - Un maillet. - Une clé allen 5/32” et 3/16” (incluse). - Une clé 7/16” ou une clé à molette. IMPORTANT: Afin de prévenir tout dommage à ce produit, NE PAS UTILISER D’ OUTILS ÉLECTRIQUES pour son assemblage. Assembler ce produit manuellement.
1
HARDWARE LIST / LISTE DE LA QUINCAILLERIE PARTS LIST / LISTE DES PIÈCES
In hardware bags of headboard and mattress support.
ITEM
ITEM
DESCRIPTION
QTY 54”/60”
Headboard Tête de lit Cross bar end Traverse de bout Side rails Fer angle Cross bar Traverse Panel Panneau Support leg Patte support Hardware bag Sac de quincallerie
1 2 3 4 5 6 7
78’’
A
1
1
B
1
1
C
2
2
D
6
6
E
6
6
F
2
3
G
1
1
H
Dans les sacs de la tête de lit et du support de matelas.
DESCRIPTION Bolt 3/4”(allen) Boulon 3/4”(allen) Bolt (allen) Boulon (allen) Screw R.H. 1 7/8” - 10 Vis T.R. 1 7/8” - 10 Bolt 40 mm (allen) Boulon 40 mm (allen) Flat washer 1/4” Rondelle plate 1/4” Cross bars connector Fixation de traverses Flat glide 3/4” x 3/4” Glisseur plat 3/4” x 3/4” Flat glide 1 1/2”x1/2” Glisseur plat 1 1/2”x1 1/2” Lock nut 1/4” Écrou de blocage 1/4”
I
54’’/60’’ 78’’ 1/4-20NC
4
4
1/4-20NC
4
4
14
14
4
6
4
4
14
14
2
3
2
2
8
10
1/4-20NC
1/4-20NC
1) Insert G and H glides. Insérer les glisseurs G et H .
6
2 H
G
2) Screw-on lightly two A bolts in the top holes of the cross bar end 2 . Visser légèrement deux boulons A dans les trous du haut de la traverse de bout 2 .
3) Hook on each side rail to the A bolts. Accrocher chaque fer angle aux boulons A .
4) Screw-on lightly the side rails 3 to the cross bar end 2 with the remaining A bolts. Visser légèrement les fers angles 3 à la traverse de bout 2 à l’aide des boulons A restants. 5) Tighten all bolts. Resserrer tous les boulons.
2
2
2
A
A
A
3
3
2
M656480144 / Revision: 0, 22-10-2012 G.L.
6) Screw-on lightly two B bolts in the second top holes (12”) of the headboard 1 with E flat washers and I nuts. Visser légèrement deux boulons B dans les deuxièmes trous du haut (12”) de la tête 1 avec des rondelles E et des écrous I .
7) Hook on each side rail to the B bolts. Accrocher chaque fer angle aux boulons B .
8) Screw-on lightly the side rails 3 to the headboard 1 with the remaining B bolts, E flat washers and I nuts. Visser légèrement les fers angles 3 à la tête de lit 1 à l’aide des boulons B restants, des rondelles E et des écrous I . 9) Tighten all bolts and nuts. Resserrer tous les boulons et écrous.
1
1
1
E I B
3
3
E I
B
B 12
12
10
3
2
10) Clip-on F connectors on both side rails 3 and align holes. Insérer les fixations F sur les fers angles 3 et aligner les trous.
F
C
F
11) Place the cross bars 4 in F connectors of side rails 3 . Align holes, insert C screws in F connectors and screw-on lightly. Placer les traverses 4 dans les fixations F des fers angles 3 . Aligner les trous, insérer les vis C dans les fixations F et visser légèrement.
4
3
3
12) Screw-on the support legs 6 under cross bars 4 with D bolts and I nuts. Visser les pattes support 6 sous les traverses 4 à l’aide des boulons D et des écrous I .
54”&60”
78” D
4
SUPPORTLEGS PATTESSUPPORT
I
6
SUPPORTLEGS PATTESSUPPORT
F 5 13) Place panels 5 on the cross bars, lift panels by the center to insert both ends under F connectors. Placer les panneaux 5 sur les traverses. Lever les panneaux par le centre et insérer les deux bouts sous les fixations F .
3
C F 5
14) Tighten all C screws. DO NOT OVERTIGHTEN SCREWS. Resserrer toutes les vis C . NE PAS TROP SERRER.
9. Thank you for purchasing this Price Pfister Kitchen Filter Faucet with the builtâin filter by Teledyne Water Pik. Both companies carefully engineer and factory ...
16 août 2016 - 5/64â drill bit and drill 4 pilot holes as shown the hood to .... Push in on knob to release and then .... knobs, handles, or other cosmetic parts. 11.
Illinois. PLAYBOY, PLAYMATES, MISS, CENTERFOLD and RABBIT HEAD design are .... CHARLENE HART You don't have to take out a bank loan to create an ... SHARON PETOCK Nothing much has changed since her rug rat days growing ... She promises to pay us back
water pressure of 40 PSI is recommended. .... Si vous avez des questions au sujet de l'installation de votre robinet de ..... 125 psi (8.8 bar). Max. working temperature: 100_F (38_C). Water flow rating: .5 gal per min. at 60 psi (2 l/m at 4.1bar). W
1) Verify your product on several floor locations to confirm that the product is not level. 2) Put the unassembled product (no seat nor gliders) on a hard level.
and maintenance instructions listed here may cause product damage or injuries. Inspectez périodiquement votre table et resserrez les vis, écrous et boulons. Le non respect des quelques règles de sécurité et de maintenance énumérées ici peut occasionn
3) Prenez le produit par l'une des pattes longues, et frappez forte- ment la patte ... Centrer le siège 2 sur la base 1 et visser à l'aide des vis A . Due to their height, ...
ITEM. DESCRIPTION. QTY. 1) Insert glides E under legs 2. In order to protect certain floor coverings, we suggest you to use self-adhesive felts under legs.
M656480136 Revision: 7, 07-11-2014 G.L. ... ( May happen during shipping. ) 1) ... to follow the basic safety and maintenance instructions listed here may cause.
a rough floor. The metal is flexible, so this operation will not damage your product. 4) Verify your product on the same level surface. Repeat step 3 as necessary.
Un tournevis étoile. - Une clé 7/16” ou .... Étant donné leur hauteur et le mouvement de la plaque pivotante, les tabourets doivent être utilisés avec précaution ...
Periodically inspect your stool and tighten all screws, nuts and bolts.If you find a broken weld or a bent leg, stop using your stool and contact Amisco customer ...
Pour toute question ou tout commentaire, nous contacter. Si tiene dudas o comentarios, contáctenos. 1-800-4-DEWALT • www.dewalt.com. FINAL PRINT SIZE: ...
Amisco product number/Numéro du produit Amisco ... ITEM. DESCRIPTION QTY. 7/8” #10. 4) Center seat 2 on frame 1 , push the seat against the backrest and ...